I am converting the simple_on_off vendor model to send a message on mesh 3.1.
the server implemented the simple_on_off model successfully. But but my client runs into 0>, app_error_weak.c, 119, Mesh error 8 at 0x00000000 (:0) straight away.
I suspect the line below in mesh_init could be causing the problem
.core.p_uuid = dev_uuid,
NOTE: This is for the PCA10059 not the DK. LEDS and Buttons have been remapped. I have removed generic_on_off model .c and . h files. I have kept model_common.c
/* Copyright (c) 2010 - 2018, Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdint.h>
#include <string.h>
/* HAL */
#include "boards.h"
#include "simple_hal.h"
#include "app_timer.h"
/* Core */
#include "nrf_mesh_config_core.h"
#include "nrf_mesh_gatt.h"
#include "nrf_mesh_configure.h"
#include "nrf_mesh.h"
#include "mesh_stack.h"
#include "device_state_manager.h"
#include "access_config.h"
/* Provisioning and configuration */
#include "mesh_provisionee.h"
#include "mesh_app_utils.h"
/* Models */
//#include "generic_onoff_client.h"
#include "simple_on_off_client.h"
#include "simple_on_off_common.h"
/* Logging and RTT */
#include "log.h"
#include "rtt_input.h"
/* Example specific includes */
#include "app_config.h"
#include "nrf_mesh_config_examples.h"
#include "light_switch_example_common.h"
#include "example_common.h"
#include "ble_softdevice_support.h"
#define RTT_INPUT_POLL_PERIOD_MS (100)
#define GROUP_MSG_REPEAT_COUNT (2)
#define LED_BLINK_INTERVAL_MS (200)
#define LED_BLINK_SHORT_INTERVAL_MS (50)
#define LED_BLINK_CNT_START (2)
#define LED_BLINK_CNT_RESET (3)
#define LED_BLINK_CNT_PROV (4)
#define LED_BLINK_CNT_NO_REPLY (6)
static simple_on_off_client_t m_clients[CLIENT_MODEL_INSTANCE_COUNT];
//static const uint8_t m_client_node_uuid[NRF_MESH_UUID_SIZE] = CLIENT_NODE_UUID;
static bool m_device_provisioned;
static void client_status_cb(const simple_on_off_client_t *p_self, simple_on_off_status_t status, uint16_t src);
static bool client_publication_configured(void) {
dsm_handle_t pub_addr_handle;
for (uint8_t i = 0; i < CLIENT_MODEL_INSTANCE_COUNT; i++) {
if (access_model_publish_address_get(m_clients[i].model_handle, &pub_addr_handle) == NRF_SUCCESS) {
if (pub_addr_handle == DSM_HANDLE_INVALID) {
return false;
}
} else {
return false;
}
}
return true;
}
static void provisioning_complete_cb(void) {
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Successfully provisioned\n");
dsm_local_unicast_address_t node_address;
dsm_local_unicast_addresses_get(&node_address);
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Node Address: 0x%04x \n", node_address.address_start);
hal_led_mask_set(LEDS_MASK, LED_MASK_STATE_OFF);
hal_led_blink_ms(LEDS_MASK, LED_BLINK_INTERVAL_MS, LED_BLINK_CNT_PROV);
}
static uint32_t server_index_get(const simple_on_off_client_t *p_client) {
uint32_t index = p_client - &m_clients[0];
NRF_MESH_ASSERT(index < SERVER_NODE_COUNT);
return index;
}
static void client_publish_timeout_cb(access_model_handle_t handle, void *p_self) {
__LOG(LOG_SRC_APP, LOG_LEVEL_ERROR, "Acknowledged send timedout\n");
}
static void client_status_cb(const simple_on_off_client_t *p_self, simple_on_off_status_t status, uint16_t src) {
uint32_t server_index = server_index_get(p_self);
//__LOG(LOG_SRC_APP, LOG_LEVEL_ERROR, "server status received \n",p_self);
switch (status) {
case SIMPLE_ON_OFF_STATUS_ON:
hal_led_pin_set(BSP_LED_0 + server_index, true);
break;
case SIMPLE_ON_OFF_STATUS_OFF:
hal_led_pin_set(BSP_LED_0 + server_index, false);
break;
case SIMPLE_ON_OFF_STATUS_ERROR_NO_REPLY:
hal_led_blink_ms(LEDS_MASK, LED_BLINK_SHORT_INTERVAL_MS, LED_BLINK_CNT_NO_REPLY);
break;
case SIMPLE_ON_OFF_STATUS_CANCELLED:
default:
__LOG(LOG_SRC_APP, LOG_LEVEL_ERROR, "Unknown status \n");
break;
}
}
static void node_reset(void) {
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "----- Node reset -----\n");
hal_led_blink_ms(LEDS_MASK, LED_BLINK_INTERVAL_MS, LED_BLINK_CNT_RESET);
mesh_stack_device_reset();
}
static void config_server_evt_cb(const config_server_evt_t *p_evt) {
if (p_evt->type == CONFIG_SERVER_EVT_NODE_RESET) {
node_reset();
}
}
static void button_event_handler(uint32_t button_number) {
