How to read Value if Service 128bit UUID is completely different from Characteristics 128 bit UUID ?

[Vipul2988]

I am able to pair a peripheral device using advertising 16bit UUID to the Central Device(nRF52840-DK board).

Also I am able to read the Battery level service and Device  information service using bas_c_init() and dis_c_inti(). That' Good.

Now device has Some other Custom Primary services with different 128bit service UUID & 128bit Characteristics UUID. See Image Below 

 

To read such values from Unknown Characteristics which function we need to use ? 

I am using nRF52840-DK with nRF5_SDK_17.0.2 and S140

[Einar Thorsrud]

Hi,

You need to implement your own client for that custom service. This is a service with a long (128 bit) UUID, so you should refer to one of the custom service client implementations in the SDK and adapt it to the service you want to use. I suspect the LBS service might be a good starting point here, so take a look at components\ble\ble_services\ble_lbs_c\ble_lbs_c.c and components\ble\ble_services\ble_lbs_c\ble_lbs_c.h.

[Vipul2988]

Hi Einar,

I am getting Fatal Error when I am changing the UUID base and  UUID Service like below.

Also I was not able to define both Service And Characteristics 128bit different as image shown in the primary question.   

[Einar Thorsrud]

I will look at it tomorrow. In the mean time, can you post the code using Insert -> Code instead, to make it easier to read, search and copy-paste? Also, please select the Debug build target from SES and test again. Then the error message will show what error code was returned from where, which is key information when debugging.

[Vipul2988]

I have modified below files from the ble_app_rscs_c_pca10056_s140  and SDK Version is 15.3.0

Fullscreen 404335.main.c Download

/**
 * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
/**
 * @brief BLE Running Speed and Cadence Collector application main file.
 *
 * This file contains the source code for a sample Running Speed and Cadence collector application.
 */

#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf_sdm.h"
#include "ble.h"
#include "ble_hci.h"
#include "ble_db_discovery.h"
#include "ble_srv_common.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "nrf_sdh_soc.h"
#include "nrf_pwr_mgmt.h"
#include "app_util.h"
#include "app_error.h"
#include "ble_lbs_c.h"
#include "ble_dis_c.h"
#include "ble_rscs_c.h"
#include "app_util.h"
#include "app_timer.h"
#include "bsp_btn_ble.h"
#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "fds.h"
#include "nrf_fstorage.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_pwr_mgmt.h"
#include "nrf_ble_scan.h"

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"

#define CENTRAL_SCANNING_LED            BSP_BOARD_LED_1                     /**< Scanning LED will be on when the device is scanning. */
#define CENTRAL_CONNECTED_LED           BSP_BOARD_LED_2                     /**< Connected LED will be on when the device is connected. */
#define LEDBUTTON_LED                   BSP_BOARD_LED_3                     /**< LED to indicate a change of state of the the Button characteristic on the peer. */


#define APP_BLE_CONN_CFG_TAG        1                                   /**< Tag that identifies the BLE configuration of the SoftDevice. */
#define APP_BLE_OBSERVER_PRIO       3                                   /**< BLE observer priority of the application. There is no need to modify this value. */
#define APP_SOC_OBSERVER_PRIO       1                                   /**< SoC observer priority of the application. There is no need to modify this value. */

#define SEC_PARAM_BOND              1                                   /**< Perform bonding. */
#define SEC_PARAM_MITM              0                                   /**< Man In The Middle protection not required. */
#define SEC_PARAM_LESC              0                                   /**< LE Secure Connections not enabled. */
#define SEC_PARAM_KEYPRESS          0                                   /**< Keypress notifications not enabled. */
#define SEC_PARAM_IO_CAPABILITIES   BLE_GAP_IO_CAPS_NONE                /**< No I/O capabilities. */
#define SEC_PARAM_OOB               0                                   /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE      7                                   /**< Minimum encryption key size. */
#define SEC_PARAM_MAX_KEY_SIZE      16                                  /**< Maximum encryption key size. */

#define SCAN_INTERVAL               0x00A0                              /**< Determines scan interval in units of 0.625 millisecond. */
#define SCAN_WINDOW                 0x0050                              /**< Determines scan window in units of 0.625 millisecond. */

#define SCAN_DURATION           0x0000                              /**< Duration of the scanning in units of 10 milliseconds. If set to 0x0000, scanning continues until it is explicitly disabled. */
#define SCAN_DURATION_WITELIST  3000                                /**< Duration of the scanning in units of 10 milliseconds. */

#define MIN_CONNECTION_INTERVAL     MSEC_TO_UNITS(7.5, UNIT_1_25_MS)    /**< Determines minimum connection interval in milliseconds. */
#define MAX_CONNECTION_INTERVAL     MSEC_TO_UNITS(30, UNIT_1_25_MS)     /**< Determines maximum connection interval in milliseconds. */
#define SLAVE_LATENCY               0                                   /**< Determines slave latency in counts of connection events. */
#define SUPERVISION_TIMEOUT         MSEC_TO_UNITS(4000, UNIT_10_MS)     /**< Determines supervision timeout in units of 10 millisecond. */

