Hi,
I have a problem with coap response. I use iot coap library.
Client send nonconfirmable coap message with payload to broadcast addr
Server get payload and send nonconfirmable response without payload to p_message.remote address.
Server use message id and token from request but client dont get response.
I was seen the request and response from server on nrf sniffer but client dont get the response, but cames response error.
Can you help me find problem?
Thank you.
Frantisek
void coap_pir_send_request(uint8_t state)
{
coap_message_t * p_request;
coap_message_conf_t message_conf;
coap_remote_t remote_device;
uint32_t err_code;
memset(&message_conf, 0, sizeof(message_conf));
message_conf.type = COAP_TYPE_NON;
message_conf.code = COAP_CODE_GET;
message_conf.port.port_number = COAP_PORT;
message_conf.id = coap_header_message_id++;
(void)uint16_encode(HTONS(coap_header_token), message_conf.token);
coap_header_token++;
message_conf.token_len = sizeof(coap_header_token);
message_conf.response_callback = coap_pir_response_callback;
err_code = coap_message_new(&p_request, &message_conf);
APP_ERROR_CHECK(err_code);
//TODO leader address
//fde5:8dba:82e1:1::ff:fe00:fc00
err_code = otIp6AddressFromString((char *)"ff03::1", (otIp6Address *)&remote_device.addr[0]);
ASSERT(err_code == OT_ERROR_NONE);
remote_device.port_number = COAP_PORT;
err_code = coap_message_remote_addr_set(p_request, &remote_device);
APP_ERROR_CHECK(err_code);
err_code = coap_message_opt_str_add(p_request, COAP_OPT_URI_PATH, (uint8_t *)"pir", 3);
APP_ERROR_CHECK(err_code);
err_code = coap_message_payload_set(p_request, &state, sizeof(state));
APP_ERROR_CHECK(err_code);
uint32_t handle;
NRF_LOG_INFO("send coap message pir state");
err_code = coap_message_send(&handle, p_request);
if (err_code != NRF_SUCCESS)
{
NRF_LOG_ERROR("CoAP Message skipped, error code = 0x%08lX.", err_code);
}
err_code = coap_message_delete(p_request);
APP_ERROR_CHECK(err_code);
//TODO led
//nrf_gpio_pin_toggle(12);
}
void coap_pir_response_callback(uint32_t status, void * p_arg, coap_message_t * p_message)
{
NRF_LOG_INFO("coap pi response callback ---------------");
if(status == NRF_SUCCESS)
{
NRF_LOG_INFO("pir response");
coap_pir_msg_resend = 0;
}
else
{
NRF_LOG_INFO("response error");
if(coap_pir_msg_resend++ < COAP_PIR_MSG_MAX_RESEND)
{
coap_pir_send_request(coap_pir_last_state);
}
else
{
coap_pir_msg_resend = 0;
NRF_LOG_INFO("error: no response from lamp");
}
}
}
client code
void coap_pir_request_callback(coap_resource_t * p_resource, coap_message_t * p_request)
{
coap_message_conf_t pir_response_config;
NRF_LOG_INFO("coap pir rq callback");
//evaluate pir request
//------------------------------------------------
if(use_pir_messages)
{
if(p_request->p_payload[0] == 1)
{
//movement stop
pir_set_lc_pin(1);
}
else
{
//movement start
pir_set_lc_pin(0);
}
}
//-------------------------------------------------
if (p_request->header.type == COAP_TYPE_NON)
{
pir_response_config.type = COAP_TYPE_NON;
}
else if (p_request->header.type == COAP_TYPE_CON)
{
pir_response_config.type = COAP_TYPE_ACK;
}
pir_response_config.id = p_request->header.id;
pir_response_config.code = COAP_CODE_204_CHANGED;
pir_response_config.port.port_number = COAP_PORT;
pir_response_config.token_len = p_request->header.token_len;
memcpy(&pir_response_config.token[0], &p_request->token[0], p_request->header.token_len);
coap_pir_response_send(pir_response_config, p_request->remote);
}
void coap_pir_response_send(coap_message_conf_t message_conf, coap_remote_t remote_address)
{
coap_message_t * p_response;
uint32_t msg_handle;
uint32_t err_code = coap_message_new(&p_response, &message_conf);
APP_ERROR_CHECK(err_code);
err_code = coap_message_remote_addr_set(p_response, &remote_address);
APP_ERROR_CHECK(err_code);
err_code = coap_message_send(&msg_handle, p_response);
NRF_LOG_INFO("sen pir resp %d", err_code);
APP_ERROR_CHECK(err_code);
NRF_LOG_INFO("sended coap message pir response");
err_code = coap_message_delete(p_response);
APP_ERROR_CHECK(err_code);
}
//------------------------------------------------------------------------------
//---------------------------- coap mod_mes messages ---------------------------
//------------------------------------------------------------------------------
void coap_mod_msg_request_callback(coap_resource_t * p_resource, coap_message_t * p_request)
{
//TODO
nrf_gpio_pin_toggle(12);
//save info about peer
if (p_request->header.type == COAP_TYPE_NON)
{
response_config.type = COAP_TYPE_NON;
}
else if (p_request->header.type == COAP_TYPE_CON)
{
response_config.type = COAP_TYPE_ACK;
}
response_config.code = COAP_CODE_205_CONTENT;
response_config.id = p_request->header.id;
response_config.port.port_number = COAP_PORT;
response_config.token_len = p_request->header.token_len;
memcpy(&response_config.token[0], &p_request->token[0], p_request->header.token_len);
remote = p_request->remote;
if(memcmp(p_request->p_payload, modbus_cmd_hello_get_lcid, p_request->payload_len) == 0)
