nRF Sniffer option not available in Wireshark for Mac

[SarthakJ]

I am trying to capture sniffer logs for a custom BLE peripheral using nRF51 dongle and Wireshark. I am following this guide here to install the Sniffer tool in Wireshark. 

I have programmed my nRF51 dongle using the Programmer app in nRF Connect app. I programmed it with the hex file sniffer_pca10031_129d2b3.hex because the dongle has a sticker of PCA10031 on it. 

I am currently stuck at Step 4. I successfully completed step 3 and below is the result when I run the command sh nrf_sniffer_ble.sh --extcap-interfaces

usage: dirname path
extcap {version=3.0.0}{display=nRF Sniffer for Bluetooth LE}{help=https://www.nordicsemi.com/Software-and-Tools/Development-Tools/nRF-Sniffer-for-Bluetooth-LE}
interface {value=/dev/cu.usbmodem0006804533651}{display=nRF Sniffer for Bluetooth LE}
control {number=0}{type=selector}{display=Device}{tooltip=Device list}
control {number=1}{type=string}{display=Passkey / OOB key}{tooltip=6 digit temporary key or 16 byte Out-of-band (OOB) key in hexadecimal starting with '0x', big endian format. If the entered key is shorter than 16 bytes, it will be zero-padded in front'}{validation=\b^(([0-9]{6})|(0x[0-9a-fA-F]{1,32}))$\b}
control {number=2}{type=string}{display=Adv Hop}{default=37,38,39}{tooltip=Advertising channel hop sequence. Change the order in which the siffer switches advertising channels. Valid channels are 37, 38 and 39 separated by comma.}{validation=^\s*((37|38|39)\s*,\s*){0,2}(37|38|39){1}\s*$}{required=true}
control {number=3}{type=button}{role=help}{display=Help}{tooltip=Access user guide (launches browser)}
control {number=4}{type=button}{role=restore}{display=Defaults}{tooltip=Resets the user interface and clears the log file}
control {number=5}{type=button}{role=logger}{display=Log}{tooltip=Log per interface}
value {control=0}{value= }{display=All advertising devices}{default=true}

I installed the latest Wireshark version for Mac and there was no Interface Toolbars option under View. I found this post here which says that the guide was written for older version so I downgraded my Wireshark to v2.4.2 and also tried on v2.4.6 but in vain.

I tried rebooting the Wireshark software and also the laptop but the option did not appear. I also unplugged and plugged back the dongle to see any changes in the list of interfaces (after clicking Refresh) but it did not list nRF Sniffer for Bluetooth LE

I found a similar ticket here, I made sure that my unzipped contents were swimming in the extcap directory directly and were not in a separate folder. When I ran this command 

python nrf_sniffer_ble.py --extcap-interfaces

I got this error:

  File "nrf_sniffer_ble.py", line 245
    header += struct.pack('<L', int((timestamp - int(timestamp)) * 1_000_000))  # Microseconds
                                                                           ^
SyntaxError: invalid syntax

Could you please tell me how do I capture the sniffer logs? Is there an updated guide for that?

[Vidar Berg]

Hello,

Do you have one or multiple installations of Python 3, and are you sure the PyPi packages were installed to the same Python installation invoked by Wireshark? I'm wondering if you might be running into the problem I described in my answer here: https://devzone.nordicsemi.com/f/nordic-q-a/56137/nrf-sniffer-v3-0-0-on-mac-os-does-not-work/227839#227839

python nrf_sniffer_ble.py --extcap-interfaces

I got this error:

It looks like 'python' is pointing to python 2.7.x on your system. Try  python3 nrf_sniffer_ble.py --extcap-interfaces

Best regards,

Vidar

[SarthakJ]

Running the command python3 nrf_sniffer_ble.py --extcap-interfaces did not produce any errors on my laptop. 
I am guessing its the issue of multiple installation of python

[SarthakJ]

I downloaded the latest SEGGER J-Link from that link above and reprogrammed my nRF51 dongle with the appropriate HEX file. I then tried to capture packets but nothing showed up on my screen. I had both the central and peripheral advertising and then connecting in the background

I then tried to disable USB mass storage as seen from the logs below:

Last login: Wed Aug 19 16:03:27 on ttys000
sarthajagetia@Sarthaks-Mac-Book ~ % /Applications/SEGGER/JLink_V682d/JLinkExe ; exit;
SEGGER J-Link Commander V6.82d (Compiled Aug 13 2020 17:15:10)
DLL version V6.82d, compiled Aug 13 2020 17:14:54

Connecting to J-Link via USB...O.K.
Firmware: J-Link OB-SAM3U128-V2-NordicSemi compiled Mar 17 2020 14:43:00
Hardware version: V1.00
S/N: 680453365
License(s): RDI, FlashBP, FlashDL, JFlash, GDB
VTref=3.300V


Type "connect" to establish a target connection, '?' for help
J-Link>MSDDisable
Probe configured successfully.

Then I relaunched the Wireshark application and still nothing showed up on my screen. 
Are there any logs that I can grab and provide you which can help in debugging this? 

I am not sure if this is related but if I press the "red" Stop Capturing Packets button it throws me file not found error. 

[Vidar Berg]

It's probably not a communication issue then. However, the last error you got is interesting, and I think it might be an important clue. As I understand it, the nrf_ble_sniffer.py must be executed by Wireshark on startup for the nRF sniffer interface to even be detected, so it seems strange to me that it's suddenly not found when you try to abort the capture afterward. I will have to contact one of the developers on Monday to get some input on this. Sorry for the inconvenience. 

[SarthakJ]

Okay. Sounds good. I'll wait for the response from you and in the mean time please feel to let me know if you need anything else from my side to expedite the process

[Vidar Berg]

The issue didn't really make sense to the developer either. I will upgrade to the latest version of Wireshark and see if I can reproduce the problem locally. In the meantime, maybe you can try downgrading to Wireshark v3.0.7 which I'm currently using on my working setup.

[Vidar Berg]

I'm having problems with replicating the issue here, unfortunately. I re-installed the nRF sniffer with Wireshark v.3.2.6 on my mac which is currently running Catalina v.10.15.5. Are you using an older or newer version of macOS?

[SarthakJ]

I have attached my system configuration below. https://devzone.nordicsemi.com/resized-image/__size/320x240/__key/communityserver-discussions-components-files/4/Screen-Shot-2020_2D00_08_2D00_26-at-11.17.33-AM.png

I downgraded my Wireshark to v3.0.7 and I went through all the steps mentioned in the how-to and it actually worked! I see the packets being displayed on my screen. Screenshot below

[Vidar Berg]

Thanks for reporting back. I'm glad to hear that it works now! It's hard to say what fixed it, but I assume you're ok with using Wireshark v3.0.7 for now?

[SarthakJ]

Yes. I am okay being on that version for now. Thank you for helping me out!