• State Verified Answer
  • Replies 18 replies
  • Subscribers 73 subscribers
  • Views 9289 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 105032
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Error using nRF Master Control Panel - Error (0x8)

MANGO

Hello, I'm using the nRF6310 board and tried the HID Keyboard Application (S110, ble_app_hids_keyboard) example.

The nRF51 SDK version is 6.1. I use IAR for ARM 7.1.

I downloaded the example code and tried to connect the board with the Master Control Panel app. I use LG Nexus 5 D821.

While connecting, a error message had appeared.

nRF Master Control Panel, 2015-01-07

 Nordic_Keyboard (F3:7C:22:93:EA:42)

 V 13:22:19.023 Connecting to F3:7C:22:93:EA:42...
 D 13:22:19.033 gatt = device.connectGatt(autoConnect = true)
 D 13:22:19.564 [Callback] Connection state changed with status: 0 and new state: 2 (CONNECTED)
 D 13:22:19.580 [Broadcast] Action received: android.bluetooth.device.action.ACL_CONNECTED
 I 13:22:19.666 Connected to F3:7C:22:93:EA:42
 V 13:22:20.303 Discovering Services...
 D 13:22:20.316 gatt.discoverServices()
 D 13:22:21.870 [Callback] Services discovered with status: 0
 I 13:22:21.897 Services Discovered
 V 13:22:21.949 Generic Access (0x1800)

 - Device Name [R W] (0x2A00)
 - Appearance [R] (0x2A01)
 - Peripheral Preferred Connection Parameters [R] (0x2A04)

 Generic Attribute (0x1801)
 Device Information (0x180A)
 - Manufacturer Name String [R] (0x2A29)
 - PnP ID [R] (0x2A50)

 Battery Service (0x180F)
 - Battery Level [N R] (0x2A19)
    Client Characteristic Configuration (0x2902)

 Human Interface Device (0x1812)
 - Protocol Mode [R WNR] (0x2A4E)
 - Report [N R W] (0x2A4D)
    Client Characteristic Configuration (0x2902)
    Report Reference (0x2908)
 - Report [R W WNR] (0x2A4D)
    Report Reference (0x2908)
 - Report Map [R] (0x2A4B)
 - Boot Keyboard Input Report [N R] (0x2A22)
    Client Characteristic Configuration (0x2902)
 - Boot Keyboard Output Report [R W WNR] (0x2A32)
 - HID Information [R] (0x2A4A)
 - HID Control Point [WNR] (0x2A4C)

 D 13:23:28.517 [Callback] Connection state changed with status: 8 and new state: 0 (DISCONNECTED)
 D 13:23:28.545 [Broadcast] Action received: android.bluetooth.device.action.ACL_DISCONNECTED
 E 13:23:28.571 Error (0x8): GATT INSUF AUTHORIZATION
 D 13:23:28.595 gatt.refresh()

After refreshing, it does not try to connect.

I did not change the example code. Why do I recieve the error?

E 13:23:28.571 Error (0x8): GATT INSUF AUTHORIZATION

Thank you for helping me!

custom.h

hid main.txt

Parents
  • 0

    Thank you for replying Petter. Well, I think this is not related to the SDK problem.

    The keyboard hex file you gave me pairs well with the iOS devices. Also the SDK 7.2's HID keyboard examples works well with the iOS devices as well.

    Actually the problem is that I edited the HID report to add a volume control (Consumer Report).

    I think when I try to add the consumer report and test it to my custom board, the bonding keeps fails and causes problems (regardless of the SDK version).

    I'm sorry but can you check my report map codes? I posted at this post.

Reply
  • 0

    Thank you for replying Petter. Well, I think this is not related to the SDK problem.

    The keyboard hex file you gave me pairs well with the iOS devices. Also the SDK 7.2's HID keyboard examples works well with the iOS devices as well.

    Actually the problem is that I edited the HID report to add a volume control (Consumer Report).

    I think when I try to add the consumer report and test it to my custom board, the bonding keeps fails and causes problems (regardless of the SDK version).

    I'm sorry but can you check my report map codes? I posted at this post.

Children
No Data
Related
Terms of service