Hello,
I have nrf52810 with soft device S132 5.1, SDK 14.2.
It works fine when NRF_LOG_ENABLED is enabled, data from NUS are printed in debug console. But Im not able to get any output on uart pins.
For other applications, im using libuarte without problems, but that is not avaiable for sdk14.2.
Please can you point me out how to get uart output? RX, TX pins are correct and checked on scope.
Thank you, Hynek
/**
* Copyright (c) 2016 - 2017, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include "nordic_common.h"
#include "app_error.h"
#include "app_uart.h"
#include "ble_db_discovery.h"
#include "app_timer.h"
#include "app_util.h"
#include "bsp_btn_ble.h"
#include "ble.h"
#include "ble_gap.h"
#include "ble_hci.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "nrf_sdh_soc.h"
#include "nrf_pwr_mgmt.h"
#include "ble_advdata.h"
#include "ble_nus_c.h"
#include "nrf_ble_gatt.h"
#include "nrf_delay.h"
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#if defined (UART_PRESENT)
#include "nrf_uart.h"
#endif
#if defined (UARTE_PRESENT)
#include "nrf_uarte.h"
#endif
#define APP_BLE_CONN_CFG_TAG 1 /**< A tag that refers to the BLE stack configuration we set with @ref sd_ble_cfg_set. Default tag is @ref BLE_CONN_CFG_TAG_DEFAULT. */
#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shoulnd't need to modify this value. */
#define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */
#define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */
#define SCAN_INTERVAL 0x00A0 /**< Determines scan interval in units of 0.625 millisecond. */
#define SCAN_WINDOW 0x0050 /**< Determines scan window in units of 0.625 millisecond. */
#define SCAN_TIMEOUT 0x0000 /**< Timout when scanning. 0x0000 disables timeout. */
#define MIN_CONNECTION_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS) /**< Determines minimum connection interval in millisecond. */
#define MAX_CONNECTION_INTERVAL MSEC_TO_UNITS(75, UNIT_1_25_MS) /**< Determines maximum connection interval in millisecond. */
#define SLAVE_LATENCY 0 /**< Determines slave latency in counts of connection events. */
#define SUPERVISION_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Determines supervision time-out in units of 10 millisecond. */
#define UUID16_SIZE 2 /**< Size of 16 bit UUID */
#define UUID32_SIZE 4 /**< Size of 32 bit UUID */
#define UUID128_SIZE 16 /**< Size of 128 bit UUID */
#define ECHOBACK_BLE_UART_DATA 0 /**< Echo the UART data that is received over the Nordic UART Service back to the sender. */
BLE_NUS_C_DEF(m_ble_nus_c); /**< BLE NUS service client instance. */
NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
BLE_DB_DISCOVERY_DEF(m_db_disc); /**< DB discovery module instance. */
static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
/**@brief Connection parameters requested for connection. */
static ble_gap_conn_params_t const m_connection_param =
{
(uint16_t)MIN_CONNECTION_INTERVAL, // Minimum connection
(uint16_t)MAX_CONNECTION_INTERVAL, // Maximum connection
(uint16_t)SLAVE_LATENCY, // Slave latency
(uint16_t)SUPERVISION_TIMEOUT // Supervision time-out
};
/** @brief Parameters used when scanning. */
static ble_gap_scan_params_t const m_scan_params =
{
.active = 1,
.interval = SCAN_INTERVAL,
.window = SCAN_WINDOW,
.timeout = SCAN_TIMEOUT,
#if (NRF_SD_BLE_API_VERSION <= 2)
.selective = 0,
.p_whitelist = NULL,
#endif
#if (NRF_SD_BLE_API_VERSION >= 3)
.use_whitelist = 0,
#endif
};
/**@brief NUS uuid. */
static ble_uuid_t const m_nus_uuid =
{
.uuid = BLE_UUID_NUS_SERVICE,
.type = NUS_SERVICE_UUID_TYPE
};
/**@brief Function for asserts in the SoftDevice.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyze
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] p_file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(0xDEADBEEF, line_num, p_file_name);
}
/**@brief Function to start scanning. */
static void scan_start(void)
{
ret_code_t ret;
ret = sd_ble_gap_scan_start(&m_scan_params);
APP_ERROR_CHECK(ret);
// ret = bsp_indication_set(BSP_INDICATE_SCANNING);
// APP_ERROR_CHECK(ret);
}
/**@brief Function for handling database discovery events.
*
* @details This function is callback function to handle events from the database discovery module.
* Depending on the UUIDs that are discovered, this function should forward the events
* to their respective services.
*
* @param[in] p_event Pointer to the database discovery event.
*/
static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
ble_nus_c_on_db_disc_evt(&m_ble_nus_c, p_evt);
}
/**@brief Function for handling characters received by the Nordic UART Service.
