app_timer

Question

HI, I am using NRF52832 sdk15.2 . 
 I have some doubts 
 How to assign two to three different timers to do different functions 
 1. I need to read the sensor data every one second. and i need to other function for every 5 sec. 
 2. I am using BLE_UART program. 
 i need to send the respective data to the mobile phone for every one sec only after the bluetooth is paired. 
 is it possible to change in ble /uart event handle 
 or we need to use app_timer to resolve this. 
 thank you.....

Sunil vignesh · Accepted Answer

Yeah, When i connect with mobile phone automatically the respective data_array (string) has to print with delay of one sec 
 is it possible to add in this ble_evt_handler() function itself..! 
 static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
 uint32_t err_code;

 switch (p_ble_evt->header.evt_id)
 {
 case BLE_GAP_EVT_CONNECTED:
 NRF_LOG_INFO("Connected");
 bsp_board_led_on(CONNECTED_LED);
 err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
 APP_ERROR_CHECK(err_code);
 m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
 err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
 APP_ERROR_CHECK(err_code);

 err_code = app_button_enable();
 APP_ERROR_CHECK(err_code);
 break;

 case BLE_GAP_EVT_DISCONNECTED:
 NRF_LOG_INFO("Disconnected");
 bsp_board_led_off(CONNECTED_LED);
 // LED indication will be changed when advertising starts.
 m_conn_handle = BLE_CONN_HANDLE_INVALID;
 err_code = app_button_disable();
 APP_ERROR_CHECK(err_code);

 //advertising_start();
 break;

 case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
 {
 NRF_LOG_DEBUG("PHY update request.");
 ble_gap_phys_t const phys =
 {
 .rx_phys = BLE_GAP_PHY_AUTO,
 .tx_phys = BLE_GAP_PHY_AUTO,
 };
 err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
 APP_ERROR_CHECK(err_code);
 } break;

 case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
 // Pairing not supported
 err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
 APP_ERROR_CHECK(err_code);
 break;

 case BLE_GATTS_EVT_SYS_ATTR_MISSING:
 // No system attributes have been stored.
 err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
 APP_ERROR_CHECK(err_code);
 break;

 case BLE_GATTC_EVT_TIMEOUT:
 // Disconnect on GATT Client timeout event.
 NRF_LOG_DEBUG("GATT Client Timeout.");
 err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
 APP_ERROR_CHECK(err_code);
 break;

 case BLE_GATTS_EVT_TIMEOUT:
 // Disconnect on GATT Server timeout event.
 NRF_LOG_DEBUG("GATT Server Timeout.");
 err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
 BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
 APP_ERROR_CHECK(err_code);
 break;

 default:
 // No implementation needed.
 break;
 }
}
 
 after the ble connected 
 possible to add app_timer to send continuously the string to phone with delay of one sec 
 
 and from phone to controller some commands has to be receive to change the axis of the sensor.and respective.. 
 
 both transmission and receive in nrf52.

app_timer

Top Replies