BT832X clock configuration

[Avi A]

SDK version: nRF5_SDK_15.0.0_a53641a

Softdevice version: s132_nrf52_6.0.0_softdevice

I am trying to evaluate Fanstel BT832X SOC. I am using the ble_app_uart example. I am trying to enable the SKY66112 PA in order to compare range performance with BT832F.

I am using a custom PCB without an external oscillator.

In order to enable the PA user manual for BT832X required the following clock configuration: 

#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_SYNTH, \
.rc_ctiv = 0, \
.rc_temp_ctiv = 0, \
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_250_PPM}

So I made the following changes to the sdk_config.h to set the above configurations

1. #define CLOCK_CONFIG_LF_SRC  1

2. #define NRF_SDH_CLOCK_LF_SRC 2

3. #define NRF_SDH_CLOCK_LF_ACCURACY 0

Do I need to make any other setting in the sdk_config.h or any other files for the correct clock configuration as described in the BT832X user manual?

[Simonr]

Hi Avi

You could check out this thread, as well as the PA/LNA support blog here on DevZone to see if that helps.

The sdk_config.h file is specific to that one project, while the PCA10040.h file will make changes to all the projects within the SDK that are using it. What exact changes were you making in PCA10400.h and sdk_config.h that only worked in sdk_config?

Best regards,

Simon