Hi, I just finished prototype using nrf51822. I programmed my part while it's mounted on my PCB.
I am preparing for mass production. So I need to program the parts quickly before I mount the part. I bought a standalone socket for the part, How can I get a connector to connect my socket to the PC to program my part?
THanks.
John
Usually, it is done in-situ on the board as part of testing.
Your board manufacturer (or assembler, if different) should understand this.
Discuss with your chip supplier about having them preprogrammed.
3rd parties exist who will program chips and re-reel them for the assembly house. Again, talk to your supplier, and your assembly house for suggestions/recommendations.
Doing it manually in a socket is not a practical proposition!!
Usually, it is done in-situ on the board as part of testing.
Your board manufacturer (or assembler, if different) should understand this.
Discuss with your chip supplier about having them preprogrammed.
3rd parties exist who will program chips and re-reel them for the assembly house. Again, talk to your supplier, and your assembly house for suggestions/recommendations.
Doing it manually in a socket is not a practical proposition!!