//__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Button %u pressed\n", button_number);
if (client_publication_configured()) {
uint32_t status = NRF_SUCCESS;
switch (button_number) {
case 0:
case 1:
/* send unicast message, with inverted GPIO pin value */
status = simple_on_off_client_set(&m_clients[button_number],
!hal_led_pin_get(BSP_LED_0 + button_number));
break;
case 2:
case 3:
/* send a group message to the ODD group, with inverted GPIO pin value */
status = simple_on_off_client_set_unreliable(&m_clients[button_number],
!hal_led_pin_get(BSP_LED_0 + button_number),
GROUP_MSG_REPEAT_COUNT);
hal_led_pin_set(BSP_LED_0 + button_number, !hal_led_pin_get(BSP_LED_0 + button_number));
break;
default:
break;
}
if (status == NRF_ERROR_INVALID_STATE ||status == NRF_ERROR_NO_MEM ||status == NRF_ERROR_BUSY) {
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Cannot send. Device is busy.\n");
hal_led_blink_ms(LEDS_MASK, LED_BLINK_SHORT_INTERVAL_MS, LED_BLINK_CNT_NO_REPLY);
} else {
ERROR_CHECK(status);
}
} else {
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Ignored. Node is not configured.\n");
}
}
/*uint32_t send_command_client(simple_on_off_client_t *p_client, uint8_t *msg, uint16_t length) {
//int i;
send_command_msg_t command_msg;
command_msg.length = length;
strncpy(command_msg.command, msg, length);
access_message_tx_t message;
message.opcode.opcode = SEND_COMMAND;
message.opcode.company_id = ACCESS_COMPANY_ID_NORDIC;
message.p_buffer = (const uint8_t *)&command_msg;
message.length = command_msg.length + 2;
uint32_t status = NRF_SUCCESS;
status = access_model_publish(p_client->model_handle, &message);
Method for sending to all nodes!
for (uint8_t i = 0; i < 3; ++i)
{
status = access_model_publish(p_client->model_handle, &message);
if (status == NRF_SUCCESS) {
break;
}
}
return status;
}*/
static void rtt_input_handler(int key)
{
if (key >= '0' && key <= '3')
{
uint32_t button_number = key - '0';
button_event_handler(button_number);
}
}
static void models_init_cb(void) {
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "Initializing and adding models\n");
for (uint32_t i = 0; i < CLIENT_MODEL_INSTANCE_COUNT; ++i) {
m_clients[i].status_cb = client_status_cb;
m_clients[i].timeout_cb = client_publish_timeout_cb;
ERROR_CHECK(simple_on_off_client_init(&m_clients[i], i + 1));
ERROR_CHECK(access_model_subscription_list_alloc(m_clients[i].model_handle));
}
}
static void mesh_init(void) {
uint8_t dev_uuid[NRF_MESH_UUID_SIZE];
uint8_t node_uuid_prefix[NODE_UUID_PREFIX_LEN] = CLIENT_NODE_UUID_PREFIX;
mesh_stack_init_params_t init_params =
{
.core.irq_priority = NRF_MESH_IRQ_PRIORITY_LOWEST,
.core.lfclksrc = DEV_BOARD_LF_CLK_CFG,
.core.p_uuid = dev_uuid,
.models.models_init_cb = models_init_cb,
.models.config_server_cb = config_server_evt_cb};
ERROR_CHECK(mesh_stack_init(&init_params, &m_device_provisioned));
}
static void initialize(void) {
__LOG_INIT(LOG_SRC_APP | LOG_SRC_ACCESS, LOG_LEVEL_INFO, LOG_CALLBACK_DEFAULT);
__LOG(LOG_SRC_APP, LOG_LEVEL_INFO, "----- BLE Mesh Light Switch Client Demo -----\n");
hal_leds_init();
#if BUTTON_BOARD
ERROR_CHECK(hal_buttons_init(button_event_handler));
#endif
nrf_clock_lf_cfg_t lfc_cfg = DEV_BOARD_LF_CLK_CFG;
mesh_init();
}
static void start(void) {
rtt_input_enable(rtt_input_handler, RTT_INPUT_POLL_PERIOD_MS);
ERROR_CHECK(mesh_stack_start());
if (!m_device_provisioned) {
static const uint8_t static_auth_data[NRF_MESH_KEY_SIZE] = STATIC_AUTH_DATA;
mesh_provisionee_start_params_t prov_start_params =
{
.p_static_data = static_auth_data,
.prov_complete_cb = provisioning_complete_cb};
ERROR_CHECK(mesh_provisionee_prov_start(&prov_start_params));
}
const uint8_t *p_uuid = nrf_mesh_configure_device_uuid_get();
__LOG_XB(LOG_SRC_APP, LOG_LEVEL_INFO, "Device UUID ", p_uuid, NRF_MESH_UUID_SIZE);
hal_led_mask_set(LEDS_MASK, LED_MASK_STATE_OFF);
hal_led_blink_ms(LEDS_MASK, LED_BLINK_INTERVAL_MS, LED_BLINK_CNT_START);
}
int main(void) {
bsp_board_init(BSP_INIT_LEDS); // leds fro pca10059
initialize();
start();
for (;;) {
(void)sd_app_evt_wait();
}
}
If someone could shed some light as to why im getting error 8
thanks in advance