#define TARGET_UUID                 BLE_UUID_XYLEM_PRES_SERVICE  /**< Target UUID that the application looks for. */

/**@brief Variable length data encapsulation in terms of length and pointer to data. */
typedef struct
{
    uint8_t * p_data;   /**< Pointer to data. */
    uint16_t  data_len; /**< Length of data. */
} data_t;


/**@brief Strings to display data retrieved by Device Information Service client module. */
static char const * const m_dis_char_names[] =
{
    "Manufacturer Name String",
    "Model Number String     ",
    "Serial Number String    ",
    "Hardware Revision String",
    "Firmware Revision String",
    "Software Revision String",
    "System ID",
    "IEEE 11073-20601 Regulatory Certification Data List",
    "PnP ID"
};

BLE_LBS_C_DEF(m_ble_lbs_c);                                 /**< Main structure used by the LBS client module. */
BLE_DIS_C_DEF(m_ble_dis_c);                                 /**< Device Information Service client instance. */
BLE_RSCS_C_DEF(m_rscs_c);                                   /**< Running Speed and Cadence Service client instance. */
NRF_BLE_GATT_DEF(m_gatt);                                   /**< GATT module instance. */
BLE_DB_DISCOVERY_DEF(m_db_disc);                            /**< Database discovery module instance. */
NRF_BLE_SCAN_DEF(m_scan);                                   /**< Scanning Module instance. */

static uint16_t              m_conn_handle;                 /**< Current connection handle. */
static bool                  m_whitelist_disabled;          /**< True if the whitelist is temporarily disabled. */
static bool                  m_memory_access_in_progress;   /**< Flag to keep track of ongoing operations on persistent memory. */
static bool                  m_rscs_log_enabled;            /**< Flag to enable logs related with RSCS measurements. */

static ble_gap_scan_params_t m_scan_param =                 /**< Scan parameters requested for scanning and connection. */
{
    .active        = 0x01,
    .interval      = NRF_BLE_SCAN_SCAN_INTERVAL,
    .window        = NRF_BLE_SCAN_SCAN_WINDOW,
    .filter_policy = BLE_GAP_SCAN_FP_WHITELIST,
    .timeout       = SCAN_DURATION_WITELIST,
    .scan_phys     = BLE_GAP_PHY_1MBPS,
    .extended      = 1,
};



/**@brief Function for the LEDs initialization.
 *
 * @details Initializes all LEDs used by the application.
 */
static void leds_init(void)
{
    bsp_board_init(BSP_INIT_LEDS);
}


static void scan_start(void);


/**@brief Function for handling asserts in the SoftDevice.
 *
 * @details This function is called in case of an assert in the SoftDevice.
 *
 * @warning This handler is only an example and is not meant for the final product. You need to analyze
 *          how your product is supposed to react in case of an assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num     Line number of the failing assert call.
 * @param[in] p_file_name  File name of the failing assert call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(0xDEADBEEF, line_num, p_file_name);
}


/**@brief Function for handling database discovery events.
 *
 * @details This function is a callback function to handle events from the database discovery module.
 *          Depending on the UUIDs that are discovered, this function forwards the events
 *          to their respective services.
 *
 * @param[in] p_event  Pointer to the database discovery event.
 *
 */
static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    ble_rscs_on_db_disc_evt(&m_rscs_c, p_evt);
    ble_dis_c_on_db_disc_evt(&m_ble_dis_c, p_evt);
    ble_lbs_on_db_disc_evt(&m_ble_lbs_c, p_evt);
}


/**@brief Function for handling Peer Manager events.
 *
 * @param[in] p_evt  Peer Manager event.
 */
static void pm_evt_handler(pm_evt_t const * p_evt)
{
    pm_handler_on_pm_evt(p_evt);
    pm_handler_disconnect_on_sec_failure(p_evt);
    pm_handler_flash_clean(p_evt);

    switch (p_evt->evt_id)
    {
        case PM_EVT_PEERS_DELETE_SUCCEEDED:
            scan_start();
            break;

        default:
            break;
    }
}


/**
 * @brief Function for handling shutdown events.
 *
 * @param[in]   event       Shutdown type.
 */
static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
{
    ret_code_t err_code;

    err_code = bsp_indication_set(BSP_INDICATE_IDLE);
    APP_ERROR_CHECK(err_code);

    switch (event)
    {
        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
            // Prepare wakeup buttons.
            err_code = bsp_btn_ble_sleep_mode_prepare();
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }

    return true;
}

NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);

/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
 */
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    ret_code_t            err_code;
    ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
        {
            // Discover the peer's services.
            NRF_LOG_INFO("Connected.");
            err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
            APP_ERROR_CHECK(err_code);

            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);

