I am using NCS 1.3.0. I try to build mcuboot with CONFIG_PM_SINGLE_IMAGE=y and it looks like partition manager is never run. I do not get any partitions.yml output in my build folder.
Command line output:
> Executing task in folder pinnacle_firmware: west build -b pinnacle_100_dvk -d /Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot /Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/../bootloader/mcuboot/boot/zephyr -- -DCONF_FILE="${workspaceFolder}/../modules/zephyr_lib/mcuboot_config/mcuboot-qspi.conf ${workspaceFolder}/../modules/zephyr_lib/mcuboot_config/overlay-disable-hl7800-modem.conf ${workspaceFolder}/../modules/zephyr_lib/mcuboot_config/mcuboot-serial-pinnacle100_dvk.conf ${workspaceFolder}/../modules/zephyr_lib/mcuboot_config/disable-signature-check.conf" <
-- west build: generating a build system
Including boilerplate (Zephyr base): /Users/ryan/git/pinnacle100_workspace/zephyr/cmake/app/boilerplate.cmake
-- Application: /Users/ryan/git/pinnacle100_workspace/bootloader/mcuboot/boot/zephyr
-- Zephyr version: 2.3.0-rc1 (/Users/ryan/git/pinnacle100_workspace/zephyr)
-- Found Python3: /usr/local/bin/python3.7 (found suitable exact version "3.7.6") found components: Interpreter
-- Board: pinnacle_100_dvk
-- Found west: /usr/local/bin/west (found suitable version "0.7.2", minimum required is "0.7.1")
-- Found dtc: /usr/local/bin/dtc (found suitable version "1.5.0", minimum required is "1.4.6")
-- Found toolchain: gnuarmemb (/usr/local/Caskroom/gcc-arm-embedded/9-2019-q4-major/gcc-arm-none-eabi-9-2019-q4-major)
-- Found BOARD.dts: /Users/ryan/git/pinnacle100_workspace/zephyr/boards/arm/pinnacle_100_dvk/pinnacle_100_dvk.dts
-- Found devicetree overlay: /Users/ryan/git/pinnacle100_workspace/bootloader/mcuboot/boot/zephyr/dts.overlay
-- Generated zephyr.dts: /Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: /Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot/zephyr/include/generated/devicetree_unfixed.h
Parsing /Users/ryan/git/pinnacle100_workspace/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration '/Users/ryan/git/pinnacle100_workspace/zephyr/boards/arm/pinnacle_100_dvk/pinnacle_100_dvk_defconfig'
Merged configuration '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/../modules/zephyr_lib/mcuboot_config/mcuboot-qspi.conf'
Merged configuration '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/../modules/zephyr_lib/mcuboot_config/overlay-disable-hl7800-modem.conf'
Merged configuration '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/../modules/zephyr_lib/mcuboot_config/mcuboot-serial-pinnacle100_dvk.conf'
Merged configuration '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/../modules/zephyr_lib/mcuboot_config/disable-signature-check.conf'
Configuration saved to '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot/zephyr/.config'
Kconfig header saved to '/Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot/zephyr/include/generated/autoconf.h'
-- The C compiler identification is GNU 9.2.1
-- The CXX compiler identification is GNU 9.2.1
-- The ASM compiler identification is GNU
-- Found assembler: /usr/local/Caskroom/gcc-arm-embedded/9-2019-q4-major/gcc-arm-none-eabi-9-2019-q4-major/bin/arm-none-eabi-gcc
-- Cache files will be written to: /Users/ryan/Library/Caches/zephyr
CMake Warning at /Users/ryan/git/pinnacle100_workspace/nrf/lib/flash_patch/CMakeLists.txt:9 (message):
----------------------------------------------------------
--- WARNING: To maintain the integrity of secure boot, ---
--- enable CONFIG_DISABLE_FLASH_PATCH in production. ---
----------------------------------------------------------
-- Configuring done
-- Generating done
-- Build files have been written to: /Users/ryan/git/pinnacle100_workspace/pinnacle_firmware/build/mcuboot
-- west build: building application
[1/254] Preparing syscall dependency handling
[249/254] Linking C executable zephyr/zephyr_prebuilt.elf
Memory region Used Size Region Size %age Used
FLASH: 49880 B 96 KB 50.74%
SRAM: 30800 B 256 KB 11.75%
IDT_LIST: 104 B 2 KB 5.08%
[254/254] Linking C executable zephyr/zephyr.elf
generated config file:
