BLE_NUS change UART baudrate at runtime

[gnrboy]

Can you please help i use ble _ nus and after few message i need to change uart baudrate. I cloes uart then init uart with new baudrate parameter but everytime MCU goes to in error handler function. Where will be best to put  new uart initialization. I know that after i send via bluetooth to nrf52840 0x06 0x39 0x36 0x30 0x30 and nrf52840 forward this message on tx  in next 200 ms device connected to nrf52840s uart will respond on new baudrate which i have send that it changes.

[awneil]

So what debugging have you done to determine when / where it gets sent to the error handler ?

As always, I would strongly recommend that you start simple - so make sure that you can get this runtime change working without BLE  first.

Once you have that working, then move on to integrating it with BLE ...

gnrboy said:

I cloes uart then init uart with new baudrate

So one thing that will be important is to ensure that nothing tries to use any UART-related functions after you close it, but before you're successfully initialised it with the new settings ...

[gnrboy]

in nus_data_handler function i have add condition 

if (p_evt->params.rx_data.p_data[0] == 0x06 && p_evt->params.rx_data.p_data[1] == 0x39 && p_evt->params.rx_data.p_data[2] == 0x36){

//app_uart_close();

bsp_board_led_invert(3);
NRF_UART0->BAUDRATE = (UART_BAUDRATE_BAUDRATE_Baud9600 << UART_BAUDRATE_BAUDRATE_Pos);
}

if i comment "NRF_UART0->BAUDRATE = (UART_BAUDRATE_BAUDRATE_Baud9600 << UART_BAUDRATE_BAUDRATE_Pos);"

nrf52840 did not go to  NRF_BREAKPOINT_COND; in app_error_weak.c.

if i dont put all if  condition block nrf52840  go to  NRF_BREAKPOINT_COND; in app_error_weak.c.

[awneil]

so have you now fixed the crashing?

Is this now a new question?

[gnrboy]

chrashing is stil happening because now nrf change his baudrate  before it should.

it should change baudrate after 'q' 'r' 't' send over his tx pin not before. 

I send over smartphones BLE 'q' 'r' 't' (command to change baudrate) to nrf and nrf needs to send over his uart 'q' 'r' 't' and then change his baudrate to receive message from other device which is connected on his uart on new baudrate.

Now is happening that when i send over smartphones BLE 'q' 'r' 't'  to nrf. Nrf change his baudrate and sends on new baudrate 'q' 'r' 't'. 

i need that works on this order:

1. smartphone via ble send 'q' 'r' 't'

2. nrf receive from smartphone 'q' 'r' 't' and send over uart on his default baudrate 'q' 'r' t'

3. after nrf is send 'q' 'r' 't' it change baudrate on new value

4. nrf receive message from uart on new baudrate

5. send this message to smartphone via BLE

[awneil]

That would be a lot clearer with a diagram - like the Message Sequence Charts Nordic use for describing this kind of stuff; eg,

https://infocenter.nordicsemi.com/topic/com.nordic.infocenter.s130.api.v2.0.0/group___b_l_e___g_a_p___a_d_v___m_s_c.html

I'm losing track of what has & has not been proved here.

1. Without BLE, Have you demonstrated that you can change the baud rate on-the-fly, and the nRF will correctly transmit & receive at the new baud rate?
    
2. After successfully completing (1), Having then got the same with BLE ?

[gnrboy]

I NEED  WHEN TX IS DONE ( FIFO BUFFER IS EMPTY) THAT THEN CHANGE BAUDRATE.

THIS PROBLEM OCCURS IN BOTH CASES. 

Can somebody else  answer on this topic because your answers doesnt help. 

Im new in NRF world and need help to work in NRF SDK

[awneil]

gnrboy said:

Im new in NRF world

Are you familiar with software development in any other context?

You seem to lack any systematic approach to problem solving.

I'm out.

[gnrboy]

EDIT: behavioral on just uart is the sam and i will keep debugging more on this example.

I cant find some event which is says that tx is done