NRF52832 buttonless dfu IAR

[Alex_Golubev]

Hi.

I did the secure bootloader DFU. I attained step 8 in document.

I instal softdevice and secure bootloader to flash nRF52832. After make the ble_app_buttonless_dfu start download and debug but program not start.

If install only softdevice and buttonless_dfu then I got error "No bootloader was found".

If install softdevice and bootloader after buttonless dfu then I got not start programs.

Although security bootloader work. 
The verification was performed in the following steps:

E1. Generate new firmware.

E2. Generate new DFU .zip package.

E3. Switch the device to DFU mode, do DFU update and verify new image is running.

Help me.

[Hung Bui]

Hi Alex, 

Could you test first with a normal application instead of the buttonless example ? For example ble_app_hrs ? 

Buttonless example requires bootloader setting to be generated and flashed. 

I would suggest you to follow the tutorial here. 

[Alex_Golubev]

I made the following:

Step A. Generating keys.

Step B. Build the bootloader.

B1. Compile the uECC library.

I download the library to the SDK folder.

I  start building uECC.

Copy the public_key in IAR.

Build the bootloader.

Step C.

generate bootloader setting.

mergehex


zip file



watch the video here 

What do I do wrong? 

[Alex_Golubev]

How do start work DFU? I use function ble_dfu_buttonless_bootloader_start_finalize(); but she not started DFU. 

[Hung Bui]

Hi Alex, 

Have you tried and have an overview of how the ble_app_buttonless_dfu works ? 

Like what is the main purpose of the buttonless service ? When would the buttonless service execute a reset to switch to bootloader, how to trigger that  ? 

The documentation is a little bit vague about this but it's something you need to study and understand before porting it to you application. 

I attached here the example I made to integrate dfu buttonless into ble uart. It's only KEIL support for now, but you can follow the exact project setting and the same main.c should works for you. It's for SDK v15.0 (most likely also works on 15.2)

ble_app_uart - Buttonless.zip

[Alex_Golubev]

I get error.

Function sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL) return error 8. 

[Hung Bui]

Hi,

Error code 8 meant invalid state. I'm not sure why you received that error. 

Have you tried to test with the ble_app_buttonless with no modification ? Have you got an overview of how it work ? 

[Alex_Golubev]

Hi.

Yes I have overview of how it work. See video.

I got error in function:

static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    uint32_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected");
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected");
            // LED indication will be changed when advertising starts.
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
            break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
            // No system attributes have been stored.
            err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

In line 

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
            APP_ERROR_CHECK(err_code);
            break;

It may be error in ROM? 

[Alex_Golubev]

Hung Bui do you help me?

[Hung Bui]

Hi Alex, 
The sd_ble_gap_sec_params_reply() would not be related to the buttonless DFU. I'm not so sure the err_code is actually 8 in your case. Could you put a log and print out the err_code after the call ? 

Please try to test again without the buttonless DFU code added. 

Please add stuff one at a time, having a fresh start will help you. Please refer to the main.c I have in the project I sent you. 

I would suggest to test the buttonless without bonding first. Try to combine ble_app_uart with buttonless first . Please reuse the project I sent you (main.c and sdk_config.h)

Please be aware that when you add buttonless service into your project you need to increase NRF_SDH_BLE_VS_UUID_COUNT by 1. I assume you already have done this. 

When you do bonding (so that bond information has to be forwarded to bootloader) you would need to generate the bootloader setting before testing. Please have a look at appendix 4 here.

But I strongly suggest to test without using bonding (make sure you erase bonding on the phone) and make sure it works first before you test with bonding. 

By default ble_app_uart doesn't require bonding.  

[Alex_Golubev]

Hi.

I attached a  video with the event log.