nRF51822 UART not work

[yillkid]

Hi all My hardware is nRF51822 PCA0000 and PCA0001, I just want to compile/load any UART example to test my UART workable or not. So I have tried example project button_radio_example、led_radio_example and uart_example, I got no signal on hypetrm with any example project. I set break point on Keil with any example project and got the same result, the processing hang on :

PCA0000 :

void simple_uart_put(uint8_t cr)
{
  NRF_UART0->TXD = (uint8_t)cr;

  while (NRF_UART0->EVENTS_TXDRDY!=1)   // HANG ON THIS LINE !!!!!!
  {
    // Wait for TXD data to be sent
  }

  NRF_UART0->EVENTS_TXDRDY=0;
}

PCA0001 :

uint8_t simple_uart_get(void)
{
  while (NRF_UART0->EVENTS_RXDRDY != 1)   // HANG ON THIS LINE !!!!!!
  {
    // Wait for RXD data to be received
  }
  
  NRF_UART0->EVENTS_RXDRDY = 0;
  return (uint8_t)NRF_UART0->RXD;
}

any idea ?

[yillkid]

I ever use putty and hypertrm and they all not work. I am sure I test with correct port !

Because I only have two UART ports.

But I find the default bound rate of the two UART is 9600 not 38400, I fix them but still not work, but is this a correct default value ?

I just have PCA0000 and PCA0001 two boards,I did not buy the motherboard. So I can not test with pins right ? any other way ?