# # MCUboot-specific configuration options # CONFIG_MCUBOOT=y CONFIG_PM_PARTITION_SIZE_MCUBOOT=0xc000 CONFIG_PM_PARTITION_SIZE_MCUBOOT_SCRATCH=0x1e000 CONFIG_PM_PARTITION_SIZE_MCUBOOT_PAD=0x200 CONFIG_BOOT_USE_MBEDTLS=y # # MCUBoot settings # CONFIG_BOOT_SIGNATURE_TYPE_RSA=y CONFIG_BOOT_SIGNATURE_TYPE_RSA_LEN=2048 # CONFIG_BOOT_SIGNATURE_TYPE_ECDSA_P256 is not set # CONFIG_BOOT_SIGNATURE_TYPE_ED25519 is not set CONFIG_MCUBOOT_CLEANUP_ARM_CORE=y CONFIG_MBEDTLS_CFG_FILE="mcuboot-mbedtls-cfg.h" # CONFIG_BOOT_HW_KEY is not set # CONFIG_BOOT_VALIDATE_SLOT0 is not set # CONFIG_BOOT_UPGRADE_ONLY is not set CONFIG_BOOT_SWAP_USING_MOVE=y # CONFIG_BOOT_BOOTSTRAP is not set # CONFIG_BOOT_SWAP_SAVE_ENCTLV is not set # CONFIG_BOOT_ENCRYPT_RSA is not set # CONFIG_BOOT_ENCRYPT_EC256 is not set # CONFIG_BOOT_ENCRYPT_X25519 is not set CONFIG_BOOT_MAX_IMG_SECTORS=256 CONFIG_BOOT_ERASE_PROGRESSIVELY=y # CONFIG_MEASURED_BOOT is not set # CONFIG_BOOT_SHARE_DATA is not set # CONFIG_BOOT_WAIT_FOR_USB_DFU is not set # CONFIG_ZEPHYR_TRY_MASS_ERASE is not set # CONFIG_BOOT_USE_BENCH is not set # CONFIG_MCUBOOT_LOG_LEVEL_OFF is not set # CONFIG_MCUBOOT_LOG_LEVEL_ERR is not set # CONFIG_MCUBOOT_LOG_LEVEL_WRN is not set CONFIG_MCUBOOT_LOG_LEVEL_INF=y # CONFIG_MCUBOOT_LOG_LEVEL_DBG is not set CONFIG_MCUBOOT_LOG_LEVEL=3 CONFIG_MCUBOOT_LOG_THREAD_STACK_SIZE=768 CONFIG_MCUBOOT_SERIAL=y CONFIG_BOOT_SERIAL_UART=y # CONFIG_BOOT_SERIAL_CDC_ACM is not set CONFIG_BOOT_MAX_LINE_INPUT_LEN=512 CONFIG_BOOT_SERIAL_DETECT_PORT="GPIO_0" CONFIG_BOOT_SERIAL_DETECT_PIN=31 CONFIG_BOOT_SERIAL_DETECT_PIN_VAL=0 CONFIG_RECOVERY_UART_DEV_NAME="UART_0" # end of MCUBoot settings CONFIG_MCUBOOT_DEVICE_SETTINGS=y # # Zephyr configuration options # CONFIG_MULTITHREADING=y # CONFIG_LOG_IMMEDIATE is not set # CONFIG_LOG_PROCESS_THREAD is not set CONFIG_USB_DEVICE_PRODUCT="MCUBOOT" CONFIG_UPDATEABLE_IMAGE_NUMBER=1 # # Modules # # # Nordic nRF Connect # # CONFIG_NCS_SAMPLES_DEFAULTS is not set CONFIG_LOG_DEFAULT_LEVEL=3 # # Bootloader # # CONFIG_BUILD_S1_VARIANT is not set # CONFIG_SECURE_BOOT is not set CONFIG_PM_PARTITION_SIZE_PROVISION=0x1000 CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x7000 # CONFIG_SECURE_BOOT_CRYPTO is not set # # Secure Boot firmware validation # CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483 CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1 CONFIG_SB_VALIDATION_INFO_VERSION=2 CONFIG_SB_VALIDATION_METADATA_OFFSET=0 CONFIG_SB_VALIDATE_FW_SIGNATURE=y # end of Secure Boot firmware validation # end of Bootloader # # Bluetooth Low Energy # CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024 # end of Bluetooth Low Energy # # DFU # # CONFIG_DFU_TARGET is not set # end of DFU # CONFIG_ESB is not set # # Networking # # # Application protocols # # CONFIG_NRF_CLOUD is not set # CONFIG_DOWNLOAD_CLIENT is not set # CONFIG_AWS_IOT is not set # CONFIG_AWS_JOBS is not set # CONFIG_CLOUD_API is not set # CONFIG_CLOUD_PERSISTENT_SESSIONS is not set # # Self-Registration (Zi ZHu Ce) # # end of Self-Registration (Zi ZHu Ce) # CONFIG_ICAL_PARSER is not set # CONFIG_FTP_CLIENT is not set # end of Application protocols # end of Networking # # NFC # # CONFIG_NFC_NDEF is not set # CONFIG_NFC_NDEF_PARSER is not set # CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set # CONFIG_NFC_T2T_PARSER is not set # CONFIG_NFC_T4T_ISODEP is not set # CONFIG_NFC_T4T_APDU is not set # CONFIG_NFC_T4T_CC_FILE is not set # CONFIG_NFC_T4T_HL_PROCEDURE is not set # CONFIG_NFC_PLATFORM is not set # CONFIG_NFC_TNEP_TAG is not set # CONFIG_NFC_TNEP_POLLER is not set # end of NFC # CONFIG_PROFILER is not set # # SPM # # CONFIG_SPM is not set # CONFIG_IS_SPM is not set # end of SPM # CONFIG_FW_INFO is not set # CONFIG_PPI_TRACE is not set # CONFIG_CPU_LOAD is not set # # Nordic MPSL # CONFIG_MPSL_THREAD_COOP_PRIO=8 CONFIG_MPSL_SIGNAL_STACK_SIZE=1024 # CONFIG_MPSL_LOG_LEVEL_OFF is not set # CONFIG_MPSL_LOG_LEVEL_ERR is not set # CONFIG_MPSL_LOG_LEVEL_WRN is not set CONFIG_MPSL_LOG_LEVEL_INF=y # CONFIG_MPSL_LOG_LEVEL_DBG is not set CONFIG_MPSL_LOG_LEVEL=3 # end of Nordic MPSL # # Partition Manager # # # Zephyr subsystem configurations # # end of Zephyr subsystem configurations CONFIG_PM_SINGLE_IMAGE=y CONFIG_PM_EXTERNAL_FLASH=y CONFIG_PM_EXTERNAL_FLASH_DEV_NAME="MX25R64" CONFIG_PM_EXTERNAL_FLASH_SIZE=0x800000 CONFIG_PM_EXTERNAL_FLASH_BASE=0 # end of Partition Manager # CONFIG_ZIGBEE is not set # # Libraries # # # Binary libraries # # end of Binary libraries # # BSD Library for nrf91 # # end of BSD Library for nrf91 # CONFIG_ADP536X is not set # # AT Command driver # # end of AT Command driver # CONFIG_DISABLE_FLASH_PATCH is not set # CONFIG_LTE_LINK_CONTROL is not set # CONFIG_FPROTECT is not set CONFIG_FPROTECT_BLOCK_SIZE=0x1000 # # AT Host Library for nrf91 # # CONFIG_AT_HOST_LIBRARY is not set # end of AT Host Library for nrf91 # CONFIG_DK_LIBRARY is not set # CONFIG_AT_CMD_PARSER is not set # CONFIG_MODEM_INFO is not set # CONFIG_RESET_ON_FATAL_ERROR is not set # CONFIG_SMS is not set # CONFIG_SUPL_CLIENT_LIB is not set # end of Libraries # # Device Drivers # # CONFIG_HW_CC310 is not set # CONFIG_ETH_RTT is not set # CONFIG_SENSOR is not set # # GPS Drivers # # CONFIG_GPS_SIM is not set # end of GPS Drivers # CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y # CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_LOW_SWING is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_FULL_SWING is not set # end of Device Drivers # # External libraries # # end of External libraries # CONFIG_UNITY is not set # end of Nordic nRF Connect CONFIG_COMPONENT_LIB=y # CONFIG_PIEZO is not set # CONFIG_VIBEMOTOR is not set # CONFIG_ACCELEROMETER is not set # # Laird Connectivity Zephyr Components # # CONFIG_LCZ_QRTC is not set # CONFIG_LCZ_LED is not set CONFIG_DEFAULT_LED_ON_TIME_FOR_1_SECOND_BLINK=100 CONFIG_DEFAULT_LED_OFF_TIME_FOR_1_SECOND_BLINK=900 # CONFIG_LCZ_DNS is not set # CONFIG_LCZ_POWER is not set # end of Laird Connectivity Zephyr Components # # Laird Connectivity Zephyr Utilities # # CONFIG_JSON_LOG_ENABLED is not set # end of Laird Connectivity Zephyr Utilities # # MCUboot # CONFIG_BOOT_SIGNATURE_KEY_FILE="root-rsa-2048.pem" CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4 # end of MCUboot # # Nordic nrfxlib # # CONFIG_NFC_T2T_NRFXLIB is not set # CONFIG_NFC_T4T_NRFXLIB is not set # CONFIG_MPSL is not set # # Crypto libraries for nRF5x SOCs. # # CONFIG_NRF_OBERON is not set # CONFIG_NRF_CC310_BL is not set # CONFIG_NRF_CC310_PLATFORM is not set # end of Crypto libraries for nRF5x SOCs. # # Nordic Security # # CONFIG_NORDIC_SECURITY_BACKEND is not set # CONFIG_MBEDTLS_ENABLE_HEAP is not set CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=1500 # end of Nordic Security # end of Nordic nrfxlib # # Optional modules. Make sure they're installed, via the project manifest. # # CONFIG_CANOPENNODE is not set # CONFIG_CIVETWEB is not set CONFIG_HAS_CMSIS_CORE=y CONFIG_HAS_CMSIS_CORE_M=y # CONFIG_LIBMETAL is not set # CONFIG_HAS_SEMTECH_LORAMAC is not set # CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set CONFIG_MBEDTLS=y CONFIG_MBEDTLS_BUILTIN=y # CONFIG_MBEDTLS_LIBRARY is not set # CONFIG_MBEDTLS_DEBUG is not set # CONFIG_MBEDTLS_TEST is not set CONFIG_APP_LINK_WITH_MBEDTLS=y # CONFIG_HAS_MEC_HAL is not set CONFIG_HAS_NORDIC_DRIVERS=y # # Nordic drivers # # CONFIG_NRF_802154_RADIO_DRIVER is not set # end of Nordic drivers CONFIG_HAS_NRFX=y # # nrfx drivers # # CONFIG_NRFX_CLOCK is not set # CONFIG_NRFX_COMP is not set # CONFIG_NRFX_EGU is not set # CONFIG_NRFX_EGU0 is not set # CONFIG_NRFX_EGU1 is not set # CONFIG_NRFX_EGU2 is not set # CONFIG_NRFX_EGU3 is not set # CONFIG_NRFX_EGU4 is not set # CONFIG_NRFX_EGU5 is not set # CONFIG_NRFX_GPIOTE is not set # CONFIG_NRFX_I2S is not set # CONFIG_NRFX_LPCOMP is not set # CONFIG_NRFX_NFCT is not set CONFIG_NRFX_NVMC=y # CONFIG_NRFX_PDM is not set # CONFIG_NRFX_POWER is not set # CONFIG_NRFX_PPI is not set # CONFIG_NRFX_PWM is not set # CONFIG_NRFX_PWM0 is not set # CONFIG_NRFX_PWM1 is not set # CONFIG_NRFX_PWM2 is not set # CONFIG_NRFX_PWM3 is not set # CONFIG_NRFX_QDEC is not set CONFIG_NRFX_QSPI=y # CONFIG_NRFX_RNG is not set # CONFIG_NRFX_RTC is not set # CONFIG_NRFX_RTC0 is not set # CONFIG_NRFX_RTC1 is not set # CONFIG_NRFX_RTC2 is not set # CONFIG_NRFX_SAADC is not set # CONFIG_NRFX_SPI is not set # CONFIG_NRFX_SPI0 is not set # CONFIG_NRFX_SPI1 is not set # CONFIG_NRFX_SPI2 is not set # CONFIG_NRFX_SPIM is not set # CONFIG_NRFX_SPIM0 is not set # CONFIG_NRFX_SPIM1 is not set # CONFIG_NRFX_SPIM2 is not set # CONFIG_NRFX_SPIM3 is not set # CONFIG_NRFX_SPIS is not set # CONFIG_NRFX_SPIS0 is not set # CONFIG_NRFX_SPIS1 is not set # CONFIG_NRFX_SPIS2 is not set # CONFIG_NRFX_SYSTICK is not set # CONFIG_NRFX_TEMP is not set # CONFIG_NRFX_TIMER is not set # CONFIG_NRFX_TIMER0 is not set # CONFIG_NRFX_TIMER1 is not set # CONFIG_NRFX_TIMER2 is not set # CONFIG_NRFX_TIMER3 is not set # CONFIG_NRFX_TIMER4 is not set # CONFIG_NRFX_TWI is not set # CONFIG_NRFX_TWI0 is not set # CONFIG_NRFX_TWI1 is not set # CONFIG_NRFX_TWIM is not set # CONFIG_NRFX_TWIM0 is not set # CONFIG_NRFX_TWIM1 is not set # CONFIG_NRFX_TWIS is not set # CONFIG_NRFX_TWIS0 is not set # CONFIG_NRFX_TWIS1 is not set # CONFIG_NRFX_UART is not set # CONFIG_NRFX_UART0 is not set # CONFIG_NRFX_UARTE is not set # CONFIG_NRFX_UARTE0 is not set # CONFIG_NRFX_UARTE1 is not set # CONFIG_NRFX_USBD is not set # CONFIG_NRFX_WDT is not set # CONFIG_NRFX_WDT0 is not set # CONFIG_NRFX_PRS is not set # CONFIG_NRFX_PRS_BOX_0 is not set # CONFIG_NRFX_PRS_BOX_1 is not set # CONFIG_NRFX_PRS_BOX_2 is not set # CONFIG_NRFX_PRS_BOX_3 is not set # CONFIG_NRFX_PRS_BOX_4 is not set # end of nrfx drivers # CONFIG_OPENAMP is not