• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 2408 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104528
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

nRF51 Dongle programming

microchip

Hi,

I want to use the nRF51 dongle with the Master Control Panel. I found in the nRF51 Dongle User Guide that the Dongle will run with the Master Emulator firmware, but not how to programm the dongle.

Is there a manual available?

Parents
  • 0

    With Vidar's answer you are able to program anything you want, but for convinience when you just want to use Master Emulator Firmware with the dongle you can do this:

    1. Open Master Control Panel
    2. Choose your dongle from the "Master Emulator" drop down list at the top left
    3. File->Flash Programming
    4. Choose e.g 0.10 MEFW.
Reply
  • 0

    With Vidar's answer you are able to program anything you want, but for convinience when you just want to use Master Emulator Firmware with the dongle you can do this:

    1. Open Master Control Panel
    2. Choose your dongle from the "Master Emulator" drop down list at the top left
    3. File->Flash Programming
    4. Choose e.g 0.10 MEFW.
Children
No Data
Related