            // Update LEDs status, and check if we should be looking for more
            // peripherals to connect to.
            bsp_board_led_on(CENTRAL_CONNECTED_LED);
            bsp_board_led_off(CENTRAL_SCANNING_LED);

            if (ble_conn_state_central_conn_count() < NRF_SDH_BLE_CENTRAL_LINK_COUNT)
            {
                NRF_LOG_INFO("Disconnected.");
                scan_start();
            }
        } break;

        case BLE_GAP_EVT_TIMEOUT:
        {
            if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
            {
                NRF_LOG_DEBUG("Connection Request timed out.");
            }
        } break;

        case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
        {
            // Accepting parameters requested by peer.
            err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
                                                    &p_gap_evt->params.conn_param_update_request.conn_params);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_DISCONNECTED:
        {
            NRF_LOG_INFO("Disconnected. conn_handle: 0x%x, reason: 0x%x",
                         p_gap_evt->conn_handle,
                         p_gap_evt->params.disconnected.reason);

            if (ble_conn_state_central_conn_count() < NRF_SDH_BLE_CENTRAL_LINK_COUNT)
            {
                scan_start();
            }
        } break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTC_EVT_TIMEOUT:
        {
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTS_EVT_TIMEOUT:
        {
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
        } break;

        default:
            break;
    }
}


/**
 * @brief SoftDevice SoC event handler.
 *
 * @param[in] evt_id    SoC event.
 * @param[in] p_context Context.
 */
static void soc_evt_handler(uint32_t evt_id, void * p_context)
{
    switch (evt_id)
    {
        case NRF_EVT_FLASH_OPERATION_SUCCESS:
        /* fall through */
        case NRF_EVT_FLASH_OPERATION_ERROR:

            if (m_memory_access_in_progress)
            {
                m_memory_access_in_progress = false;
                scan_start();
            }
            break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupt.
  */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register handlers for BLE and SoC events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
    NRF_SDH_SOC_OBSERVER(m_soc_observer, APP_SOC_OBSERVER_PRIO, soc_evt_handler, NULL);
}

/**@brief Function for disabling the use of the whitelist for scanning.
 */
static void whitelist_disable(void)
{
    if (!m_whitelist_disabled)
    {
        NRF_LOG_INFO("Whitelist temporarily disabled.");
        m_whitelist_disabled = true;
        nrf_ble_scan_stop();
        scan_start();
    }
}


/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    ret_code_t err_code;

    switch (event)
    {
        case BSP_EVENT_SLEEP:
            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_WHITELIST_OFF:
            whitelist_disable();
            break;

        default:
            break;
    }
}


/**@brief Handles events coming from the LED Button central module.
 */
static void lbs_c_evt_handler(ble_lbs_c_t * p_lbs_c, ble_lbs_c_evt_t * p_lbs_c_evt)
{
    switch (p_lbs_c_evt->evt_type)
    {
        case BLE_LBS_C_EVT_DISCOVERY_COMPLETE:
        {
            ret_code_t err_code;

            err_code = ble_lbs_c_handles_assign(&m_ble_lbs_c,
                                                p_lbs_c_evt->conn_handle,
                                                &p_lbs_c_evt->params.peer_db);
            NRF_LOG_INFO("LED Button service discovered on conn_handle 0x%x.", p_lbs_c_evt->conn_handle);

            err_code = app_button_enable();
            APP_ERROR_CHECK(err_code);

            // LED Button service discovered. Enable notification of Button.
            err_code = ble_lbs_c_button_notif_enable(p_lbs_c);
            APP_ERROR_CHECK(err_code);
        } break; // BLE_LBS_C_EVT_DISCOVERY_COMPLETE

        case BLE_LBS_C_EVT_BUTTON_NOTIFICATION:
        {
            NRF_LOG_INFO("Button state changed on peer to 0x%x.", p_lbs_c_evt->params.button.button_state);
            if (p_lbs_c_evt->params.button.button_state)
            {
                bsp_board_led_on(LEDBUTTON_LED);
            }
            else
            {
                bsp_board_led_off(LEDBUTTON_LED);
            }
        } break; // BLE_LBS_C_EVT_BUTTON_NOTIFICATION

        default:
            // No implementation needed.
            break;
    }
}

/**@brief Running Speed and Cadence collector handler.
 */
static void rscs_c_evt_handler(ble_rscs_c_t * p_rsc_c, ble_rscs_c_evt_t * p_rsc_c_evt)
{
    ret_code_t err_code;

    switch (p_rsc_c_evt->evt_type)
    {
        case BLE_RSCS_C_EVT_DISCOVERY_COMPLETE:
            // Initiate bonding.
            err_code = ble_rscs_c_handles_assign(&m_rscs_c,
                                                 p_rsc_c_evt->conn_handle,
                                                 &p_rsc_c_evt->params.rscs_db);
            APP_ERROR_CHECK(err_code);

            err_code = pm_conn_secure(p_rsc_c_evt->conn_handle, false);
            if (err_code != NRF_ERROR_BUSY)
            {
                APP_ERROR_CHECK(err_code);
            }

            // Running Speed and Cadence Service discovered. Enable Running Speed and Cadence notifications.
            err_code = ble_rscs_c_rsc_notif_enable(p_rsc_c);
            APP_ERROR_CHECK(err_code);

            NRF_LOG_INFO("Running Speed and Cadence Service discovered.");
            break;

        case BLE_RSCS_C_EVT_RSC_NOTIFICATION:
        {
            if (m_rscs_log_enabled)
            {
                NRF_LOG_INFO("");
                NRF_LOG_DEBUG("RSC Measurement received %d ",
                         p_rsc_c_evt->params.rsc.inst_speed);