set # CONFIG_MIPI_SYST_LIB is not set CONFIG_TINYCBOR=y # CONFIG_CBOR_ENCODER_NO_CHECK_USER is not set CONFIG_CBOR_PARSER_MAX_RECURSIONS=1024 # CONFIG_CBOR_PARSER_NO_STRICT_CHECKS is not set # CONFIG_CBOR_FLOATING_POINT is not set # CONFIG_CBOR_HALF_FLOAT_TYPE is not set CONFIG_CBOR_WITHOUT_OPEN_MEMSTREAM=y # CONFIG_CBOR_PRETTY_PRINTING is not set # CONFIG_TINYCRYPT is not set # end of Modules # CONFIG_SPI is not set # CONFIG_TEST_RANDOM_GENERATOR is not set CONFIG_NET_CONFIG_IEEE802154_DEV_NAME="" # CONFIG_I2C is not set # CONFIG_MODEM is not set CONFIG_UART_INTERRUPT_DRIVEN=y CONFIG_GPIO_NRF_P1=y # CONFIG_UART_1_NRF_FLOW_CONTROL is not set CONFIG_BOARD="pinnacle_100_dvk" CONFIG_SOC="nRF52840_QIAA" CONFIG_SOC_SERIES="nrf52" CONFIG_NUM_IRQS=48 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768 # CONFIG_WATCHDOG is not set # CONFIG_UART_NS16550 is not set CONFIG_GPIO=y # CONFIG_SYS_POWER_MANAGEMENT is not set CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_1=y # CONFIG_DEVICE_POWER_MANAGEMENT is not set CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y # CONFIG_CORTEX_M_SYSTICK is not set CONFIG_CLOCK_CONTROL=y CONFIG_NRF_RTC_TIMER=y CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768 CONFIG_BUILD_OUTPUT_HEX=y # CONFIG_FPU is not set CONFIG_TEXT_SECTION_OFFSET=0 CONFIG_FLASH_SIZE=1024 CONFIG_FLASH_BASE_ADDRESS=0x0 CONFIG_SRAM_SIZE=256 CONFIG_SRAM_BASE_ADDRESS=0x20000000 # CONFIG_GPIO_MCUX is not set # CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set CONFIG_HEAP_MEM_POOL_SIZE=0 CONFIG_BOARD_PINNACLE_100_DVK=y # # Board Options # CONFIG_BOARD_ENABLE_DCDC=y # end of Board Options # CONFIG_SOC_SERIES_BEETLE is not set # CONFIG_SOC_SERIES_MPS2 is not set # CONFIG_SOC_SERIES_MUSCA is not set # CONFIG_SOC_SERIES_MUSCA_B1 is not set # CONFIG_SOC_SERIES_SAM3X is not set # CONFIG_SOC_SERIES_SAM4E is not set # CONFIG_SOC_SERIES_SAM4S is not set # CONFIG_SOC_SERIES_SAME70 is not set # CONFIG_SOC_SERIES_SAMV71 is not set # CONFIG_SOC_SERIES_SAMD20 is not set # CONFIG_SOC_SERIES_SAMD21 is not set # CONFIG_SOC_SERIES_SAMD51 is not set # CONFIG_SOC_SERIES_SAME51 is not set # CONFIG_SOC_SERIES_SAME53 is not set # CONFIG_SOC_SERIES_SAME54 is not set # CONFIG_SOC_SERIES_SAMR21 is not set # CONFIG_SOC_SERIES_VALKYRIE is not set # CONFIG_SOC_SERIES_VIPER is not set # CONFIG_SOC_SERIES_PSOC62 is not set # CONFIG_SOC_SERIES_XMC_4XXX is not set # CONFIG_SOC_SERIES_MEC1501X is not set # CONFIG_SOC_SERIES_MEC1701X is not set # CONFIG_SOC_SERIES_NRF51X is not set CONFIG_SOC_SERIES_NRF52X=y # CONFIG_SOC_SERIES_NRF53X is not set # CONFIG_SOC_SERIES_NRF91X is not set # CONFIG_SOC_SERIES_IMX_6X_M4 is not set # CONFIG_SOC_SERIES_IMX7_M4 is not set # CONFIG_SOC_SERIES_IMX_RT is not set # CONFIG_SOC_SERIES_KINETIS_K2X is not set # CONFIG_SOC_SERIES_KINETIS_K6X is not set # CONFIG_SOC_SERIES_KINETIS_K8X is not set # CONFIG_SOC_SERIES_KINETIS_KE1XF is not set # CONFIG_SOC_SERIES_KINETIS_KL2X is not set # CONFIG_SOC_SERIES_KINETIS_KV5X is not set # CONFIG_SOC_SERIES_KINETIS_KWX is not set # CONFIG_SOC_SERIES_LPC54XXX is not set # CONFIG_SOC_SERIES_LPC55XXX is not set # CONFIG_SOC_QEMU_CORTEX_A53 is not set # CONFIG_SOC_SERIES_EFM32GG11B is not set # CONFIG_SOC_SERIES_EFM32HG is not set # CONFIG_SOC_SERIES_EFM32JG12B is not set # CONFIG_SOC_SERIES_EFM32PG12B is not set # CONFIG_SOC_SERIES_EFM32WG is not set # CONFIG_SOC_SERIES_EFR32BG13P is not set # CONFIG_SOC_SERIES_EFR32FG1P is not set # CONFIG_SOC_SERIES_EFR32MG12P is not set # CONFIG_SOC_SERIES_STM32F0X is not set # CONFIG_SOC_SERIES_STM32F1X is not set # CONFIG_SOC_SERIES_STM32F2X is not set # CONFIG_SOC_SERIES_STM32F3X is not set # CONFIG_SOC_SERIES_STM32F4X is not set # CONFIG_SOC_SERIES_STM32F7X is not set # CONFIG_SOC_SERIES_STM32G0X is not set # CONFIG_SOC_SERIES_STM32G4X is not set # CONFIG_SOC_SERIES_STM32H7X is not set # CONFIG_SOC_SERIES_STM32L0X is not set # CONFIG_SOC_SERIES_STM32L1X is not set # CONFIG_SOC_SERIES_STM32L4X is not set # CONFIG_SOC_SERIES_STM32L5X is not set # CONFIG_SOC_SERIES_STM32MP1X is not set # CONFIG_SOC_SERIES_STM32WBX is not set # CONFIG_SOC_TI_LM3S6965 is not set # CONFIG_SOC_SERIES_CC13X2_CC26X2 is not set # CONFIG_SOC_SERIES_CC32XX is not set # CONFIG_SOC_SERIES_MSP432P4XX is not set # CONFIG_SOC_XILINX_ZYNQMP_RPU is not set # # Hardware Configuration # CONFIG_CPU_HAS_ARM_MPU=y CONFIG_SOC_FAMILY="nordic_nrf" CONFIG_SOC_FAMILY_NRF=y CONFIG_HAS_HW_NRF_ACL=y CONFIG_HAS_HW_NRF_CC310=y CONFIG_HAS_HW_NRF_CCM=y CONFIG_HAS_HW_NRF_CLOCK=y CONFIG_HAS_HW_NRF_COMP=y CONFIG_HAS_HW_NRF_ECB=y CONFIG_HAS_HW_NRF_EGU0=y CONFIG_HAS_HW_NRF_EGU1=y CONFIG_HAS_HW_NRF_EGU2=y