*
* @details This function takes a list of characters of length data_len and prints the characters out on UART.
* If @ref ECHOBACK_BLE_UART_DATA is set, the data is sent back to sender.
*/
static void ble_nus_chars_received_uart_print(uint8_t * p_data, uint16_t data_len)
{
ret_code_t ret_val;
// NRF_LOG_DEBUG("Receiving data.");
// NRF_LOG_HEXDUMP_DEBUG(p_data, data_len);
//float spo2;
// char b[] = {p_data[9], p_data[8], p_data[7], p_data[6] };
// memcpy(&spo2, &b, sizeof(spo2));
// printf(p_data);
//NRF_LOG_INFO("%X",p_data);
/* NRF_LOG_INFO("Line1> %x, %x, %x, %x, %x ,%d",
p_data[0], //Packet Start 0xFF
p_data[1], // General error
p_data[2], // Pair status
p_data[3], // Battery status
p_data[4], // State
p_data[5] // Status
); // printime hodnoty co prisly skrz bluetooth.
// NRF_LOG_INFO("Line2> %f ", spo2
// NRF_LOG_INFO("Line2> %x, %x, %x, %x, %x, %x",
p_data[6],
p_data[7],
p_data[8],
p_data[9],
p_data[10],
p_data[11]
); // printime hodnoty co prisly skrz bluetooth.
*/
for (uint32_t i = 0; i < data_len; i++)
{
do
{
ret_val = app_uart_put(p_data[i]);
if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
{
// NRF_LOG_ERROR("app_uart_put failed for index 0x%04x.", i);
APP_ERROR_CHECK(ret_val);
}
} while (ret_val == NRF_ERROR_BUSY);
}
if (p_data[data_len-1] == '\r')
{
while (app_uart_put('\n') == NRF_ERROR_BUSY);
}
if (ECHOBACK_BLE_UART_DATA)
{
// Send data back to peripheral.
do
{
ret_val = ble_nus_c_string_send(&m_ble_nus_c, p_data, data_len);
if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
{
// NRF_LOG_ERROR("Failed sending NUS message. Error 0x%x. ", ret_val);
APP_ERROR_CHECK(ret_val);
}
} while (ret_val == NRF_ERROR_BUSY);
}
}
/**@brief Function for handling app_uart events.
*
* @details This function will receive a single character from the app_uart module and append it to
* a string. The string will be be sent over BLE when the last character received was a
* 'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
*/
void uart_event_handle(app_uart_evt_t * p_event)
{
static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
static uint16_t index = 0;
uint32_t ret_val;
// https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v14.2.0%2Fnrf52810_user_guide.html&cp=4_0_2_5_0
switch (p_event->evt_type)
{
/**@snippet [Handling data from UART] */
// int i=0;
// i++;
case APP_UART_DATA_READY:
UNUSED_VARIABLE(app_uart_get(&data_array[index]));
index++;
if ((data_array[index - 1] == '\n') || (index >= (m_ble_nus_max_data_len)))
{
// NRF_LOG_DEBUG("Ready to send data over BLE NUS");
// NRF_LOG_HEXDUMP_DEBUG(data_array, index);
do
{
ret_val = ble_nus_c_string_send(&m_ble_nus_c, data_array, index);
if ( (ret_val != NRF_ERROR_INVALID_STATE) && (ret_val != NRF_ERROR_BUSY) )
{
APP_ERROR_CHECK(ret_val);
}
} while (ret_val == NRF_ERROR_BUSY);
index = 0;
}
break;
/**@snippet [Handling data from UART] */
case APP_UART_COMMUNICATION_ERROR:
// NRF_LOG_ERROR("Communication error occurred while handling UART.");
APP_ERROR_HANDLER(p_event->data.error_communication);
break;
case APP_UART_FIFO_ERROR:
// NRF_LOG_ERROR("Error occurred in FIFO module used by UART.");
APP_ERROR_HANDLER(p_event->data.error_code);
break;
case APP_UART_TX_EMPTY: // An event indicating that UART has completed transmission of all available data in the TX FIFO.
// NRF_LOG_ERROR("TX empty hynek.");
break;
default:
break;
}
}
/**@brief Callback handling NUS Client events.
*
* @details This function is called to notify the application of NUS client events.
*
* @param[in] p_ble_nus_c NUS Client Handle. This identifies the NUS client
* @param[in] p_ble_nus_evt Pointer to the NUS Client event.