                NRF_LOG_INFO("Instantanious Speed   = %d", p_rsc_c_evt->params.rsc.inst_speed);
                if (p_rsc_c_evt->params.rsc.is_inst_stride_len_present)
                {
                    NRF_LOG_INFO("Stride Length         = %d",
                           p_rsc_c_evt->params.rsc.inst_stride_length);
                }
                if (p_rsc_c_evt->params.rsc.is_total_distance_present)
                {
                    NRF_LOG_INFO("Total Distance = %u",
                           (unsigned int)p_rsc_c_evt->params.rsc.total_distance);
                }
                NRF_LOG_INFO("Instantanious Cadence = %d", p_rsc_c_evt->params.rsc.inst_cadence);
                NRF_LOG_INFO("Flags");
                NRF_LOG_INFO("  Stride Length Present = %d",
                       p_rsc_c_evt->params.rsc.is_inst_stride_len_present);
                NRF_LOG_INFO("  Total Distance Present= %d",
                       p_rsc_c_evt->params.rsc.is_total_distance_present);
                NRF_LOG_INFO("  Is Running            = %d", p_rsc_c_evt->params.rsc.is_running);
            }
            break;
        }

        default:
            break;
    }
}


/**@brief Function for reading all characteristics that can be present in DIS.
 *
 * @return    The number of discovered characteristics.
 */
static uint32_t ble_dis_c_all_chars_read(void)
{
    ret_code_t err_code;
    uint32_t   disc_char_num = 0;

    for (ble_dis_c_char_type_t char_type = (ble_dis_c_char_type_t) 0;
         char_type < BLE_DIS_C_CHAR_TYPES_NUM;
         char_type++)
    {
        err_code = ble_dis_c_read(&m_ble_dis_c, char_type);

        // The NRF_ERROR_INVALID_STATE error code means that the characteristic is not present in DIS.
        if (err_code != NRF_ERROR_INVALID_STATE)
        {
            APP_ERROR_CHECK(err_code);
            disc_char_num++;
        }
    }

    return disc_char_num;
}


/**@brief Function for logging string characteristics that can be present in Device Information Service.
 *
 * @param[in] char_type Type of string characteristic.
 * @param[in] p_string  Response data of the characteristic that has been read.
 */
static void ble_dis_c_string_char_log(ble_dis_c_char_type_t            char_type,
                                      ble_dis_c_string_t const * const p_string)
{
    char response_data_string[BLE_DIS_C_STRING_MAX_LEN] = {0};

    if (sizeof(response_data_string) > p_string->len)
    {
        memcpy(response_data_string, p_string->p_data, p_string->len);
        NRF_LOG_INFO("%s: %s",
                     m_dis_char_names[char_type],
                     nrf_log_push((char *) response_data_string));
    }
    else
    {
        NRF_LOG_ERROR("String buffer for DIS characteristics is too short.")
    }
}


/**@brief Function for logging System ID characteristic data that can be present in Device Information Service.
 *
 * @param[in] p_sys_id Pointer to structure that describes the content of the System ID characteristic.
 */
static void ble_dis_c_system_id_log(ble_dis_sys_id_t const * const p_sys_id)
{
    NRF_LOG_INFO("%s:", m_dis_char_names[BLE_DIS_C_SYS_ID]);
    NRF_LOG_INFO(" Manufacturer Identifier:            0x%010X", p_sys_id->manufacturer_id);
    NRF_LOG_INFO(" Organizationally Unique Identifier: 0x%06X", p_sys_id->organizationally_unique_id);
}


/**@brief Function for logging IEEE 11073-20601 Regulatory Certification Data List characteristic
 *        data that can be present in DIS.
 *
 * @param[in] p_cert_list  Pointer to structure that describes the content of Certification Data List
 *                         characteristic.
 */
static void ble_dis_c_cert_list_log(ble_dis_reg_cert_data_list_t const * const p_cert_list)
{
    NRF_LOG_INFO("%s:", m_dis_char_names[BLE_DIS_C_CERT_LIST]);
    NRF_LOG_HEXDUMP_INFO(p_cert_list->p_list, p_cert_list->list_len);
}


/**@brief Function for logging PnP ID characteristic data that can be present in Device Information Service.
 *
 * @param[in] p_pnp_id Pointer to structure that describes the content of PnP ID characteristic.
 */
static void ble_dis_c_pnp_id_log(ble_dis_pnp_id_t const * const p_pnp_id)
{
    NRF_LOG_INFO("%s:", m_dis_char_names[BLE_DIS_C_PNP_ID]);
    NRF_LOG_INFO(" Vendor ID Source: 0x%02X", p_pnp_id->vendor_id_source);
    NRF_LOG_INFO(" Vendor ID:        0x%04X", p_pnp_id->vendor_id);
    NRF_LOG_INFO(" Product ID:       0x%04X", p_pnp_id->product_id);
    NRF_LOG_INFO(" Product Version:  0x%04X", p_pnp_id->product_version);
}