CONFIG_HAS_HW_NRF_EGU3=y CONFIG_HAS_HW_NRF_EGU4=y CONFIG_HAS_HW_NRF_EGU5=y CONFIG_HAS_HW_NRF_GPIO0=y CONFIG_HAS_HW_NRF_GPIO1=y CONFIG_HAS_HW_NRF_GPIOTE=y CONFIG_HAS_HW_NRF_I2S=y CONFIG_HAS_HW_NRF_LPCOMP=y CONFIG_HAS_HW_NRF_MWU=y CONFIG_HAS_HW_NRF_NFCT=y CONFIG_HAS_HW_NRF_NVMC_PE=y CONFIG_HAS_HW_NRF_PDM=y CONFIG_HAS_HW_NRF_POWER=y CONFIG_HAS_HW_NRF_PPI=y CONFIG_HAS_HW_NRF_PWM0=y CONFIG_HAS_HW_NRF_PWM1=y CONFIG_HAS_HW_NRF_PWM2=y CONFIG_HAS_HW_NRF_PWM3=y CONFIG_HAS_HW_NRF_QDEC=y CONFIG_HAS_HW_NRF_QSPI=y CONFIG_HAS_HW_NRF_RADIO_BLE_CODED=y CONFIG_HAS_HW_NRF_RADIO_IEEE802154=y CONFIG_HAS_HW_NRF_RNG=y CONFIG_HAS_HW_NRF_RTC0=y CONFIG_HAS_HW_NRF_RTC1=y CONFIG_HAS_HW_NRF_RTC2=y CONFIG_HAS_HW_NRF_SAADC=y CONFIG_HAS_HW_NRF_SPI0=y CONFIG_HAS_HW_NRF_SPI1=y CONFIG_HAS_HW_NRF_SPI2=y CONFIG_HAS_HW_NRF_SPIM0=y CONFIG_HAS_HW_NRF_SPIM1=y CONFIG_HAS_HW_NRF_SPIM2=y CONFIG_HAS_HW_NRF_SPIM3=y CONFIG_HAS_HW_NRF_SPIS0=y CONFIG_HAS_HW_NRF_SPIS1=y CONFIG_HAS_HW_NRF_SPIS2=y CONFIG_HAS_HW_NRF_SWI0=y CONFIG_HAS_HW_NRF_SWI1=y CONFIG_HAS_HW_NRF_SWI2=y CONFIG_HAS_HW_NRF_SWI3=y CONFIG_HAS_HW_NRF_SWI4=y CONFIG_HAS_HW_NRF_SWI5=y CONFIG_HAS_HW_NRF_TEMP=y CONFIG_HAS_HW_NRF_TIMER0=y CONFIG_HAS_HW_NRF_TIMER1=y CONFIG_HAS_HW_NRF_TIMER2=y CONFIG_HAS_HW_NRF_TIMER3=y CONFIG_HAS_HW_NRF_TIMER4=y CONFIG_HAS_HW_NRF_TWI0=y CONFIG_HAS_HW_NRF_TWI1=y CONFIG_HAS_HW_NRF_TWIM0=y CONFIG_HAS_HW_NRF_TWIM1=y CONFIG_HAS_HW_NRF_TWIS0=y CONFIG_HAS_HW_NRF_TWIS1=y CONFIG_HAS_HW_NRF_UART0=y CONFIG_HAS_HW_NRF_UARTE0=y CONFIG_HAS_HW_NRF_UARTE1=y CONFIG_HAS_HW_NRF_USBD=y CONFIG_HAS_HW_NRF_WDT=y CONFIG_SOC_NRF52840=y # CONFIG_SOC_NRF52810_QFAA is not set # CONFIG_SOC_NRF52811_QFAA is not set # CONFIG_SOC_NRF52820_QDAA is not set # CONFIG_SOC_NRF52832_CIAA is not set # CONFIG_SOC_NRF52832_QFAA is not set # CONFIG_SOC_NRF52832_QFAB is not set # CONFIG_SOC_NRF52833_QIAA is not set CONFIG_SOC_NRF52840_QIAA=y CONFIG_SOC_DCDC_NRF52X=y # CONFIG_NFCT_PINS_AS_GPIOS is not set CONFIG_GPIO_AS_PINRESET=y CONFIG_NRF_ENABLE_ICACHE=y # CONFIG_SOC_LOG_LEVEL_OFF is not set # CONFIG_SOC_LOG_LEVEL_ERR is not set # CONFIG_SOC_LOG_LEVEL_WRN is not set CONFIG_SOC_LOG_LEVEL_INF=y # CONFIG_SOC_LOG_LEVEL_DBG is not set CONFIG_SOC_LOG_LEVEL=3 # end of Hardware Configuration CONFIG_SOC_COMPATIBLE_NRF=y CONFIG_SOC_COMPATIBLE_NRF52X=y # # ARM Options # CONFIG_ARCH="arm" CONFIG_CPU_CORTEX=y CONFIG_CPU_CORTEX_M=y CONFIG_ISA_THUMB2=y CONFIG_ASSEMBLER_ISA_THUMB2=y CONFIG_COMPILER_ISA_THUMB2=y CONFIG_STACK_ALIGN_DOUBLE_WORD=y # CONFIG_RUNTIME_NMI is not set CONFIG_PLATFORM_SPECIFIC_INIT=y CONFIG_FAULT_DUMP=2 CONFIG_CPU_CORTEX_M4=y CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y CONFIG_CPU_CORTEX_M_HAS_DWT=y CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y CONFIG_CPU_CORTEX_M_HAS_VTOR=y CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y CONFIG_ARMV7_M_ARMV8_M_FP=y CONFIG_XIP=y # # ARM Cortex-M0/M0+/M3/M4/M7/M23/M33 options # CONFIG_GEN_ISR_TABLES=y # CONFIG_ZERO_LATENCY_IRQS is not set # end of ARM Cortex-M0/M0+/M3/M4/M7/M23/M33 options CONFIG_ARM_MPU=y CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32 # CONFIG_MPU_STACK_GUARD is not set CONFIG_MPU_ALLOW_FLASH_WRITE=y # CONFIG_CUSTOM_SECTION_ALIGN is not set CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32 CONFIG_GEN_IRQ_VECTOR_TABLE=y CONFIG_MAIN_STACK_SIZE=10240 CONFIG_IDLE_STACK_SIZE=320 CONFIG_ISR_STACK_SIZE=2048 CONFIG_TEST_EXTRA_STACKSIZE=0 # end of ARM Options CONFIG_ARM=y CONFIG_ARCH_IS_SET=y # # General Architecture Options # # CONFIG_ARCH_LOG_LEVEL_OFF is not set # CONFIG_ARCH_LOG_LEVEL_ERR is not set # CONFIG_ARCH_LOG_LEVEL_WRN is not set CONFIG_ARCH_LOG_LEVEL_INF=y # CONFIG_ARCH_LOG_LEVEL_DBG is not set CONFIG_ARCH_LOG_LEVEL=3 # CONFIG_MPU_LOG_LEVEL_OFF is not set # CONFIG_MPU_LOG_LEVEL_ERR is not set # CONFIG_MPU_LOG_LEVEL_WRN is not set CONFIG_MPU_LOG_LEVEL_INF=y # CONFIG_MPU_LOG_LEVEL_DBG is not set CONFIG_MPU_LOG_LEVEL=3 # CONFIG_HW_STACK_PROTECTION is not set # CONFIG_USERSPACE is not set CONFIG_PRIVILEGED_STACK_SIZE=1024 CONFIG_KOBJECT_TEXT_AREA=256 CONFIG_GEN_PRIV_STACKS=y # CONFIG_STACK_GROWS_UP is not set # # Interrupt Configuration # # CONFIG_DYNAMIC_INTERRUPTS is not set CONFIG_GEN_SW_ISR_TABLE=y CONFIG_ARCH_SW_ISR_TABLE_ALIGN=0 CONFIG_GEN_IRQ_START_VECTOR=0 # end of Interrupt Configuration # end of General Architecture Options CONFIG_ARCH_HAS_STACK_PROTECTION=y CONFIG_ARCH_HAS_USERSPACE=y CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y CONFIG_ARCH_HAS_THREAD_ABORT=y CONFIG_CPU_HAS_FPU=y CONFIG_CPU_HAS_MPU=y CONFIG_MEMORY_PROTECTION=y CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT=y # # Floating Point Options # # end