*/
/**@snippet [Handling events from the ble_nus_c module] */
static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, ble_nus_c_evt_t const * p_ble_nus_evt)
{
ret_code_t err_code;
switch (p_ble_nus_evt->evt_type)
{
case BLE_NUS_C_EVT_DISCOVERY_COMPLETE:
// NRF_LOG_INFO("Discovery complete.");
err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);
APP_ERROR_CHECK(err_code);
err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c);
APP_ERROR_CHECK(err_code);
// NRF_LOG_INFO("Connected to device with Nordic UART Service.");
break;
case BLE_NUS_C_EVT_NUS_TX_EVT:
ble_nus_chars_received_uart_print(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len);
break;
case BLE_NUS_C_EVT_DISCONNECTED:
NRF_LOG_INFO("Disconnected.");
scan_start();
break;
default:
break;
}
}
/**@snippet [Handling events from the ble_nus_c module] */
/**
* @brief Function for shutdown events.
*
* @param[in] event Shutdown type.
*/
static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
{
ret_code_t err_code;
//err_code = bsp_indication_set(BSP_INDICATE_IDLE);
//APP_ERROR_CHECK(err_code);
switch (event)
{
case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
// Prepare wakeup buttons.
//err_code = bsp_btn_ble_sleep_mode_prepare();
//APP_ERROR_CHECK(err_code);
break;
default:
break;
}
return true;
}
NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
/**@brief Reads an advertising report and checks if a UUID is present in the service list.
*
* @details The function is able to search for 16-bit, 32-bit and 128-bit service UUIDs.
* To see the format of a advertisement packet, see
* https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
*
* @param[in] p_target_uuid The UUID to search for.
* @param[in] p_adv_report Pointer to the advertisement report.
*
* @retval true if the UUID is present in the advertisement report. Otherwise false
*/
static bool is_uuid_present(ble_uuid_t const * p_target_uuid,
ble_gap_evt_adv_report_t const * p_adv_report)
{
ret_code_t err_code;
ble_uuid_t extracted_uuid;
uint16_t index = 0;
uint8_t * p_data = (uint8_t *)p_adv_report->data;
while (index < p_adv_report->dlen)
{
uint8_t field_length = p_data[index];
uint8_t field_type = p_data[index + 1];
if ( (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE))
{
for (uint32_t i = 0; i < (field_length / UUID16_SIZE); i++)
{
err_code = sd_ble_uuid_decode(UUID16_SIZE,
&p_data[i * UUID16_SIZE + index + 2],
&extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if (extracted_uuid.uuid == p_target_uuid->uuid)
{
return true;
}
}
}
}
else if ( (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE))
{
for (uint32_t i = 0; i < (field_length / UUID32_SIZE); i++)
{
err_code = sd_ble_uuid_decode(UUID32_SIZE,
&p_data[i * UUID32_SIZE + index + 2],
&extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if ( (extracted_uuid.uuid == p_target_uuid->uuid)
&& (extracted_uuid.type == p_target_uuid->type))
{
return true;
}
}
}
}
else if ( (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE))
{
err_code = sd_ble_uuid_decode(UUID128_SIZE, &p_data[index + 2], &extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if ( (extracted_uuid.uuid == p_target_uuid->uuid)
&& (extracted_uuid.type == p_target_uuid->type))
{
return true;
}
}
}
index += field_length + 1;
}
return false;
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
ret_code_t err_code;
ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_ADV_REPORT:
{
ble_gap_evt_adv_report_t const * p_adv_report = &p_gap_evt->params.adv_report;
if (is_uuid_present(&m_nus_uuid, p_adv_report))
{
err_code = sd_ble_gap_connect(&p_adv_report->peer_addr,
&m_scan_params,
&m_connection_param,
APP_BLE_CONN_CFG_TAG);
if (err_code == NRF_SUCCESS)
{
// scan is automatically stopped by the connect
//err_code = bsp_indication_set(BSP_INDICATE_IDLE);
//APP_ERROR_CHECK(err_code);
/*NRF_LOG_INFO("Connecting to target %02x%02x%02x%02x%02x%02x",
p_adv_report->peer_addr.addr[0],
p_adv_report->peer_addr.addr[1],
p_adv_report->peer_addr.addr[2],
p_adv_report->peer_addr.addr[3],
p_adv_report->peer_addr.addr[4],
p_adv_report->peer_addr.addr[5]
);*/
}
}
}break; // BLE_GAP_EVT_ADV_REPORT
case BLE_GAP_EVT_CONNECTED:
// NRF_LOG_INFO("Connected to target");
err_code = ble_nus_c_handles_assign(&m_ble_nus_c, p_ble_evt->evt.gap_evt.conn_handle, NULL);
APP_ERROR_CHECK(err_code);
// err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
// APP_ERROR_CHECK(err_code);
// start discovery of services. The NUS Client waits for a discovery result
err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_SCAN)
{
// NRF_LOG_INFO("Scan timed out.");
scan_start();
}
else if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
{
//NRF_LOG_INFO("Connection Request timed out.");
}
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
// Accepting parameters requested by peer.
err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
&p_gap_evt->params.conn_param_update_request.conn_params);
APP_ERROR_CHECK(err_code);
break;
#ifndef S140
case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
{
//NRF_LOG_DEBUG("PHY update request.");
ble_gap_phys_t const phys =
{
.rx_phys = BLE_GAP_PHY_AUTO,
.tx_phys = BLE_GAP_PHY_AUTO,
};
err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
APP_ERROR_CHECK(err_code);
} break;
#endif
case BLE_GATTC_EVT_TIMEOUT:
// Disconnect on GATT Client timeout event.
