I need to measure with SAADC two channels in the same time (NRF_SAADC_INPUT_AIN6 and NRF_SAADC_INPUT_AIN4).
Is possible ?
Have you an code example?
Thanks
Marco
I need to measure with SAADC two channels in the same time (NRF_SAADC_INPUT_AIN6 and NRF_SAADC_INPUT_AIN4).
Is possible ?
Have you an code example?
Thanks
Marco
Dear, all.
I have activated the second channel:
#define NRFX_SAADC_PULSE_CHANNEL_CONFIG_SE(PIN_P) \ { \ .resistor_p = NRF_SAADC_RESISTOR_DISABLED, \ .resistor_n = NRF_SAADC_RESISTOR_DISABLED, \ .gain = NRF_SAADC_GAIN1_6, \ .reference = NRF_SAADC_REFERENCE_INTERNAL, \ .acq_time = NRF_SAADC_ACQTIME_3US, \ .mode = NRF_SAADC_MODE_SINGLE_ENDED, \ .burst = NRF_SAADC_BURST_DISABLED, \ .pin_p = (nrf_saadc_input_t)(PIN_P), \ .pin_n = NRF_SAADC_INPUT_DISABLED \ } #define NRFX_SAADC_INEX_CHANNEL_CONFIG_SE(PIN_P) \ { \ .resistor_p = NRF_SAADC_RESISTOR_DISABLED, \ .resistor_n = NRF_SAADC_RESISTOR_DISABLED, \ .gain = NRF_SAADC_GAIN1_6, \ .reference = NRF_SAADC_REFERENCE_INTERNAL, \ .acq_time = NRF_SAADC_ACQTIME_3US, \ .mode = NRF_SAADC_MODE_SINGLE_ENDED, \ .burst = NRF_SAADC_BURST_DISABLED, \ .pin_p = (nrf_saadc_input_t)(PIN_P), \ .pin_n = NRF_SAADC_INPUT_DISABLED \ } nrf_saadc_channel_config_t channel_config_INEX = NRFX_SAADC_INEX_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN6); nrf_saadc_channel_config_t channel_config_PULSE = NRFX_SAADC_PULSE_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN4); void saadc_init(unsigned char type) { ret_code_t err_code; err_code = nrf_drv_saadc_init(NULL, saadc_PULSE_INEX_callback); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(0, &channel_config_INEX); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(1, &channel_config_PULSE); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool_scann[0], SAMPLES_IN_BUFFER_SCANN); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool_scann[1], SAMPLES_IN_BUFFER_SCANN); APP_ERROR_CHECK(err_code); }
seem work but sametime in the buffer I find the values exchanged between channels. WHY ?
this is my callback function:
void saadc_PULSE_INEX_callback(nrf_drv_saadc_evt_t const * p_event) { nrf_saadc_value_t adc_result; uint16_t value_mV_local; uint16_t value_mV_acc; int i; if (p_event->type == NRF_DRV_SAADC_EVT_DONE) { ret_code_t err_code; err_code = nrf_drv_saadc_buffer_convert(p_event->data.done.p_buffer, SAMPLES_IN_BUFFER_SCANN); APP_ERROR_CHECK(err_code); adc_result = p_event->data.done.p_buffer[0]; adc_value_inex = ADC_RESULT_IN_MILLI_VOLTS(adc_result);//+ DIODE_FWD_VOLT_DROP_MILLIVOLTS; adc_result = p_event->data.done.p_buffer[1]; adc_value_pulse = ADC_RESULT_IN_MILLI_VOLTS(adc_result);//+ DIODE_FWD_VOLT_DROP_MILLIVOLTS; } }
with this code I ask a start of new conversion
nrf_drv_saadc_sample();
while(!u_STATO10.STATO10_bit.mm_EOC);
the bit mm_EOC is for waiting the end of conversion. This is set in the callback with the event DONE.
Marco
I had forgotten to say:
#define SAMPLES_IN_BUFFER_SCANN 2
static nrf_saadc_value_t m_buffer_pool_scann[2][SAMPLES_IN_BUFFER_SCANN];
Marco
I had forgotten to say:
#define SAMPLES_IN_BUFFER_SCANN 2
static nrf_saadc_value_t m_buffer_pool_scann[2][SAMPLES_IN_BUFFER_SCANN];
Marco
Yes. The buffer isn't aware of how many channels you use, so you should set the buffer equal to N * number of channels, N=0,1,2,3,... in order to always have the same channel on the same place in your buffer.
Then ? how to set it ?. I don't understand.
static nrf_saadc_value_t m_buffer_pool_scann[2][2]; This is NOT correct ?
I use 2 channels. Could you tell me how ?