of Floating Point Options # # General Kernel Options # # CONFIG_KERNEL_LOG_LEVEL_OFF is not set # CONFIG_KERNEL_LOG_LEVEL_ERR is not set # CONFIG_KERNEL_LOG_LEVEL_WRN is not set CONFIG_KERNEL_LOG_LEVEL_INF=y # CONFIG_KERNEL_LOG_LEVEL_DBG is not set CONFIG_KERNEL_LOG_LEVEL=3 CONFIG_NUM_COOP_PRIORITIES=16 CONFIG_NUM_PREEMPT_PRIORITIES=15 CONFIG_MAIN_THREAD_PRIORITY=0 CONFIG_COOP_ENABLED=y CONFIG_PREEMPT_ENABLED=y CONFIG_PRIORITY_CEILING=0 CONFIG_NUM_METAIRQ_PRIORITIES=0 # CONFIG_SCHED_DEADLINE is not set # CONFIG_SCHED_CPU_MASK is not set CONFIG_THREAD_STACK_INFO=y # CONFIG_THREAD_CUSTOM_DATA is not set CONFIG_ERRNO=y CONFIG_SCHED_DUMB=y # CONFIG_SCHED_SCALABLE is not set # CONFIG_SCHED_MULTIQ is not set # CONFIG_WAITQ_SCALABLE is not set CONFIG_WAITQ_DUMB=y # # Kernel Debugging and Metrics # # CONFIG_INIT_STACKS is not set # CONFIG_KERNEL_DEBUG is not set CONFIG_BOOT_BANNER=y CONFIG_BOOT_DELAY=0 # CONFIG_EXECUTION_BENCHMARKING is not set # CONFIG_THREAD_MONITOR is not set # CONFIG_THREAD_NAME is not set # end of Kernel Debugging and Metrics # # Work Queue Options # CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1 # end of Work Queue Options # # Atomic Operations # CONFIG_ATOMIC_OPERATIONS_BUILTIN=y # end of Atomic Operations # # Timer API Options # CONFIG_TIMESLICING=y CONFIG_TIMESLICE_SIZE=0 CONFIG_TIMESLICE_PRIORITY=0 # CONFIG_POLL is not set # end of Timer API Options # # Other Kernel Object Options # CONFIG_NUM_MBOX_ASYNC_MSGS=10 CONFIG_NUM_PIPE_ASYNC_MSGS=10 CONFIG_MEM_POOL_HEAP_BACKEND=y # end of Other Kernel Object Options CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y CONFIG_SWAP_NONATOMIC=y CONFIG_SYS_CLOCK_EXISTS=y # CONFIG_LEGACY_TIMEOUT_API is not set CONFIG_TIMEOUT_64BIT=y # # Initialization Priorities # CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30 CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40 CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50 CONFIG_APPLICATION_INIT_PRIORITY=90 # end of Initialization Priorities # # Security Options # # end of Security Options # # SMP Options # CONFIG_MP_NUM_CPUS=1 # end of SMP Options CONFIG_TICKLESS_IDLE=y CONFIG_TICKLESS_IDLE_THRESH=3 CONFIG_TICKLESS_KERNEL=y # end of General Kernel Options CONFIG_HAS_DTS=y CONFIG_HAS_DTS_GPIO=y # # Device Drivers # # CONFIG_IEEE802154 is not set CONFIG_CONSOLE=y CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128 CONFIG_CONSOLE_HAS_DRIVER=y # CONFIG_UART_CONSOLE is not set # CONFIG_USB_UART_CONSOLE is not set # CONFIG_RAM_CONSOLE is not set CONFIG_RTT_CONSOLE=y CONFIG_RTT_TX_RETRY_CNT=2 CONFIG_RTT_TX_RETRY_DELAY_MS=2 # CONFIG_RTT_TX_RETRY_IN_INTERRUPT is not set # CONFIG_IPM_CONSOLE_SENDER is not set # CONFIG_IPM_CONSOLE_RECEIVER is not set # CONFIG_UART_PIPE is not set # CONFIG_UART_MCUMGR is not set # CONFIG_SEMIHOST_CONSOLE is not set # CONFIG_UART_CONSOLE_LOG_LEVEL_OFF is not set # CONFIG_UART_CONSOLE_LOG_LEVEL_ERR is not set # CONFIG_UART_CONSOLE_LOG_LEVEL_WRN is not set CONFIG_UART_CONSOLE_LOG_LEVEL_INF=y # CONFIG_UART_CONSOLE_LOG_LEVEL_DBG is not set CONFIG_UART_CONSOLE_LOG_LEVEL=3 # CONFIG_GSM_MUX is not set CONFIG_UART_MUX_RX_STACK_SIZE=512 CONFIG_UART_MUX_RX_PRIORITY=7 # CONFIG_UART_MUX_LOG_LEVEL_OFF is not set # CONFIG_UART_MUX_LOG_LEVEL_ERR is not set # CONFIG_UART_MUX_LOG_LEVEL_WRN is not set CONFIG_UART_MUX_LOG_LEVEL_INF=y # CONFIG_UART_MUX_LOG_LEVEL_DBG is not set CONFIG_UART_MUX_LOG_LEVEL=3 CONFIG_HAS_SEGGER_RTT=y CONFIG_USE_SEGGER_RTT=y CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS=3 CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS=3 CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=1024 CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN=16 CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE=64 CONFIG_SEGGER_RTT_MODE_NO_BLOCK_SKIP=y # CONFIG_SEGGER_RTT_MODE_NO_BLOCK_TRIM is not set # CONFIG_SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL is not set CONFIG_SEGGER_RTT_MODE=0 # CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP is not set # CONFIG_NET_LOOPBACK is not set CONFIG_SERIAL=y # # Capabilities # CONFIG_SERIAL_HAS_DRIVER=y CONFIG_SERIAL_SUPPORT_ASYNC=y CONFIG_SERIAL_SUPPORT_INTERRUPT=y # CONFIG_UART_ASYNC_API is not set # CONFIG_UART_LINE_CTRL is not set # CONFIG_UART_DRV_CMD is not set # # Serial Drivers # # CONFIG_UART_NSIM is not set CONFIG_UART_NRFX=y CONFIG_UART_0_NRF_UART=y CONFIG_UART_0_INTERRUPT_DRIVEN=y # CONFIG_UART_0_NRF_PARITY_BIT is not set # CONFIG_UART_0_NRF_FLOW_CONTROL is not set CONFIG_UART_1_NRF_UARTE=y CONFIG_UART_1_INTERRUPT_DRIVEN=y # CONFIG_UART_1_NRF_PARITY_BIT is not set CONFIG_UART_1_NRF_TX_BUFFER_SIZE=32 