nRFStudio can not connect to J-Link

[aileen]

I want to bring up my own new board, but the nRFStudio can not connect to the J-Link, please check the picture. I connect 4 lines from board to J-Link, including VCC, GND, SWDIO, SWCLK, and I have already checked the signal of oscillator (16MHz), everything is fine, I do not know what I should do now, please help. P.S.If I click the Recover button, the ERROR dialog showed.

[MartinBL]

Hi

• Do you have a power supply on your board? The debugger is not capable of supplying power.
• What nRF51 version and build number do you use? Some IC revisions requires an external pull down resistor on the SWDCLK line. See the Product anomaly document to find out which IC revisions are affected by this.
• Are you absolutely sure that you have connected everything correctly? If you want us to have a look at your design feel free to contact us at our support portal at nordicsemi.com. (Or you can post your design here if you are comfortable with that)
• Your J-Link driver seems to be somewhat outdated. Try to install the latest drivers: www.segger.com/jlink-software.html. You should also download the latest version of nRFgo Studio if you haven't already.

[aileen]

Thanks very much, it works now. But there is a new question, the J-Link can just use the slow clock, please see the new picture, maybe the layout has something wrong? This design just uses one 16M oscillator.