/**@brief Device Information Service client handler.
 */
static void ble_dis_c_evt_handler(ble_dis_c_t * p_ble_dis_c, ble_dis_c_evt_t const * p_ble_dis_evt)
{
    ret_code_t      err_code;
    static uint32_t disc_chars_num     = 0;
    static uint32_t disc_chars_handled = 0;

    switch (p_ble_dis_evt->evt_type)
    {
        case BLE_DIS_C_EVT_DISCOVERY_COMPLETE:
            err_code = ble_dis_c_handles_assign(p_ble_dis_c,
                                                p_ble_dis_evt->conn_handle,
                                                p_ble_dis_evt->params.disc_complete.handles);
            APP_ERROR_CHECK(err_code);

            disc_chars_num     = ble_dis_c_all_chars_read();
            disc_chars_handled = 0;
            NRF_LOG_INFO("Device Information Service discovered.");
            break;

        case BLE_DIS_C_EVT_DIS_C_READ_RSP:
        {
            ble_dis_c_evt_read_rsp_t const * p_read_rsp = &p_ble_dis_evt->params.read_rsp;

            //Print header log.
            if ((disc_chars_handled == 0) && (disc_chars_num != 0))
            {
                NRF_LOG_INFO("");
                NRF_LOG_INFO("Device Information:");
            }

            switch (p_read_rsp->char_type)
            {
                case BLE_DIS_C_MANUF_NAME:
                case BLE_DIS_C_MODEL_NUM:
                case BLE_DIS_C_SERIAL_NUM:
                case BLE_DIS_C_HW_REV:
                case BLE_DIS_C_FW_REV:
                case BLE_DIS_C_SW_REV:
                    ble_dis_c_string_char_log(p_read_rsp->char_type, &p_read_rsp->content.string);
                    break;

                case BLE_DIS_C_SYS_ID:
                    ble_dis_c_system_id_log(&p_read_rsp->content.sys_id);
                    break;

                case BLE_DIS_C_CERT_LIST:
                    ble_dis_c_cert_list_log(&p_read_rsp->content.cert_list);
                    break;

                case BLE_DIS_C_PNP_ID:
                    ble_dis_c_pnp_id_log(&p_read_rsp->content.pnp_id);
                    break;

                default:
                    break;
            }

            disc_chars_handled++;
            if(disc_chars_handled == disc_chars_num)
            {
                NRF_LOG_INFO("");
                disc_chars_handled = 0;
                disc_chars_num     = 0;
                m_rscs_log_enabled = true;
            }
         }
         break;

        case BLE_DIS_C_EVT_DIS_C_READ_RSP_ERROR:
            NRF_LOG_ERROR("Read request for: %s characteristic failed with gatt_status: 0x%04X.",
                          m_dis_char_names[p_ble_dis_evt->params.read_rsp.char_type],
                          p_ble_dis_evt->params.read_rsp_err.gatt_status);
            break;

        case BLE_DIS_C_EVT_DISCONNECTED:
            break;
    }
}


/**
 * @brief Running Speed and Cadence collector initialization.
 */
static void rscs_c_init(void)
{
    ble_rscs_c_init_t rscs_c_init_obj;

    rscs_c_init_obj.evt_handler = rscs_c_evt_handler;

    ret_code_t err_code = ble_rscs_c_init(&m_rscs_c, &rscs_c_init_obj);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the Device Information Service client. */
static void dis_c_init(void)
{
    ret_code_t       err_code;
    ble_dis_c_init_t init;

    memset(&init, 0, sizeof(ble_dis_c_init_t));
    init.evt_handler = ble_dis_c_evt_handler;

    err_code = ble_dis_c_init(&m_ble_dis_c, &init);
    APP_ERROR_CHECK(err_code);
}


/**@brief LED Button client initialization.
 */
static void lbs_c_init(void)
{
    ret_code_t       err_code;
    ble_lbs_c_init_t lbs_c_init_obj;

    lbs_c_init_obj.evt_handler = lbs_c_evt_handler;

    err_code = ble_lbs_c_init(&m_ble_lbs_c, &lbs_c_init_obj);
    APP_ERROR_CHECK(err_code);
}

/**@brief Function for initializing the Peer Manager.
 *
 * @param[in] erase_bonds  Indicates whether the bonding information must be cleared from
 *                         persistent storage during the initialization of the Peer Manager.
 */
static void peer_manager_init()
{
    ret_code_t           err_code;
    ble_gap_sec_params_t sec_param;

    err_code = pm_init();
    APP_ERROR_CHECK(err_code);

    err_code = pm_register(pm_evt_handler);
    APP_ERROR_CHECK(err_code);

    memset(&sec_param, 0, sizeof(ble_gap_sec_params_t));
    // Security parameters to be used for all security procedures.
    sec_param.bond           = SEC_PARAM_BOND;
    sec_param.mitm           = SEC_PARAM_MITM;
    sec_param.lesc           = SEC_PARAM_LESC;
    sec_param.keypress       = SEC_PARAM_KEYPRESS;
    sec_param.io_caps        = SEC_PARAM_IO_CAPABILITIES;
    sec_param.oob            = SEC_PARAM_OOB;
    sec_param.min_key_size   = SEC_PARAM_MIN_KEY_SIZE;
    sec_param.max_key_size   = SEC_PARAM_MAX_KEY_SIZE;
    sec_param.kdist_own.enc  = 1;
    sec_param.kdist_own.id   = 1;
    sec_param.kdist_peer.enc = 1;
    sec_param.kdist_peer.id  = 1;

    err_code = pm_sec_params_set(&sec_param);
    APP_ERROR_CHECK(err_code);
}


/**@brief Clear bonding information from the persistent storage.
 */
static void delete_bonds(void){
    ret_code_t err_code;