CONFIG_NRF_UART_PERIPHERAL=y CONFIG_NRF_UARTE_PERIPHERAL=y # CONFIG_UART_ALTERA_JTAG is not set # CONFIG_UART_PL011 is not set # CONFIG_UART_RTT is not set # # Interrupt Controllers # # CONFIG_SWERV_PIC is not set # CONFIG_MULTI_LEVEL_INTERRUPTS is not set # end of Interrupt Controllers # # Timer Drivers # CONFIG_SYSTEM_CLOCK_DISABLE=y # CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set # CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0 CONFIG_TICKLESS_CAPABLE=y # end of Timer Drivers # CONFIG_ENTROPY_GENERATOR is not set # CONFIG_GPIO_LOG_LEVEL_OFF is not set # CONFIG_GPIO_LOG_LEVEL_ERR is not set # CONFIG_GPIO_LOG_LEVEL_WRN is not set CONFIG_GPIO_LOG_LEVEL_INF=y # CONFIG_GPIO_LOG_LEVEL_DBG is not set CONFIG_GPIO_LOG_LEVEL=3 # CONFIG_GPIO_SHELL is not set # CONFIG_GPIO_DW is not set CONFIG_GPIO_NRFX=y CONFIG_GPIO_NRF_INIT_PRIORITY=40 CONFIG_GPIO_NRF_P0=y # CONFIG_GPIO_INTEL_APL is not set # CONFIG_SHARED_IRQ is not set # CONFIG_I2S is not set # CONFIG_PWM is not set # CONFIG_PINMUX is not set # CONFIG_ADC is not set # CONFIG_DAC is not set # CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF is not set # CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR is not set # CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN is not set CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF=y # CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG is not set CONFIG_CLOCK_CONTROL_LOG_LEVEL=3 CONFIG_CLOCK_CONTROL_NRF=y # CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM is not set # CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM=y # CONFIG_PTP_CLOCK is not set # CONFIG_IPM is not set CONFIG_FLASH_HAS_DRIVER_ENABLED=y CONFIG_FLASH_HAS_PAGE_LAYOUT=y CONFIG_FLASH=y # CONFIG_FLASH_LOG_LEVEL_OFF is not set # CONFIG_FLASH_LOG_LEVEL_ERR is not set # CONFIG_FLASH_LOG_LEVEL_WRN is not set CONFIG_FLASH_LOG_LEVEL_INF=y # CONFIG_FLASH_LOG_LEVEL_DBG is not set CONFIG_FLASH_LOG_LEVEL=3 CONFIG_FLASH_PAGE_LAYOUT=y CONFIG_SOC_FLASH_NRF=y # CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE is not set # CONFIG_SOC_FLASH_NRF_UICR is not set # CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS is not set # CONFIG_FLASH_SIMULATOR is not set CONFIG_NORDIC_QSPI_NOR=y CONFIG_NORDIC_QSPI_NOR_QE_BIT=6 CONFIG_NORDIC_QSPI_NOR_INIT_PRIORITY=80 CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096 CONFIG_NORDIC_QSPI_NOR_FLASH_ALLOW_STACK_USAGE_FOR_DATA_IN_FLASH=y # CONFIG_COUNTER is not set # CONFIG_DMA is not set # CONFIG_USB is not set # CONFIG_CRYPTO is not set # CONFIG_DISPLAY is not set # CONFIG_LED_STRIP is not set # CONFIG_WIFI is not set # CONFIG_LED is not set # CONFIG_CAN is not set # CONFIG_AUDIO is not set # CONFIG_NEURAL_NET_ACCEL is not set # CONFIG_HWINFO is not set # CONFIG_ESPI is not set # CONFIG_PS2 is not set # CONFIG_KSCAN is not set # CONFIG_VIDEO is not set # CONFIG_EEPROM is not set # CONFIG_PECI is not set # CONFIG_PECI_INTERRUPT_DRIVEN is not set # end of Device Drivers # # C Library # CONFIG_MINIMAL_LIBC=y # CONFIG_NEWLIB_LIBC is not set # CONFIG_EXTERNAL_LIBC is not set CONFIG_HAS_NEWLIB_LIBC_NANO=y CONFIG_MINIMAL_LIBC_MALLOC=y CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE=0 CONFIG_MINIMAL_LIBC_CALLOC=y CONFIG_MINIMAL_LIBC_REALLOCARRAY=y # CONFIG_MINIMAL_LIBC_LL_PRINTF is not set CONFIG_STDOUT_CONSOLE=y # end of C Library # # Additional libraries # # CONFIG_FNMATCH is not set # CONFIG_LVGL is not set # # OS Support Library # # CONFIG_JSON_LIBRARY is not set # CONFIG_RING_BUFFER is not set CONFIG_BASE64=y # CONFIG_SYS_HEAP_VALIDATE is not set CONFIG_SYS_HEAP_ALLOC_LOOPS=3 # end of OS Support Library CONFIG_POSIX_MAX_FDS=4 # CONFIG_POSIX_API is not set # CONFIG_PTHREAD_IPC is not set # CONFIG_POSIX_CLOCK is not set CONFIG_MAX_TIMER_COUNT=5 # CONFIG_POSIX_MQUEUE is not set # CONFIG_EVENTFD is not set # CONFIG_UPDATEHUB is not set # CONFIG_UPDATEHUB_LOG_LEVEL_OFF is not set # CONFIG_UPDATEHUB_LOG_LEVEL_ERR is not set # CONFIG_UPDATEHUB_LOG_LEVEL_WRN is not set CONFIG_UPDATEHUB_LOG_LEVEL_INF=y # CONFIG_UPDATEHUB_LOG_LEVEL_DBG is not set CONFIG_UPDATEHUB_LOG_LEVEL=3 # CONFIG_OPENAMP_RSC_TABLE is not set # end of Additional libraries # CONFIG_BT is not set # CONFIG_CONSOLE_SUBSYS is not set # CONFIG_CPLUSPLUS is not set # # System Monitoring Options # # CONFIG_BOOT_TIME_MEASUREMENT is not set # CONFIG_STATS is not set # end of System Monitoring Options # # Debugging Options # CONFIG_DEBUG=y # CONFIG_STACK_USAGE is not set # CONFIG_STACK_SENTINEL is not set CONFIG_PRINTK=y CONFIG_EARLY_CONSOLE=y # CONFIG_ASSERT is not set # CONFIG_FORCE_NO_ASSERT is not set CONFIG_ASSERT_VERBOSE=y # CONFIG_ASSERT_NO_FILE_INFO