Hi I'm facing problem while programming my custom nrf52832 board (It might be issue with flash/ROM setting) its saying this hex file has a data in softdevice region . I'm using SDK_14.2.0 with SES and trying to upload blinky example with SoftDevice132.
Here is my SES settingFLASH_PH_START=0x0FLASH_PH_SIZE=0x80000RAM_PH_START=0x20000000RAM_PH_SIZE=0x10000FLASH_START=0x23000FLASH_SIZE=0x5d000RAM_START=0x20002180RAM_SIZE=0xde80
Normal example is working file but with softdevice I'm having this issue. Please try to help me out.
Kapil Rawat said:its saying this hex file has a data in softdevice region
It also gives you a suggestion on what to try - have you done that?
Kapil Rawat said:Normal example
What do you mean by that?
Having a SoftDevice is pretty much "Normal" for anything to run on an nRF5 chip!
Kapil Rawat said:with softdevice I'm having this issue
Do unmodified Nordic examples with SoftDevice work?
This is all internal to the chip - so the board should be irrelevant.
Check your project settings against a Nordic example.
See also this blog post - currently linked from the DevZone front page:
- No it's not giving any suggestion see attached picture
- Blinky example without softdevice is working fine that's why I'm guessing it is a problem of flash and RAM
- No unmodified nordic example is not working.
Even I changed flash and ROM setting as mentioned in above link but nothing changed.FLASH_START=0x23000
Again, This is all internal to the chip - so the board should be irrelevant.
Have you got an unmodified Nordic example to work on a Nordic DK?
That should be your starting point ...
Kapil Rawat said:No it's not giving any suggestion
Yes it is - in your original screenshot:
Yes Same example is working fine in Nordic 52DK board but my IC version is different (52Dk has nrf52832QFAAE0 but I'm using nrf52832QFAAB0)