    NRF_LOG_INFO("Erase bonds");
    err_code = pm_peers_delete();
    APP_ERROR_CHECK(err_code);
}



/**
 * @brief Database discovery collector initialization.
 */
static void db_discovery_init(void)
{
    ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
    APP_ERROR_CHECK(err_code);
}


/**@brief Retrive a list of peer manager peer IDs.
 *
 * @param[inout] p_peers   The buffer where to store the list of peer IDs.
 * @param[inout] p_size    In: The size of the @p p_peers buffer.
 *                         Out: The number of peers copied in the buffer.
 */
static void peer_list_get(pm_peer_id_t * p_peers, uint32_t * p_size)
{
    pm_peer_id_t peer_id;
    uint32_t     peers_to_copy;

    peers_to_copy = (*p_size < BLE_GAP_WHITELIST_ADDR_MAX_COUNT) ?
                     *p_size : BLE_GAP_WHITELIST_ADDR_MAX_COUNT;

    peer_id = pm_next_peer_id_get(PM_PEER_ID_INVALID);
    *p_size = 0;

    while ((peer_id != PM_PEER_ID_INVALID) && (peers_to_copy--))
    {
        p_peers[(*p_size)++] = peer_id;
        peer_id = pm_next_peer_id_get(peer_id);
    }
}


static void whitelist_load()
{
    ret_code_t   ret;
    pm_peer_id_t peers[8];
    uint32_t     peer_cnt;

    memset(peers, PM_PEER_ID_INVALID, sizeof(peers));
    peer_cnt = (sizeof(peers) / sizeof(pm_peer_id_t));

    // Load all peers from the flash and whitelist them.
    peer_list_get(peers, &peer_cnt);

    ret = pm_whitelist_set(peers, peer_cnt);
    APP_ERROR_CHECK(ret);

    // Setup the list of device identities.
    // Some SoftDevices do not support this feature.
    ret = pm_device_identities_list_set(peers, peer_cnt);
    if (ret != NRF_ERROR_NOT_SUPPORTED)
    {
        APP_ERROR_CHECK(ret);
    }
}


static void on_whitelist_req(void)
{
    // Whitelist buffers.
    ble_gap_addr_t whitelist_addrs[8];
    ble_gap_irk_t  whitelist_irks[8];

    memset(whitelist_addrs, 0x00, sizeof(whitelist_addrs));
    memset(whitelist_irks,  0x00, sizeof(whitelist_irks));

    uint32_t addr_cnt = (sizeof(whitelist_addrs) / sizeof(ble_gap_addr_t));
    uint32_t irk_cnt  = (sizeof(whitelist_irks)  / sizeof(ble_gap_irk_t));

    // Reload the whitelist and whitelist all peers.
    whitelist_load();

    ret_code_t ret;

    // Get the whitelist previously set with pm_whitelist_set().
    ret = pm_whitelist_get(whitelist_addrs, &addr_cnt,
                           whitelist_irks,  &irk_cnt);

    if (((addr_cnt == 0) && (irk_cnt == 0)) ||
        (m_whitelist_disabled))
    {
        m_scan_param.filter_policy = BLE_GAP_SCAN_FP_ACCEPT_ALL;

        ret = nrf_ble_scan_params_set(&m_scan, &m_scan_param);
        APP_ERROR_CHECK(ret);
    }
}


/**@brief Function for handling Scanning Module events.
 */
static void scan_evt_handler(scan_evt_t const * p_scan_evt)
{
    ret_code_t err_code;
    switch(p_scan_evt->scan_evt_id)
    {
        case NRF_BLE_SCAN_EVT_WHITELIST_REQUEST:
        {
            on_whitelist_req();
            m_whitelist_disabled = false;
        } break;

        case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
        {
            err_code = p_scan_evt->params.connecting_err.err_code;
            APP_ERROR_CHECK(err_code);
        } break;

        case NRF_BLE_SCAN_EVT_SCAN_TIMEOUT:
        {
            NRF_LOG_INFO("Scan timed out.");
            scan_start();
        } break;

        case NRF_BLE_SCAN_EVT_FILTER_MATCH:
            break;
        case NRF_BLE_SCAN_EVT_WHITELIST_ADV_REPORT:
            break;

        default:
          break;
    }
}


/**@brief Function for initializing the scanning and setting the filters.
 */
static void scan_init(void)
{
    ret_code_t          err_code;
    nrf_ble_scan_init_t init_scan;

    ble_uuid_t uuid =
    {
        .type = BLE_UUID_TYPE_BLE,
        .uuid = TARGET_UUID,
    };

    memset(&init_scan, 0, sizeof(init_scan));

    init_scan.connect_if_match = true;
    init_scan.conn_cfg_tag     = APP_BLE_CONN_CFG_TAG;
    init_scan.p_scan_param     = &m_scan_param;

    err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_UUID_FILTER, &uuid);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_UUID_FILTER, false);
    APP_ERROR_CHECK(err_code);

    bsp_board_led_off(CENTRAL_CONNECTED_LED);
    bsp_board_led_on(CENTRAL_SCANNING_LED);
}


