Hi
In my application, I use nrf52811 to relay data to make the data go further. If data is sent from point A to point B, point B receives the data and then forwards to point C. The sending and
receiving of point B use the same chip and wireless transceiver circuit.
I see the following state diagram from the specification of 52811 and think that 52811 should be able to achieve this function. I tried, but no success！
Can receive the data packet at point A, but failed to forward the data to point C.
Can anyone help me solve this problem? thanks
NRF_RADIO->TASKS_STOP = 1U;
packet[0]=13; //
for(i=1;i<13;i++)
packet[i]=j;
j=(j+1)%10;
send_packet();
/**@brief Function for sending packet.
*/
void send_packet()
{
// send the packet:
NRF_RADIO->EVENTS_READY = 0U;
NRF_RADIO->TASKS_TXEN = 1;
while (NRF_RADIO->EVENTS_READY == 0U)
{
// wait
}
NRF_RADIO->EVENTS_END = 0U;
NRF_RADIO->TASKS_START = 1U;
while (NRF_RADIO->EVENTS_END == 0U)
{
// wait
}
uint32_t err_code = bsp_indication_set(BSP_INDICATE_SENT_OK);
NRF_LOG_INFO("The packet was sent");
APP_ERROR_CHECK(err_code);
NRF_RADIO->EVENTS_DISABLED = 0U;
// Disable radio
NRF_RADIO->TASKS_DISABLE = 1U;
while (NRF_RADIO->EVENTS_DISABLED == 0U)
{
// wait
}
}
