Easiest way to make a Long Range Beacon with nRF52840?

[CraigE]

I've just got my hands on a nRF52840 DK and need to quickly evaluate it as a bluetooth 5 beacon in long range mode.

I assume I can just modify an example project to make this happen. If that's the case, what's the best example to start from and what sort of modification will I need to do to reconfigure it as a long range beacon?

[awneil]

CraigE said:

what's the best example to start from

Err - the one that's called, "Beacon..." ?!

https://infocenter.nordicsemi.com/topic/com.nordic.infocenter.sdk5.v15.3.0/examples_ble_peripheral.html

[CraigE]

I have found the beacon example, but it seems the default is not Long Range? I guess I was asking if there were any BT5 feature specific examples too. If not, where do the changes need to be made?

[awneil]

CraigE said:

it seems the default is not Long Range?

Indeed - normally that is exactly what you don't want from a beacon!

https://devzone.nordicsemi.com/f/nordic-q-a/50365/looking-for-products-that-use-the-nrf52840/201296#201296

A few threads on long-range beacons:

https://devzone.nordicsemi.com/search?q=beacon%20long%20range

and long-range in general:

https://devzone.nordicsemi.com/f/nordic-q-a/44867/long-range-setup-for-nrf52840/176189#176189

[CraigE]

In my case it I'd like to test this for an application.

Thanks for the threads. I've been changing some of the parameters based on what I've read.

Seems like the below parameters compile and run, but I don't know if they actually work on BT5 yet!

    m_adv_params.primary_phy     = BLE_GAP_PHY_CODED;
    m_adv_params.secondary_phy   = BLE_GAP_PHY_CODED;
    m_adv_params.scan_req_notification = 0;

    m_adv_params.properties.type = BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED;
    m_adv_params.p_peer_addr     = NULL;    // Undirected advertisement.
    m_adv_params.filter_policy   = BLE_GAP_ADV_FP_ANY;
    m_adv_params.interval        = NON_CONNECTABLE_ADV_INTERVAL;
    m_adv_params.duration        = 0;       // Never time out.

[Vidar Berg]

It should work with those parameters. You may change the output power after you have added the adv. set as well to increase the range further. The output power is 0 dBm by default. 

eg.,

err_code = sd_ble_gap_adv_set_configure(&m_adv_handle, &m_adv_data, &m_adv_params);
APP_ERROR_CHECK(err_code);

err_code = sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV, m_adv_handle, 8); //+8dBm
APP_ERROR_CHECK(err_code);

  

Also, I saw from your other post that you wanted to use a 52840 dongle for scanning. We don't have any ready-made examples for it, but you can try the hex file attached below. I based it on the usbd_ble_uart example and changed it so that it will only scan for coded PHY advertisement packets and print the address and RSSI of those packets over the USB interface. 

beacon_lr_scanner_w_s140.hex

Expected output when you connect a serial client to the vcom port

 

[CraigE]

Thank you! This is exactly the kind of tool I was looking for!