The firrmware of the connected J-link doesnt support the following memory access: Read @ 0x02000004

[Nats]

Hello, im relatively new to this and not sure why im getting this error. According to previous such error clarifications, i read that the newest versions have to be used. Im using the most recent version of all softwares. But still getting the following error. Can someone kindly guide me.Below are comment error, target settings and version of software 

JLink info:
------------
DLL: V5.12f, compiled May 17 2016 16:03:35
Firmware: J-Link Lite-Cortex-M V9 compiled May 17 2019 09:50:01
Hardware: V9.00
S/N : 519001316
Feature(s) : GDB

* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: SWD speed too high. Reduced from 4000 kHz to 2025 kHz 
for stability
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
ROMTableAddr = 0xE00FF000

Target info:
------------
Device: nRF52832_xxAA
VTarget = 2.070V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 255
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 2000 kHz

Error: Flash Download failed  -  Target DLL has been cancelled
Flash Load finished at 18:28:57
Load "C:\\Users\\kd_studies\\Desktop\\Arbeit 
software\\installing\\nRF5_SDK_15.3.0_59ac345\\nRF5_SDK_15.3.0_59ac345\\examples\\ant\\ant_io_demo\\ant_io_tx\\d52_starterkit\\s212\\arm5_no_packs\\_build\\nrf52832_xxaa.axf"
Set JLink Project File to "C:\Users\kd_studies\Desktop\Arbeit 
software\installing\nRF5_SDK_15.3.0_59ac345\nRF5_SDK_15.3.0_59ac345\examples\ant\ant_io_demo\ant_io_tx\d52_starterkit\s212\arm5_no_packs\JLinkSettings.ini"
* JLink Info: Device "NRF52832_XXAA" selected.

JLink info:
------------
DLL: V5.12f, compiled May 17 2016 16:03:35
Firmware: J-Link Lite-Cortex-M V9 compiled May 17 2019 09:50:01
Hardware: V9.00
S/N : 519001316
Feature(s) : GDB

* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: SWD speed too high. Reduced from 4000 kHz to 1518 kHz 
for stability
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
ROMTableAddr = 0xE00FF000

Target info:
------------
Device: nRF52832_xxAA
VTarget = 1.998V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 255
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 1500 kHz

Error: Flash Download failed  -  Target DLL has been cancelled
Flash Load finished at 18:32:27
Load "C:\\Users\\kd_studies\\Desktop\\Arbeit 
software\\installing\\nRF5_SDK_15.3.0_59ac345\\nRF5_SDK_15.3.0_59ac345\\examples\\ant\\ant_io_demo\\ant_io_tx\\d52_starterkit\\s212\\arm5_no_packs\\_build\\nrf52832_xxaa.axf"
Set JLink Project File to "C:\Users\kd_studies\Desktop\Arbeit 
software\installing\nRF5_SDK_15.3.0_59ac345\nRF5_SDK_15.3.0_59ac345\examples\ant\ant_io_demo\ant_io_tx\d52_starterkit\s212\arm5_no_packs\JLinkSettings.ini"
* JLink Info: Device "NRF52832_XXAA" selected.

JLink info:
------------
DLL: V5.12f, compiled May 17 2016 16:03:35
Firmware: J-Link Lite-Cortex-M V9 compiled May 17 2019 09:50:01
Hardware: V9.00
S/N : 519001316
Feature(s) : GDB

* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: SWD speed too high. Reduced from 4000 kHz to 1518 kHz 
for stability
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
ROMTableAddr = 0xE00FF000

Target info:
------------
Device: nRF52832_xxAA
VTarget = 2.012V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 255
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 1500 kHz

Error: Flash Download failed  -  Target DLL has been cancelled
Flash Load finished at 18:32:35
Load "C:\\Users\\kd_studies\\Desktop\\Arbeit 
software\\installing\\nRF5_SDK_15.3.0_59ac345\\nRF5_SDK_15.3.0_59ac345\\examples\\ant\\ant_io_demo\\ant_io_tx\\d52_starterkit\\s212\\arm5_no_packs\\_build\\nrf52832_xxaa.axf"
Set JLink Project File to "C:\Users\kd_studies\Desktop\Arbeit 
software\installing\nRF5_SDK_15.3.0_59ac345\nRF5_SDK_15.3.0_59ac345\examples\ant\ant_io_demo\ant_io_tx\d52_starterkit\s212\arm5_no_packs\JLinkSettings.ini"
* JLink Info: Device "NRF52832_XXAA" selected.

