Trouble getting radio_test project to work

[Marc B]

Hi,

I have followed the documentation here trying to get the radio_test  project working for FCC certification:

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v15.3.0%2Fnrf_radio_test_example.html

Unfortunately I can not get any payload printed on the Rx board. I have tried looking through the forum but didn't find any useful information that I had not already tried.

I have attached a video recording of my laptop showing the test setup, please review that and let me know if you have any thoughts.

Some extra information:

The code is completely unmodified from the example. The board used is a custom board using nRF52840 BLE module from U-Blox (BMD-340)

The BLE functionality is well tested.

The two boards are sitting right next to each other so this is not a range issue.

Regards

Marc

[Kenneth]

Hello,

Try using start_tx_modulated_carrier:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/nrf_radio_test_example.html#nrf_radio_test_example_testing

Kenneth