Hi everybody,
I test the pstorage library. But it didn't work. I print the result with uart, as the image shows. But as you see, It has some problem. And I have no idea why.
I show the code In the following. I hope somebody can help me find which step went wrong.
By the way, I used the softdevice s110 v7.1.
Many thanks!
main function:
uint8_t data[4]={1,2,3,4};
uint8_t getdata[8];
storage_init();
clear_data();
store_data(0,data,4,0);
printf("store\r\n ");
printf("%d ",data[0]);
printf("%d ",data[1]);
printf("%d ",data[2]);
printf("%d \r\n",data[3]);
load_data(0,getdata,4,0);
printf("load \r\n ");
printf("%d ",getdata[0]);
printf("%d ",getdata[1]);
printf("%d ",getdata[2]);
printf("%d \r\n",getdata[3]);
function I used:
static void example_cb_handler(pstorage_handle_t * handle,
uint8_t op_code,
uint32_t result,
uint8_t * p_data,
uint32_t data_len)
{
switch(op_code)
{
case PSTORAGE_LOAD_OP_CODE:
if (result == NRF_SUCCESS)
{
printf("OP successful\r\n");
}
else
{
printf("OP failed.\r\n");
}
// Source memory can now be reused or freed.
break;
}
}
======
static pstorage_handle_t base_handle;
static void storage_init(void)
{
uint32_t retval;
retval = pstorage_init();
if(retval == NRF_SUCCESS)
{
printf("Module initialization successful\r\n");
}
else
{
printf("Initialization failed, take corrective action.\r\n");
}
pstorage_module_param_t param;
param.block_size = 16;
param.block_count = 32;
param.cb = example_cb_handler;
retval = pstorage_register(¶m, &base_handle);
if (retval == NRF_SUCCESS)
{
printf("Registration successful%d %d.\r\n",base_handle.module_id,base_handle.block_id);
}
else
{
printf("Registration failed.\r\n");
}
}
=======
static void load_data(pstorage_size_t block_num,
uint8_t * dest_data,
pstorage_size_t size,
pstorage_size_t offset)
{
pstorage_handle_t block_handle;
uint32_t retval;
retval = pstorage_block_identifier_get(&base_handle, block_num, &block_handle);
if (retval == NRF_SUCCESS)
{
printf("get block ID success.ID: %d\r\n",block_handle.block_id);
}
else
{
printf("get block failed.\r\n");
}
// Request to read 4 bytes from block at an offset of 12 bytes.
retval = pstorage_load(dest_data, &block_handle, size, offset);
if (retval == NRF_SUCCESS)
{
printf("load success.\r\n");
}
else
{
printf("load failed.\r\n");
}
}
========
static void store_data(pstorage_size_t block_num,
uint8_t * source_data,
pstorage_size_t size,
pstorage_size_t offset)
{
pstorage_handle_t block_handle;
uint32_t retval;
retval = pstorage_block_identifier_get(&base_handle, block_num, &block_handle);
if (retval == NRF_SUCCESS)
{
printf("get block ID success.ID: %d\r\n",block_handle.block_id);
}
else
{
printf("get block failed.\r\n");
}
// Request to write 8 bytes to block at an offset of 20 bytes.
retval = pstorage_store(&block_handle, source_data, size, offset);
if (retval == NRF_SUCCESS)
{
printf("store success.\r\n");
}
else
{
printf("store failed.\r\n");
}
}
=======
static void clear_data(void){
uint32_t retval;
// Request clearing of all blocks in the module. 32 blocks each with 16 bytes in size.
retval = pstorage_clear(&base_handle, 16 * 32);
if (retval == NRF_SUCCESS)
{
printf("clear success.\r\n");
}
else
{
printf("clear failed.\r\n");
}
}
