Trying to up load mqtt_simple sample, however getting bus fault on terminal. have browsed after the same issue here, but don't work after doing git pull ect...
here's the output:
***** BUS FAULT *****
Precise data bus error
BFAR Address: 0x4002a514
***** Hardware exception *****
Current thread ID = 0x2000033c
Faulting instruction address = 0x70b8
Fatal fault in essential thread! Spinning...
Hello Henning, Did you see this thread? Similar bus fault with the MQTT Simple Sample.Kind regards,Øyvind
Yess, gjorde alt på vei ned til ninja flash. fikk dette ut på terminalen:
C:\gnuarmemb\bin\arm-none-eabi-objcopy.exe: zephyr.hex 64-bit address 0x4b4fa300000000 out of range for Intel Hex fileC:\gnuarmemb\bin\arm-none-eabi-objcopy.exe:zephyr.hex: bad valueninja: build stopped: subcommand failed
This is a known bug with the latest version of GNU Embedded Toolchain for Arm, see this thread. Please download and install the previous version:https://developer.arm.com/tools-and-software/open-source-software/gnu-toolchain/gnu-rm/downloads#panel2a
I've done everything on that first thread and second thread. have done this as well:
The following repositories must be combined with fw-nrfconnect-nrf:
and trying to opden ned sdk project in segger and configurate new directory etc.
and getting this error.
and after this error I deleted the fw-nrfconnect-nrf repositories and clone other older repositories, it works like a clock, but to run mqtt_simple I must have the new ones. but the new ones give me project file error on every sample.
Yes, this error is due to an issue with the master branch and Segger, as mentioned here. This is an issue that we are working to solve. If you are comfortable with command line programming, then I suggest following the linked thread. But you have to use command promt or terminal.If you do want to use Segger, then you have to stick with the working GIT repo (tag v0.3.0), which does not have the MQTT Simple example. The workaround would be to copy this MQTT Simple Sample (just the MQTT Simple folder) into your samples folder: nrf\samples\nrf9160\Using Segger, you should be able to open this example using "Open RF Connect SDK project" as normal.Have a try and see how that works.Kind regards,Øyvind