Two issues with CC310 HW CryptoCell: Linking and hanging

[jakkra]

Hi, we stumbled into two issues when we enabled LESC in our application.

Relevant SDK config:

NRF_CRYPTO_ENABLED

NRF_CRYPTO_BACKEND_CC310_ENABLED

NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED

First one is that pm_init() will hang if called when NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED unless we call sd_nvic_critical_region_enter before and then sd_nvic_critical_region_exit after. I can't find anything documentation saying that we need to do that. See attached stacktrace when calling pm_init() without entering critical region. It's the CRYS_RndInit() which hangs and causes the WD to reset.

Second issue I think is related to linking. 

I have a theory that the linker does not link cc310_backend_init.o file as the two public functions void cc310_backend_enable(void); and void cc310_backend_disable(void); are
found in cc310_backend_shared.c and therefore CRYPTO_BACKEND_REGISTER does not
place cc310_backend_init and cc310_backend_uninit in the crypto_data section in flash.

Causing that cc310_backend_init() is never called when initiating as it's not found in the.crypto_data 

If I add a dummy function to cc310_backend_init.c the two functions are placed in the .crypto_data section in the flash. See the attached patch.txt file.

Fullscreen patch.txt Download

diff --git a/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/backend/cc310/cc310_backend_init.c b/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/backend/cc310/cc310_backend_init.c
index e3e77f0b..05f29edb 100644
--- a/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/backend/cc310/cc310_backend_init.c
+++ b/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/backend/cc310/cc310_backend_init.c
@@ -57,6 +57,18 @@ void cc310_backend_enable(void);
  */
 void cc310_backend_disable(void);
 
+// patch start
+uint32_t forceLinkingcc310BackendInit()
+{
+    /*
+    The linker does not link this file as the above two functions are found in cc310_backend_shared.c
+    And therefore CRYPTO_BACKEND_REGISTER does not place cc310_backend_init cc310_backend_uninit 
+    in the crypto_data section in flash. This is a workaround for not ignoring this file.
+    */
+    return 0;
+}
+//patch end
+
 static uint32_t init_result_get(uint32_t crys_error)
 {
     uint32_t ret_val = NRF_ERROR_INTERNAL;
     
--- a/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.c
+++ b/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.c
@@ -79,6 +79,11 @@ ret_code_t nrf_crypto_init(void)
             return ret_val;
         }
     }
+    // patch start
+#if NRF_MODULE_ENABLED(NRF_CRYPTO_BACKEND_CC310)
+    forceLinkingcc310BackendInit();
+#endif
+    // patch end
 
     // Set nrf_crypto to initialized
     m_state = INITIALIZED;
diff --git a/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.h b/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.h
index 8e10ae13..a90125b0 100644
--- a/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.h
+++ b/bsp/nRF5_SDK_15.2.0_9412b96/components/libraries/crypto/nrf_crypto_init.h
@@ -136,6 +136,10 @@ bool nrf_crypto_is_initialized(void);
  */
 bool nrf_crypto_is_initializing(void);
 
+// patch start
+uint32_t forceLinkingcc310BackendInit();
+// patch end
+
 #ifdef __cplusplus
 }
 #endif

SoftDevice: s140_nrf52_6.1.0

SDK: nRF5_SDK_15.2.0_9412b96

[Einar Thorsrud]

Hi,

1. I do not recall seeing this issue before, nor do I immediately understand what is going on. You cannot use CC310 concurrently, and therefore the backed wrapper (cc310_backend_rng.c) use the CC310 mutex. I do not see any reason for using critical sections, though. Therefore, I have a few questions just to understand more about the situation:

• How do you handle memory for the RNG module?
• Is NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED set to 1 in the projects sdk_config.h?
• Since using critical sections seem to help - what do you expect is interrupting when initializing the RNG?
• Can you provide an example project that demonstrate this?

2. This is also new to me, so I have a few questions here as well:

• Which toolchain do you use?
• Does it depend on optimization level or other settings?
• Can you provide an example project that demonstrate this?

[jakkra]

Hi, thanks for looking into this:

1.

- NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED 1. I did also try with dynamic but did not make a difference. I have also tested with and without NRF_CRYPTO_RNG_AUTO_INIT_ENABLED 1.

- I managed to find what code makes CRYS_RndInit() hang. Anything obvious you can spot here which causes it? This is part of our initiation.

NVIC_SetPriority(DebugMonitor_IRQn, 7ul);

// IRQ configuration
sd_nvic_SetPriority(RTC2_IRQn, APP_IRQ_PRIORITY_LOW);
sd_nvic_ClearPendingIRQ(RTC2_IRQn);
sd_nvic_EnableIRQ(RTC2_IRQn);

// Start LFCLK clock
nrf_clock_task_trigger(NRF_CLOCK_TASK_LFCLKSTART);

// Configure RTC2 frequency
nrf_rtc_prescaler_set(NRF_RTC2, cbHW_PRESCALER_RTC2);

/* Disable interrupts and events before changing configuration. */
sd_nvic_DisableIRQ(RTC2_IRQn);
sd_nvic_ClearPendingIRQ(RTC2_IRQn);

nrf_rtc_task_trigger(NRF_RTC2, NRF_RTC_TASK_STOP);
nrf_rtc_int_disable(NRF_RTC2, NRF_RTC_INT_COMPARE0_MASK);
nrf_rtc_int_disable(NRF_RTC2, NRF_RTC_INT_TICK_MASK);
nrf_rtc_event_disable(NRF_RTC2, NRF_RTC_INT_COMPARE0_MASK);
nrf_rtc_event_disable(NRF_RTC2, NRF_RTC_INT_TICK_MASK);
sysTickMode = mode;

sd_nvic_ClearPendingIRQ(RTC2_IRQn);
sd_nvic_EnableIRQ(RTC2_IRQn);

nrf_rtc_event_enable(NRF_RTC2, NRF_RTC_INT_TICK_MASK);
nrf_rtc_int_enable(NRF_RTC2, NRF_RTC_INT_TICK_MASK);
nrf_rtc_task_trigger(NRF_RTC2, NRF_RTC_TASK_START);
break;

flowControl = NRF_POWER->GPREGRET >> 3;

NRF_POWER->GPREGRET = 0;

2. Don't have at the moment, but the code above should hopefully reproduce it.

- arm-eabi-gcc.exe (GCC) 6.2.0, GNU ar (GNU Binutils) 2.27. more exact: http://gnutoolchains.com/arm-eabi/ arm-eabi-gcc6.2.0-r4

- Same issue when we build with zero optimization. Problem is that in nrf_crypto_init NRF_CRYPTO_BACKEND_SECTION_ITEM_COUNT is 0 without the patch I showed in the issue.

- I might be able to create an example project some day, but first I think this issue should be tested with the same toolchain we use. I'll also try with the latest arm-eabi-gcc and see if it solves the problem.

[Einar Thorsrud]

Hi,

I am sorry for the late reply (I have been away for some days). This seems like a linker issue of some sort, but I don't know. I have not had a chance to try to reproduce this yet but will do that early next week. Please let me know if you have any new findings. In any case I will get back to you early next week.

[jakkra]

Hi, no problem. The workaround is fine for us right now, but it would be good if we could get rid of it in upcoming SDK releases. I did try with arm-eabi-gcc7.2.0-r3, but it did not compile our application, possibly some build settings need to be changed/updated, as I got some compile issues and didn't have time digging deeper into it.

[Einar Thorsrud]

Hi,

I did not notice earlier, but why do you use arm-eabi instead of arm-none-eabi? We only test with arm-none-eabi.