is not set # CONFIG_ASSERT_NO_COND_INFO is not set # CONFIG_ASSERT_NO_MSG_INFO is not set # CONFIG_OBJECT_TRACING is not set # CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_OPENOCD_SUPPORT is not set # end of Debugging Options # CONFIG_THREAD_ANALYZER is not set # CONFIG_DISK_ACCESS is not set # # File Systems # # CONFIG_FILE_SYSTEM is not set # CONFIG_FCB is not set # CONFIG_NVS is not set # end of File Systems CONFIG_LOG=y # CONFIG_LOG_MINIMAL is not set # CONFIG_LOG_RUNTIME_FILTERING is not set CONFIG_LOG_OVERRIDE_LEVEL=0 CONFIG_LOG_MAX_LEVEL=4 # CONFIG_LOG_MIPI_SYST_ENABLE is not set # # Prepend log message with function name # # CONFIG_LOG_FUNC_NAME_PREFIX_ERR is not set # CONFIG_LOG_FUNC_NAME_PREFIX_WRN is not set # CONFIG_LOG_FUNC_NAME_PREFIX_INF is not set CONFIG_LOG_FUNC_NAME_PREFIX_DBG=y # end of Prepend log message with function name CONFIG_LOG_PRINTK=y CONFIG_LOG_PRINTK_MAX_STRING_LENGTH=128 # CONFIG_LOG_ENABLE_FANCY_OUTPUT_FORMATTING is not set CONFIG_LOG_MODE_OVERFLOW=y # CONFIG_LOG_MODE_NO_OVERFLOW is not set # CONFIG_LOG_BLOCK_IN_THREAD is not set CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD=10 CONFIG_LOG_BUFFER_SIZE=1024 CONFIG_LOG_DETECT_MISSED_STRDUP=y CONFIG_LOG_STRDUP_MAX_STRING=32 CONFIG_LOG_STRDUP_BUF_COUNT=4 # CONFIG_LOG_STRDUP_POOL_PROFILING is not set CONFIG_LOG_DOMAIN_ID=0 # CONFIG_LOG_FRONTEND is not set CONFIG_LOG_BACKEND_RTT=y # CONFIG_LOG_BACKEND_RTT_MODE_DROP is not set CONFIG_LOG_BACKEND_RTT_MODE_BLOCK=y CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE=16 CONFIG_LOG_BACKEND_RTT_RETRY_CNT=4 CONFIG_LOG_BACKEND_RTT_RETRY_DELAY_MS=5 CONFIG_LOG_BACKEND_RTT_BUFFER=0 CONFIG_LOG_BACKEND_RTT_FORCE_PRINTK=y # CONFIG_LOG_BACKEND_RB is not set CONFIG_LOG_BACKEND_SHOW_COLOR=y CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP=y # # Management # # CONFIG_MCUMGR_SMP_BT is not set # CONFIG_MCUMGR_SMP_SHELL is not set # CONFIG_MCUMGR_SMP_UART is not set # CONFIG_MCUMGR is not set # CONFIG_MCUMGR_SMP_UDP is not set # end of Management # # Networking # # CONFIG_NET_BUF is not set # CONFIG_NETWORKING is not set # end of Networking # CONFIG_SHELL is not set # CONFIG_IMG_MANAGER is not set # # Random subsystem # # end of Random subsystem # # Storage # CONFIG_FLASH_MAP=y # CONFIG_FLASH_MAP_CUSTOM is not set # CONFIG_STREAM_FLASH is not set # end of Storage # CONFIG_SETTINGS is not set # # Testing # # CONFIG_ZTEST is not set # CONFIG_ZTEST_MOCKING is not set # CONFIG_TEST is not set # CONFIG_TEST_SHELL is not set # CONFIG_TEST_USERSPACE is not set CONFIG_TEST_ARM_CORTEX_M=y # end of Testing # CONFIG_TRACING is not set # CONFIG_CHARACTER_FRAMEBUFFER is not set # CONFIG_JWT is not set # # Controller Area Network (CAN) bus subsystem # # CONFIG_ISOTP is not set # end of Controller Area Network (CAN) bus subsystem CONFIG_TOOLCHAIN_GNUARMEMB=y # # Build and Link Features # # # Linker Options # # CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set CONFIG_LINKER_ORPHAN_SECTION_WARN=y # CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set # CONFIG_CODE_DATA_RELOCATION is not set CONFIG_HAS_FLASH_LOAD_OFFSET=y CONFIG_USE_DT_CODE_PARTITION=y CONFIG_FLASH_LOAD_OFFSET=0x0 CONFIG_FLASH_LOAD_SIZE=0x18000 # CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set # CONFIG_CUSTOM_RODATA_LD is not set # CONFIG_CUSTOM_RWDATA_LD is not set # CONFIG_CUSTOM_SECTIONS_LD is not set CONFIG_KERNEL_ENTRY="__start" CONFIG_LINKER_SORT_BY_ALIGNMENT=y # end of Linker Options # # Compiler Options # # CONFIG_NATIVE_APPLICATION is not set CONFIG_SIZE_OPTIMIZATIONS=y # CONFIG_SPEED_OPTIMIZATIONS is not set # CONFIG_DEBUG_OPTIMIZATIONS is not set # CONFIG_NO_OPTIMIZATIONS is not set CONFIG_COMPILER_OPT="" # end of Compiler Options # CONFIG_ASSERT_ON_ERRORS is not set # CONFIG_NO_RUNTIME_CHECKS is not set CONFIG_RUNTIME_ERROR_CHECKS=y # # Build Options # CONFIG_KERNEL_BIN_NAME="zephyr" CONFIG_OUTPUT_STAT=y CONFIG_OUTPUT_DISASSEMBLY=y # CONFIG_OUTPUT_DISASSEMBLE_ALL is not set CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y CONFIG_BUILD_OUTPUT_BIN=y # CONFIG_BUILD_OUTPUT_EXE is not set # CONFIG_BUILD_OUTPUT_S19 is not set # CONFIG_BUILD_NO_GAP_FILL is not set # CONFIG_BUILD_OUTPUT_STRIPPED is not set # CONFIG_APPLICATION_DEFINED_SYSCALL is not set # CONFIG_MAKEFILE_EXPORTS is not set # CONFIG_LEGACY_DEVICETREE_MACROS is not set # end of Build Options # end of Build and Link Features # # Boot Options # # CONFIG_IS_BOOTLOADER is not set # CONFIG_BOOTLOADER_MCUBOOT is not set CONFIG_REBOOT=y # CONFIG_MISRA_SANE is not set # end of Boot Options # # Compatibility # CONFIG_COMPAT_INCLUDES=y # end of Compatibility
