GPS+HTTP POST

[Hoang]

Dear , 

I tried to use HTTP POST to POST the information from GPS to my webserver. 

But I couldn't combine 2 of them together. ( they, GPS and HTTP POST, worked well separately). 

Could you please help me. 

1. GPS: (works)

gps.7z

2. LTE HTTP POST (works)

LTE_Debug.7z

3. GPS+LTE HTTP POST: ( DOES NOT WORK)

GPS_LTE_debug.7z

Peripheral		Domain		Status
00 NRF_P0		Non-Secure	OK
01 NRF_CLOCK		Non-Secure	OK
02 NRF_RTC1		Non-Secure	OK
03 NRF_NVMC		Non-Secure	OK
04 NRF_UARTE1		Non-Secure	OK
05 NRF_UARTE2		Secure		SKIP
06 NRF_IPC		Non-Secure	OK
07 NRF_VMC		Non-Secure	OK
08 NRF_FPU		Non-Secure	OK
09 NRF_EGU1		Non-Secure	OK
10 NRF_EGU2		Non-Secure	OK
11 NRF_TWIM2		Non-Secure	OK
12 NRF_SPIM3		Non-Secure	OK
13 NRF_TIMER0		Non-Secure	OK
14 NRF_TIMER1		Non-Secure	OK
15 NRF_TIMER2		Non-Secure	OK
16 NRF_SAADC		Non-Secure	OK
17 NRF_GPIOTE1		Non-Secure	OK

SPM: NS image at 0x8000
SPM: NS MSP at 0x20023ab8
SPM: NS reset vector at 0xf9e5
SPM: prepare to jump to Non-Secure image.
***** Booting Zephyr OS v1.14.99-ncs1 *****
Test is starting 
Staring GPS application
Failed to enable GPS

I couldnt enable GPS when I set: 

# LTE link control
CONFIG_LTE_LINK_CONTROL=y

in prj.conf file. 

Plz help me. 

Thanks so much 

Regards, 

Hng

I am using: 

ncs_ version:

 v0.4.0 

SES 4.16 

firmware: mfwnrf916007029alpha

Hardware: nRF9160 DK v: 0.8.5

[Håkon Alseth]

Hi,

 

The current modem firmware, v0.7.0-29-alpha, allows you to choose the system mode via command %XSYSTEMMODE, but it does not support them concurrently, meaning that you cannot have GPS + NB-IoT, or GPS + CAT M1, enabled simultaneously at this time.

 

Kind regards,

Håkon

[Hoang]

Dear Håkon Alseth

Thanks so much

disappointed . do you know when can we use GPS + NB-IoT, or GPS + CAT M1?

Thanks, 

Regards, 

hng

[Håkon Alseth]

It looks like you are disabling the modem, then enabling NB-IoT, as per the specification for XSYSTEMMODE:

Only one supported mode allowed at a time. Use this command before activating the
modem using the CFUN=1 command. If the mode needs to be changed, deactivate the modem
first using the CFUN=4 command.

 

Have you checked if you have NB-IoT coverage in your area?

Are you able to successfully get a connection with at_client using NB-IoT?

 

Kind regards,

Håkon

[Hoang]

Dear Håkon Alseth

I am using iBASIS sim card, my location i Horten, Vestfold, Norway

And  I tried with at_client:

AT+CFUN?
+CFUN: 1
OK
AT+CGSN=1
+CGSN: "352656100266454"
OK
AT+CGMI
Nordic Semiconductor ASA
OK
AT+CGMM
nRF9160-SICA
OK
AT+CGMR
mfw_nrf9160_0.7.0-29.alpha
OK
AT+CEMODE?
+CEMODE: 0
OK
AT%XCBAND=?
%XCBAND: (1,2,3,4,5,8,12,13,17,20,25,26,28,66)
OK
AT+CMEE?
+CMEE: 1
OK
AT+CNEC?
+CNEC: 24
OK
AT+CGEREP?
+CGEREP: 1,0
OK
AT+CIND=1,1,1
OK
AT+CEREG=2
OK
AT+CEREG?
+CEREG: 2,4,"FFFE","FFFFFFFF",9
OK
AT%CESQ=1
OK
AT+CESQ
+CESQ: 99,99,255,255,255,255
OK
AT%XSIM=1
OK
AT%XSIM?
%XSIM: 1
OK
AT+CPIN?
+CPIN: READY
OK
AT+CPINR="SIM PIN"
+CPINR: "SIM PIN",3
OK
AT+CIMI
204080813512530
OK
%CESQ: 74,3
+CEREG: 2,"9D6D","0110C367",9
+CNEC_ESM: 111,0
+CNEC_EMM: 19
AT+CFUN=1
OK
AT%XSYSTEMMODE?
%XSYSTEMMODE: 0,1,0,0
OK
AT+COPS=?

and AT+COPS=? /At+COPS?

AT+COPS=?
+COPS: (1,"","","24201",9),(1,"","","24202",9)
OK
%CESQ: 69,3
AT+COPS?
+COPS: 0
OK

It took for about 4mn to respond this info, 

Thanks, 

Regards,

hng

[Håkon Alseth]

Hi Hng,

 

It's a bit unclear for me, do you get nb-iot connectivity in at_client?

 

COPS will do a search, and return the operators in your area.

24201 holds two things, country code and operator.

242 = Norway, 01 = Telenor.

02 = Telia.

 

Using the iBasis SIM, you can choose the network. If you want to check with Telia, this is the command:

AT+COPS=1,2,"24202"

 

Kind regards,

Håkon

[Hoang]

Dear Håkon Alseth

Thanks for your support, 

I was confusing about nb-iot connectivity in at_client also, so I tried to show you the report, i hope you can help

When I tried to enable nb-iot:  %XSYSTEMMODE: 0,1,0,0

and I check the network: 

AT+COPS?

+COPS:0

AT+COPS=?

+COPS: (1,"","","24201",9),(1,"","","24202",9)

OK


I see: NB-IoT is connected, but 

LTE & PDN 
and 
Show serving station location: NOt availbe 

Is it correct?

Thanks,

Regards,
hng

[fabocode]

Did you finally found how to send GPS data to your host over the http post? I'm trying to achieve the same thing, however...

I'm starting to test this with a Thingy:91 so I was looking for some example here to test it