Sorry. I meant the SAMPLES_IN_BUFFER define should be N * the numbers of channels you use.
I don't know what chip or SDK version you use, but this is written in SDK15.3.0, and tested with nRF52832:
/** * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * @defgroup nrf_adc_example main.c * @{ * @ingroup nrf_adc_example * @brief ADC Example Application main file. * * This file contains the source code for a sample application using ADC. * * @image html example_board_setup_a.jpg "Use board setup A for this example." */ #include <stdbool.h> #include <stdint.h> #include <stdio.h> #include <string.h> #include "nrf.h" #include "nrf_drv_saadc.h" #include "nrf_drv_ppi.h" #include "nrf_drv_timer.h" #include "boards.h" #include "app_error.h" #include "nrf_delay.h" #include "app_util_platform.h" #include "nrf_pwr_mgmt.h" #include "nrf_log.h" #include "nrf_log_ctrl.h" #include "nrf_log_default_backends.h" #define SAMPLES_IN_BUFFER 2 volatile uint8_t state = 1; static const nrf_drv_timer_t m_timer = NRF_DRV_TIMER_INSTANCE(0); static nrf_saadc_value_t m_buffer_pool[2][SAMPLES_IN_BUFFER]; static nrf_ppi_channel_t m_ppi_channel; static uint32_t m_adc_evt_counter; void timer_handler(nrf_timer_event_t event_type, void * p_context) { } void saadc_sampling_event_init(void) { ret_code_t err_code; err_code = nrf_drv_ppi_init(); APP_ERROR_CHECK(err_code); nrf_drv_timer_config_t timer_cfg = NRF_DRV_TIMER_DEFAULT_CONFIG; timer_cfg.bit_width = NRF_TIMER_BIT_WIDTH_32; err_code = nrf_drv_timer_init(&m_timer, &timer_cfg, timer_handler); APP_ERROR_CHECK(err_code); /* setup m_timer for compare event every 400ms */ uint32_t ticks = nrf_drv_timer_ms_to_ticks(&m_timer, 400); nrf_drv_timer_extended_compare(&m_timer, NRF_TIMER_CC_CHANNEL0, ticks, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false); nrf_drv_timer_enable(&m_timer); uint32_t timer_compare_event_addr = nrf_drv_timer_compare_event_address_get(&m_timer, NRF_TIMER_CC_CHANNEL0); uint32_t saadc_sample_task_addr = nrf_drv_saadc_sample_task_get(); /* setup ppi channel so that timer compare event is triggering sample task in SAADC */ err_code = nrf_drv_ppi_channel_alloc(&m_ppi_channel); APP_ERROR_CHECK(err_code); err_code = nrf_drv_ppi_channel_assign(m_ppi_channel, timer_compare_event_addr, saadc_sample_task_addr); APP_ERROR_CHECK(err_code); } void saadc_sampling_event_enable(void) { ret_code_t err_code = nrf_drv_ppi_channel_enable(m_ppi_channel); APP_ERROR_CHECK(err_code); } void saadc_callback(nrf_drv_saadc_evt_t const * p_event) { if (p_event->type == NRF_DRV_SAADC_EVT_DONE) { ret_code_t err_code; err_code = nrf_drv_saadc_buffer_convert(p_event->data.done.p_buffer, SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); int i; NRF_LOG_INFO("ADC event number: %d", (int)m_adc_evt_counter); for (i = 0; i < SAMPLES_IN_BUFFER; i++) { NRF_LOG_INFO("%d", p_event->data.done.p_buffer[i]); } m_adc_evt_counter++; } } void saadc_init(void) { ret_code_t err_code; nrf_saadc_channel_config_t channel_config0 = NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN0); nrf_saadc_channel_config_t channel_config1 = NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN1); err_code = nrf_drv_saadc_init(NULL, saadc_callback); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(0, &channel_config0); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(1, &channel_config1); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool[0], SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool[1], SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); } /** * @brief Function for main application entry. */ int main(void) { uint32_t err_code = NRF_LOG_INIT(NULL); APP_ERROR_CHECK(err_code); NRF_LOG_DEFAULT_BACKENDS_INIT(); ret_code_t ret_code = nrf_pwr_mgmt_init(); APP_ERROR_CHECK(ret_code); saadc_init(); saadc_sampling_event_init(); saadc_sampling_event_enable(); NRF_LOG_INFO("SAADC HAL simple example started."); while (1) { nrf_pwr_mgmt_run(); NRF_LOG_FLUSH(); } } /** @} */
Thank, but your file is exatly same at my code.
I ask a conversion each 1 mS but sometime the vale are swapped.
Marco
Can you test this one?
/** * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * @defgroup nrf_adc_example main.c * @{ * @ingroup nrf_adc_example * @brief ADC Example Application main file. * * This file contains the source code for a sample application using ADC. * * @image html example_board_setup_a.jpg "Use board setup A for this example." */ #include <stdbool.h> #include <stdint.h> #include <stdio.h> #include <string.h> #include "nrf.h" #include "nrf_drv_saadc.h" #include "nrf_drv_ppi.h" #include "nrf_drv_timer.h" #include "boards.h" #include "app_error.h" #include "nrf_delay.h" #include "app_util_platform.h" #include "nrf_pwr_mgmt.h" #include "nrf_log.h" #include "nrf_log_ctrl.h" #include "nrf_log_default_backends.h" #define SAMPLES_IN_BUFFER 2 volatile uint8_t state = 1; static const nrf_drv_timer_t m_timer = NRF_DRV_TIMER_INSTANCE(0); static nrf_saadc_value_t m_buffer_pool[2][SAMPLES_IN_BUFFER]; static nrf_ppi_channel_t m_ppi_channel; static uint32_t m_adc_evt_counter; void timer_handler(nrf_timer_event_t event_type, void * p_context) { } void saadc_sampling_event_init(void) { ret_code_t err_code; err_code = nrf_drv_ppi_init(); APP_ERROR_CHECK(err_code); nrf_drv_timer_config_t timer_cfg = NRF_DRV_TIMER_DEFAULT_CONFIG; timer_cfg.bit_width = NRF_TIMER_BIT_WIDTH_32; err_code = nrf_drv_timer_init(&m_timer, &timer_cfg, timer_handler); APP_ERROR_CHECK(err_code); /* setup m_timer for compare event every 400ms */ uint32_t ticks = nrf_drv_timer_ms_to_ticks(&m_timer, 1); nrf_drv_timer_extended_compare(&m_timer, NRF_TIMER_CC_CHANNEL0, ticks, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false); nrf_drv_timer_enable(&m_timer); uint32_t timer_compare_event_addr = nrf_drv_timer_compare_event_address_get(&m_timer, NRF_TIMER_CC_CHANNEL0); uint32_t saadc_sample_task_addr = nrf_drv_saadc_sample_task_get(); /* setup ppi channel so that timer compare event is triggering sample task in SAADC */ err_code = nrf_drv_ppi_channel_alloc(&m_ppi_channel); APP_ERROR_CHECK(err_code); err_code = nrf_drv_ppi_channel_assign(m_ppi_channel, timer_compare_event_addr, saadc_sample_task_addr); APP_ERROR_CHECK(err_code); } void saadc_sampling_event_enable(void) { ret_code_t err_code = nrf_drv_ppi_channel_enable(m_ppi_channel); APP_ERROR_CHECK(err_code); } void saadc_callback(nrf_drv_saadc_evt_t const * p_event) { if (p_event->type == NRF_DRV_SAADC_EVT_DONE) { ret_code_t err_code; err_code = nrf_drv_saadc_buffer_convert(p_event->data.done.p_buffer, SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); if(m_adc_evt_counter%100 == 0) { int i; NRF_LOG_RAW_INFO("%d, ", (int)m_adc_evt_counter); for (i = 0; i < SAMPLES_IN_BUFFER; i++) { NRF_LOG_RAW_INFO("%d,", p_event->data.done.p_buffer[i]); } NRF_LOG_RAW_INFO("\r\n"); } m_adc_evt_counter++; } } void saadc_init(void) { ret_code_t err_code; nrf_saadc_channel_config_t channel_config0 = NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN0); nrf_saadc_channel_config_t channel_config1 = NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN1); err_code = nrf_drv_saadc_init(NULL, saadc_callback); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(0, &channel_config0); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_channel_init(1, &channel_config1); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool[0], SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); err_code = nrf_drv_saadc_buffer_convert(m_buffer_pool[1], SAMPLES_IN_BUFFER); APP_ERROR_CHECK(err_code); } /** * @brief Function for main application entry. */ int main(void) { uint32_t err_code = NRF_LOG_INIT(NULL); APP_ERROR_CHECK(err_code); NRF_LOG_DEFAULT_BACKENDS_INIT(); ret_code_t ret_code = nrf_pwr_mgmt_init(); APP_ERROR_CHECK(ret_code); saadc_init(); saadc_sampling_event_init(); saadc_sampling_event_enable(); NRF_LOG_INFO("SAADC HAL simple example started."); while (1) { nrf_pwr_mgmt_run(); NRF_LOG_FLUSH(); } } /** @} */
I can't see that the values are swapped. Are they if you run the project with this main.c file?
In your case, how do you determine that the values/channels are swapped?