JLink info:
------------
DLL: V5.12f, compiled May 17 2016 16:03:35
Firmware: J-Link Lite-Cortex-M V9 compiled May 17 2019 09:50:01
Hardware: V9.00
S/N : 519001316
Feature(s) : GDB

* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: SWD speed too high. Reduced from 4000 kHz to 1138 kHz 
for stability
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
ROMTableAddr = 0xE00FF000

Target info:
------------
Device: nRF52832_xxAA
VTarget = 2.004V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 255
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 1130 kHz

Error: Flash Download failed  -  Target DLL has been cancelled
Flash Load finished at 18:32:55
Load "C:\\Users\\kd_studies\\Desktop\\Arbeit 
software\\installing\\nRF5_SDK_15.3.0_59ac345\\nRF5_SDK_15.3.0_59ac345\\examples\\ant\\ant_io_demo\\ant_io_tx\\d52_starterkit\\s212\\arm5_no_packs\\_build\\nrf52832_xxaa.axf"
Set JLink Project File to "C:\Users\kd_studies\Desktop\Arbeit 
software\installing\nRF5_SDK_15.3.0_59ac345\nRF5_SDK_15.3.0_59ac345\examples\ant\ant_io_demo\ant_io_tx\d52_starterkit\s212\arm5_no_packs\JLinkSettings.ini"
* JLink Info: Device "NRF52832_XXAA" selected.

JLink info:
------------
DLL: V5.12f, compiled May 17 2016 16:03:35
Firmware: J-Link Lite-Cortex-M V9 compiled May 17 2019 09:50:01
Hardware: V9.00
S/N : 519001316
Feature(s) : GDB

* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
ROMTableAddr = 0xE00FF000

Target info:
------------
Device: nRF52832_xxAA
VTarget = 2.058V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 255
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 942 kHz

Error: Flash Download failed  -  Target DLL has been cancelled
Flash Load finished at 18:34:01

-----------------------------------------------------------------------------------------------------------

Target settigs are as below

--------------------------------------------------------------------------------------------------------------------------------

Software version keil   --   5.28

nRgo Studio   --     1.21.2.10   

SDK --    nRF5_SDK_15.3.0_59ac345   

J-link   --  6.50b

ANT soft device     --     s332

[Einar Thorsrud]

Hi,

I am not sure if this is the problem, but it seems V5.12f is being used, even if you have newer installed. Can you uninstall everything segger-related, and install just the newest and see what happens? Also, what happens if you try to program from nrfjprog or nRF Connect Programmer? 

[Nats]

nRFGo 

But Keil still throws the same error

[Einar Thorsrud]

I see. I do not see the full log from nRFgoSudio though, since the result of flashing the application is too far to the right on the line. What does it say? I do not recall seeing this before, but generally, a good idea with similar issues is to uninstall everything Segger J-Link related, reboot and install juts the latest J-Link software. Have you tried that?

[awneil]

Einar Thorsrud said:

the result of flashing the application is too far to the right on the line

Nats That's why it's better to copy & paste as text.

Proceed as for source code, but omit step 3:

[Nats]

It says succesful...   Sorry having trouble copying the log file, hence the photo

And i tried reinstallling J-link, 6.50a and b....both are throwing error.... Im using Keil, J-link, nRFGo Studio.  Should i install anything else?

[Einar Thorsrud]

I see. I have had problems with Segger J-link not working correctly a few times, and though I never found out what actually caused it, uninstalling all Segger related and everything that depended on it, rebooting and installing again solved the problem. Please try that again first. Note that the reboot between uninstalling and installing is important in my experience, at least if you are using MS Windows.

[Nats]

is the compiler default or should i change that too in target settings?

[Einar Thorsrud]

Hi,

I think I am missing some context, but if you are asking about the example Keil projects, then no - you don't need to change anything. They are correctly set up when you extract the SDK and will build out of the box.