Hello,
I want to use I2C slave on nrf9160, but there is no I2C slave driver implementation.
So I read that instead of this, I can use nrfx twis drivers on nrf9160.
I followed this thread https://github.com/zephyrproject-rtos/zephyr/issues/21445 to use nrfx twis drivers on zephyr.
prj.conf
CONFIG_TRUSTED_EXECUTION_NONSECURE=y CONFIG_SERIAL=y CONFIG_UART_INTERRUPT_DRIVEN=y CONFIG_NRFX_TWIS=y CONFIG_NRFX_TWIS0=y
nrf9160_pca10090ns.overlay
&i2c0 {
compatible = "nordic,nrf-twis";
status = "okay";
sda-pin = < 19 >;
scl-pin = < 18 >;
};
When I open the project with these prj.conf and overlay file, I am getting this error:
Loading solution twis_040820.emProject
Executing load commands
cmake -GNinja -DBOARD=nrf9160_pca10090ns -DBOARD_DIR=C:/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C:/gnuarmemb -BC:/ncs/nrf/samples/jagruti_codes/twis_040820/build_nrf9160_pca10090ns -HC:/ncs/nrf/samples/jagruti_codes/twis_040820 -DDTC_OVERLAY_FILE=C:/ncs/nrf/samples/jagruti_codes/twis_040820/nrf9160_pca10090ns.overlay -DEXTRA_KCONFIG_TARGETS=menuconfig_ses -DEXTRA_KCONFIG_TARGET_COMMAND_FOR_menuconfig_ses=D:/nRF9160-DK/EmbeddedStudio_ARM_Nordic_v420a_win_x64/arm_segger_embedded_studio_v420a_win_x64_nordic/html/configure_nordic_project_menuconfig.py
-- Using application from 'C:/ncs/nrf/samples/jagruti_codes/twis_040820'
Zephyr version: 2.0.99
-- Selected BOARD nrf9160_pca10090ns
-- Found west: C:/Python37/Scripts/west.exe (found suitable version "0.6.2", minimum required is "0.6.0")
-- Cache files will be written to: C:\Users\b.carre\AppData\Local/.cache/zephyr
-- Loading C:/ncs/zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090ns.dts as base
-- Overlaying C:/ncs/zephyr/dts/common/common.dts
-- Overlaying C:/ncs/nrf/samples/jagruti_codes/twis_040820/nrf9160_pca10090ns.overlay
device tree error: 'clock-frequency' appears in /soc/peripheral@40000000/i2c@8000 in nrf9160_pca10090ns.dts.pre.tmp, but is not declared in 'properties:' in C:/ncs/zephyr/dts/bindings\i2c\nordic,nrf-twis.yaml
CMake Error at C:/ncs/zephyr/cmake/dts.cmake:182 (message):
new extractor failed with return code: 1
Call Stack (most recent call first):
C:/ncs/zephyr/cmake/app/boilerplate.cmake:559 (include)
CMakeLists.txt:2 (include)
-- Configuring incomplete, errors occurred!
Project load failed
Reported error: solution load command failed (1)
If I remove the compatible = "nordic,nrf-twis"; from overlay file, then there is no error but twis does not work.
Also while adding the IRQ handler,
IRQ_CONNECT(DT_NORDIC_NRF_I2C_I2C_2_IRQ_0,
DT_NORDIC_NRF_I2C_I2C_2_IRQ_0_PRIORITY,
nrfx_isr, nrfx_twis_2_irq_handler, 0);
I have these above options available.
But I should use:
IRQ_CONNECT(DT_NORDIC_NRF_TWIS_I2C_0_IRQ_0,
DT_NORDIC_NRF_TWIS_I2C_0_IRQ_0_PRIORITY,
nrfx_isr, nrfx_twis_0_irq_handler, 0);
But using this, I get the error.
How to solve this problem?