{
address_state = ADDRESS_STATE_LCID_NOT_SEND;
coap_mod_msg_response_send(NULL, 0);
}
else
{
modbus_lc_request(p_request->p_payload, p_request->payload_len);
}
NRF_LOG_INFO("received data, len: %d",p_request->payload_len);
}
void coap_mod_msg_response_send(uint8_t* data, uint16_t size)
{
coap_message_t * p_response;
uint32_t msg_handle;
uint32_t err_code = coap_message_new(&p_response, &response_config);
APP_ERROR_CHECK(err_code);
err_code = coap_message_remote_addr_set(p_response, &remote);
APP_ERROR_CHECK(err_code);
if(size < 0 || data != NULL)
{
err_code = coap_message_payload_set(p_response, data, size);
APP_ERROR_CHECK(err_code);
}
NRF_LOG_INFO("response send, size of send %d", size);
err_code = coap_message_send(&msg_handle, p_response);
NRF_LOG_INFO("error %d: ", err_code);
//APP_ERROR_CHECK(err_code);
NRF_LOG_INFO("sended coap message mod_msg response");
err_code = coap_message_delete(p_response);
APP_ERROR_CHECK(err_code);
}
//------------------------------------------------------------------------------
//---------------------------- coap address messages ---------------------------
//------------------------------------------------------------------------------
void coap_address_send_request(uint16_t lcid)
{
coap_message_t * p_request;
coap_message_conf_t message_conf;
coap_remote_t remote_device;
uint32_t err_code;
memset(&message_conf, 0, sizeof(message_conf));
message_conf.type = COAP_TYPE_NON;
message_conf.code = COAP_CODE_GET;
message_conf.port.port_number = COAP_PORT;
message_conf.id = coap_header_message_id++;
(void)uint16_encode(HTONS(coap_header_token), message_conf.token);
coap_header_token++;
message_conf.token_len = sizeof(coap_header_token);
message_conf.response_callback = coap_address_response_callback;
err_code = coap_message_new(&p_request, &message_conf);
APP_ERROR_CHECK(err_code);
//TODO leader address
err_code = otIp6AddressFromString((char *)"ff03::1", (otIp6Address *)&remote_device.addr[0]);
ASSERT(err_code == OT_ERROR_NONE);
remote_device.port_number = COAP_PORT;
err_code = coap_message_remote_addr_set(p_request, &remote_device);
APP_ERROR_CHECK(err_code);
err_code = coap_message_opt_str_add(p_request, COAP_OPT_URI_PATH, (uint8_t *)"adr", 3);
APP_ERROR_CHECK(err_code);
err_code = coap_message_payload_set(p_request, &lcid, sizeof(uint16_t));
APP_ERROR_CHECK(err_code);
uint32_t handle;
NRF_LOG_INFO("send coap message lcid");
err_code = coap_message_send(&handle, p_request);
if (err_code != NRF_SUCCESS)
{
NRF_LOG_ERROR("CoAP Message skipped, error code = 0x%08lX.", err_code);
}
err_code = coap_message_delete(p_request);
APP_ERROR_CHECK(err_code);
//TODO led
//nrf_gpio_pin_toggle(12);
}
void coap_address_response_callback(uint32_t status, void * p_arg, coap_message_t * p_message)
{
if(status == NRF_SUCCESS)
{
address_state = ADDRESS_STATE_UP_TO_DATE;
addresses.ipv6 = get_my_actual_ip6_addr();
NRF_LOG_INFO("addr response------PAUSE----");
}
else
{
NRF_LOG_INFO("response error");
}
}
server code
Maybe you can share the sniffer log? Do the issue only occur with empty payload in the response, or does it also happen if you piggy back the response? Try to memset(&pir_response_config, 0x00, sizeof(coap_message_conf_t));
Is the status code COAP_TRANSMISSION_RESET_BY_PEER or COAP_TRANSMISSION_TIMEOUT?
Maybe you can share the sniffer log? Do the issue only occur with empty payload in the response, or does it also happen if you piggy back the response? Try to memset(&pir_response_config, 0x00, sizeof(coap_message_conf_t));
Is the status code COAP_TRANSMISSION_RESET_BY_PEER or COAP_TRANSMISSION_TIMEOUT?
I try add payload and memset(&pir_response_config, 0x00, sizeof(coap_message_conf_t)); but it not helped.
status code: COAP_TRANSMISSION_TIMEOUT
#define COAP_MAX_TRANSMISSION_SPAN 2
#define COAP_MAX_RETRANSMIT_COUNT 0
in this capture I send frist request and cca after 10 seconds second request.
Are you using the open thread border router? Can you try to do log the traffic using tcp dump, something like:
The we can see if the packets have the correct destination address.
I dont use openthread border router. Is exist different way to capture this packets?
Hi, based on the sniffer log you sent I thought you were developing with Thread, since it says 802.15.4, but now I'm not so sure. The functions you are using in your code come from the BLE IoT library. So are you using the BLE based IoT library?
If so, can you post the output of "ifconfig" and specifically check if the bt0 interface has gotten a global IP? Also, have you installed radvd so the global IP is given to the client?
Also please describe the whole setup. Which protocol you're developing on, which libraries, what type of hardware, DKs, computers, servers, etc... Thanks a lot!
I use library from: nRF5_SDK_for_Thread_and_Zigbee_v4.1.0_32ce5f8\components\iot\coap
I use Thread but I communicate point to point without border router
I use nRF52840 specifically Fanstel BT840F