/**@brief Function for starting scanning.
 */
static void scan_start(void)
{
    ret_code_t err_code;

    // If there is any pending write to flash, defer scanning until it completes.
    if (nrf_fstorage_is_busy(NULL))
    {
        m_memory_access_in_progress = true;
        return;
    }

    NRF_LOG_INFO("Starting scan.");

    m_scan_param.filter_policy = BLE_GAP_SCAN_FP_WHITELIST;

    err_code = nrf_ble_scan_params_set(&m_scan, &m_scan_param);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_start(&m_scan);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing buttons and LEDs.
 *
 * @param[out] p_erase_bonds  True if the clear bonding button was pressed to wake the application up.
 */
static void buttons_leds_init(bool * p_erase_bonds)
{
    ret_code_t err_code;
    bsp_event_t startup_event;

    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);

    *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}


/**@brief Function for initializing logging. */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/**@brief Function for initializing the timer. */
static void timer_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the GATT module. */
static void gatt_init(void)
{
    ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing power management.
 */
static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling the idle state (main loop).
 *
 * @details Handles any pending log operations, then sleeps until the next event occurs.
 */
static void idle_state_handle(void)
{
    if (NRF_LOG_PROCESS() == false)
    {
        nrf_pwr_mgmt_run();
    }
}


/**@brief Function for starting a scan, or instead triggering it from the peer manager (after
 *        deleting bonds).
 *
 * @param[in] p_erase_bonds Pointer to a bool to determine whether bonds are to be deleted before scanning.
 */
void scanning_start(bool * p_erase_bonds)
{
    // Start scanning for peripherals and initiate connection
    // with devices that advertise GATT Service UUID.
    if (*p_erase_bonds == true)
    {
        // Scan is started by the PM_EVT_PEERS_DELETE_SUCCEEDED event.
        delete_bonds();
    }
    else
    {
        scan_start();
    }
}


int main(void)
{
    bool erase_bonds;

    // Initialize.
    log_init();
    timer_init();
    buttons_leds_init(&erase_bonds);
    power_management_init();
    ble_stack_init();
    gatt_init();
    peer_manager_init();
    db_discovery_init();
    rscs_c_init();
    dis_c_init();
    lbs_c_init();
    scan_init();

    whitelist_load();

    // Start execution.
    NRF_LOG_INFO("Running Speed Collector example started.");
    scanning_start(&erase_bonds);


    // Enter main loop.
    for (;;)
    {
        idle_state_handle();
    }
}

Fullscreen 8371.ble_lbs_c.c Download

/**
 * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#include "sdk_common.h"
#if NRF_MODULE_ENABLED(BLE_LBS_C)

#include "ble_lbs_c.h"
#include "ble_db_discovery.h"
#include "ble_types.h"
#include "ble_srv_common.h"
#include "ble_gattc.h"
#define NRF_LOG_MODULE_NAME ble_lbs_c
#include "nrf_log.h"
NRF_LOG_MODULE_REGISTER();

#define TX_BUFFER_MASK         0x07                  /**< TX Buffer mask, must be a mask of continuous zeroes, followed by continuous sequence of ones: 000...111. */
#define TX_BUFFER_SIZE         (TX_BUFFER_MASK + 1)  /**< Size of send buffer, which is 1 higher than the mask. */

#define WRITE_MESSAGE_LENGTH   BLE_CCCD_VALUE_LEN    /**< Length of the write message for CCCD. */
#define WRITE_MESSAGE_LENGTH   BLE_CCCD_VALUE_LEN    /**< Length of the write message for CCCD. */

typedef enum
{
    READ_REQ,  /**< Type identifying that this tx_message is a read request. */
    WRITE_REQ  /**< Type identifying that this tx_message is a write request. */
} tx_request_t;

/**@brief Structure for writing a message to the peer, i.e. CCCD.
 */
typedef struct
{
    uint8_t                  gattc_value[WRITE_MESSAGE_LENGTH];  /**< The message to write. */
    ble_gattc_write_params_t gattc_params;                       /**< GATTC parameters for this message. */
} write_params_t;