//NRF_LOG_DEBUG("GATT Client Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server timeout event.
// NRF_LOG_DEBUG("GATT Server Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
break;
}
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
// Configure the BLE stack using the default settings.
// Fetch the start address of the application RAM.
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
if (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)
{
//NRF_LOG_INFO("ATT MTU exchange completed.");
m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
//NRF_LOG_INFO("Ble NUS max data length set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
}
}
/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
ret_code_t err_code;
err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
APP_ERROR_CHECK(err_code);
err_code = nrf_ble_gatt_att_mtu_central_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling events from the BSP module.
*
* @param[in] event Event generated by button press.
*/
void bsp_event_handler(bsp_event_t event)
{
ret_code_t err_code;
switch (event)
{
case BSP_EVENT_SLEEP:
nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
break;
case BSP_EVENT_DISCONNECT:
err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
break;
default:
break;
}
}
#define UART_HWFC APP_UART_FLOW_CONTROL_DISABLED
/**@brief Function for initializing the UART. */
static void uart_init(void)
{
ret_code_t err_code;
const app_uart_comm_params_t comm_params =
{
20, //RX_PIN_NUMBER,
18, //TX_PIN_NUMBER,
RTS_PIN_NUMBER,
CTS_PIN_NUMBER,
UART_HWFC,
false,
NRF_UART_BAUDRATE_115200
};
APP_UART_FIFO_INIT(&comm_params,
UART_RX_BUF_SIZE,
UART_TX_BUF_SIZE,
uart_event_handle,
APP_IRQ_PRIORITY_LOWEST,
err_code);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the NUS Client. */
static void nus_c_init(void)
{
ret_code_t err_code;
ble_nus_c_init_t init;
init.evt_handler = ble_nus_c_evt_handler;
err_code = ble_nus_c_init(&m_ble_nus_c, &init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing buttons and leds. */
static void buttons_leds_init(void)
{
ret_code_t err_code;
bsp_event_t startup_event;
err_code = bsp_init(BSP_INIT_LED, bsp_event_handler);
APP_ERROR_CHECK(err_code);
err_code = bsp_btn_ble_init(NULL, &startup_event);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the timer. */
static void timer_init(void)
{
ret_code_t err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the nrf log module. */
static void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEFAULT_BACKENDS_INIT();
}
/**@brief Function for initializing the Power manager. */
static void power_init(void)
{
ret_code_t err_code = nrf_pwr_mgmt_init();
APP_ERROR_CHECK(err_code);
}
/** @brief Function for initializing the Database Discovery Module. */
static void db_discovery_init(void)
{
ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
APP_ERROR_CHECK(err_code);
}
#define WHITELIST_PEERS 1
const ble_gap_addr_t const m_peripheral_addr =
{
.addr_type = BLE_GAP_ADDR_TYPE_RANDOM_STATIC,
.addr = {0xCE, 0x42, 0xBB, 0xD5, 0x91, 0x12}
};
ble_gap_addr_t const * addr_ptrs[WHITELIST_PEERS];
int main(void)
{
log_init();
timer_init();
power_init();
uart_init();
// buttons_leds_init();
db_discovery_init();
ble_stack_init();
gatt_init();
nus_c_init();
// addr_ptrs[0] = &m_peripheral_addr;
// uint32_t err_code = sd_ble_gap_whitelist_set(addr_ptrs, 1); //ERRATA Hynek https://devzone.nordicsemi.com/f/nordic-q-a/75020/use-of-whitelist
// APP_ERROR_CHECK(err_code);
// Start scanning for peripherals and initiate connection
// with devices that advertise NUS UUID.
//printf("BLE UART central1 example started.\r\n");
// NRF_LOG_INFO("BLE UART central2 example started.");
scan_start();
ret_code_t err_code;
err_code = app_uart_put('A');
APP_ERROR_CHECK(err_code);
printf("\r\nStart: \r\n");
for (;;)
{
// err_code = app_uart_put('A');
// APP_ERROR_CHECK(err_code);
// nrf_delay_ms(500);
if (NRF_LOG_PROCESS() == false)
{
nrf_pwr_mgmt_run();
}
}
}
