Programming FANSTEL Modules

[Aks666]

Hi,

I have fanstel BM833A modules which is NRF52811.

I am using Segger Embedded Studio.

How can i program the module through segger IDE using ST-LINK?

And also i have NRF52833 DK is it possible program the module using DK?

[Kenneth]

This may be relevant:
https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/ 

You can program external boards from nRF52833-DK provided VDD is about 3V on target board.

[Aks666]

I have programmed the module using DK with beacon example but  i can not see the beacons in nRF Connect app.

Will you suggest the SDK for BM833A(NRF52811)  and softdevice.

[Kenneth]

My recommendation is to get yourself an nRF52840-DK and use the nRF5 SDK. Then check out this:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v16.0.0/nrf52811_user_guide.html?cp=6_1_5_1 

Once you first verify it works on the nRF52840-DK, then next step is to transfer it to your nRF52811 enabled hardware:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v16.0.0/nrf52811_user_guide.html?cp=6_1_5_1_3#ug_52811_project