How to connect from one Bluetooth to other Bluetooth devices

[chandanaraju]

Hi,

I am using nrf51 dk  with sdk 12.3 and softdevice S130 bluetooth module using Keil IDE.In our project we need to send sensor data from the nrf51 bluetooth module to another bluetooth module which is Tivas's bluetooth module which is in dk board.so here my question is how do i need to connect with this bluetooth module by using bluetooth  address.Bcoz Tivas bluetooth will connect through bluetooth address with different module.

so plz how do i connect through bluetooth address and tell me  which example program do i need to use for this.

[Edvin]

Ok. Based on the information in this ticket so far, you have another BLE device acting as a central which you want to connect to the nRF51, and you want to use this link to send some sensor data.

The peripheral is the device that is advertising, and the central is the device that is scanning for and connecting to a peripheral. So you need to make the nRF advertise (most examples in our SDK does this. Look at the examples in SDK\examples\ble_peripheral. E.g. the ble_app_uart example. 

Then you need to make your central connect to this device, based on some filter in the central. Either address or some part of the advertising message (Advertising name, advertised service uuids, etc.).

I am not familiar with TI's SDK solution, so you would need to ask them.

In addition, if you want to transfer sensor data from the nRF to the central, you need to use a BLE Service and characteristic for this.

I suggest you walk through these three tutorials in this order:

1: https://devzone.nordicsemi.com/nordic/short-range-guides/b/bluetooth-low-energy/posts/ble-advertising-a-beginners-tutorial

2: https://devzone.nordicsemi.com/nordic/short-range-guides/b/bluetooth-low-energy/posts/ble-services-a-beginners-tutorial

3: https://devzone.nordicsemi.com/nordic/short-range-guides/b/bluetooth-low-energy/posts/ble-characteristics-a-beginners-tutorial

[chandanaraju]

Thanks for replying.

In TI's Bluetooth it is connecting through Bluetooth address ,pairing and also check with them .Can you plz tell me how to get the Bluetooth address of the device and sdk example which contain bluetooth address to identify.

[Edvin]

That depends on your compiler. Did you try to copy the project file to another folder in the SDK? Or outside the SDK?

[chandanaraju]

No, I have downloaded the SDK  and unzip the SDK and i tried to run the example project ble_app_uart by using open project and tried to compile  the program

[awneil]

This is really a separate question - so should be in a new thread.

But first, see: devzone.nordicsemi.com/.../184681

If your original question about connecting the Tiva & NRF is resolved, please verify the answer.

[Edvin]

Maybe the path to the files are too long? Windows has a limitation on something like 256 chars in paths.

Try to unzip the SDK closer to the C drive. Create a folder called Nordic_semiconductor in the C: drive and unzip so that the SDK has the path:

C:\Nordic_Semiconductor\SDK15.3.0

And then try to compile it. If that doesn't work, what IDE do you use, and what SDK version do you use? Is it Segger Embedded Studio and SDK15.3.0?

[chandana k v]

Thanks for replying.

i will try. i am using keil 5 uvision and SDK is 12.3.0

[chandana k v]

Thanks.

It is working

[awneil]

Jolly good!