/**@brief Structure for holding data to be transmitted to the connected central.
 */
typedef struct
{
    uint16_t     conn_handle;  /**< Connection handle to be used when transmitting this message. */
    tx_request_t type;         /**< Type of this message, i.e. read or write message. */
    union
    {
        uint16_t       read_handle;  /**< Read request message. */
        write_params_t write_req;    /**< Write request message. */
    } req;
} tx_message_t;


static tx_message_t m_tx_buffer[TX_BUFFER_SIZE];  /**< Transmit buffer for messages to be transmitted to the central. */
static uint32_t     m_tx_insert_index = 0;        /**< Current index in the transmit buffer where the next message should be inserted. */
static uint32_t     m_tx_index = 0;               /**< Current index in the transmit buffer from where the next message to be transmitted resides. */


/**@brief Function for passing any pending request from the buffer to the stack.
 */
static void tx_buffer_process(void)
{
    if (m_tx_index != m_tx_insert_index)
    {
        uint32_t err_code;

        if (m_tx_buffer[m_tx_index].type == READ_REQ)
        {
            err_code = sd_ble_gattc_read(m_tx_buffer[m_tx_index].conn_handle,
                                         m_tx_buffer[m_tx_index].req.read_handle,
                                         0);
        }
        else
        {
            err_code = sd_ble_gattc_write(m_tx_buffer[m_tx_index].conn_handle,
                                          &m_tx_buffer[m_tx_index].req.write_req.gattc_params);
        }
        if (err_code == NRF_SUCCESS)
        {
            NRF_LOG_DEBUG("SD Read/Write API returns Success..");
            m_tx_index++;
            m_tx_index &= TX_BUFFER_MASK;
        }
        else
        {
            NRF_LOG_DEBUG("SD Read/Write API returns error. This message sending will be "
                "attempted again..");
        }
    }
}


/**@brief Function for handling write response events.
 *
 * @param[in] p_ble_lbs_c Pointer to the Led Button Client structure.
 * @param[in] p_ble_evt   Pointer to the BLE event received.
 */
static void on_write_rsp(ble_lbs_c_t * p_ble_lbs_c, ble_evt_t const * p_ble_evt)
{
    // Check if the event if on the link for this instance
    if (p_ble_lbs_c->conn_handle != p_ble_evt->evt.gattc_evt.conn_handle)
    {
        return;
    }
    // Check if there is any message to be sent across to the peer and send it.
    tx_buffer_process();
}


/**@brief Function for handling Handle Value Notification received from the SoftDevice.
 *
 * @details This function will uses the Handle Value Notification received from the SoftDevice
 *          and checks if it is a notification of Button state from the peer. If
 *          it is, this function will decode the state of the button and send it to the
 *          application.
 *
 * @param[in] p_ble_lbs_c Pointer to the Led Button Client structure.
 * @param[in] p_ble_evt   Pointer to the BLE event received.
 */
static void on_hvx(ble_lbs_c_t * p_ble_lbs_c, ble_evt_t const * p_ble_evt)
{
    // Check if the event is on the link for this instance
    if (p_ble_lbs_c->conn_handle != p_ble_evt->evt.gattc_evt.conn_handle)
    {
        return;
    }
    // Check if this is a Button notification.
    if (p_ble_evt->evt.gattc_evt.params.hvx.handle == p_ble_lbs_c->peer_lbs_db.button_handle)
    {
        if (p_ble_evt->evt.gattc_evt.params.hvx.len == 1)
        {
            ble_lbs_c_evt_t ble_lbs_c_evt;

            ble_lbs_c_evt.evt_type                   = BLE_LBS_C_EVT_BUTTON_NOTIFICATION;
            ble_lbs_c_evt.conn_handle                = p_ble_lbs_c->conn_handle;
            ble_lbs_c_evt.params.button.button_state = p_ble_evt->evt.gattc_evt.params.hvx.data[0];
            p_ble_lbs_c->evt_handler(p_ble_lbs_c, &ble_lbs_c_evt);
        }
    }
}


/**@brief Function for handling Disconnected event received from the SoftDevice.
 *
 * @details This function check if the disconnect event is happening on the link
 *          associated with the current instance of the module, if so it will set its
 *          conn_handle to invalid.
 *
 * @param[in] p_ble_lbs_c Pointer to the Led Button Client structure.
 * @param[in] p_ble_evt   Pointer to the BLE event received.
 */
static void on_disconnected(ble_lbs_c_t * p_ble_lbs_c, ble_evt_t const * p_ble_evt)
{
    if (p_ble_lbs_c->conn_handle == p_ble_evt->evt.gap_evt.conn_handle)
    {
        p_ble_lbs_c->conn_handle                    = BLE_CONN_HANDLE_INVALID;
        p_ble_lbs_c->peer_lbs_db.button_cccd_handle = BLE_GATT_HANDLE_INVALID;
        p_ble_lbs_c->peer_lbs_db.button_handle      = BLE_GATT_HANDLE_INVALID;
        p_ble_lbs_c->peer_lbs_db.led_handle         = BLE_GATT_HANDLE_INVALID;
    }
}


void ble_lbs_on_db_disc_evt(ble_lbs_c_t * p_ble_lbs_c, ble_db_discovery_evt_t const * p_evt)
{
    // Check if the Led Button Service was discovered.
    
    if (p_evt->evt_type == BLE_DB_DISCOVERY_COMPLETE &&
        p_evt->params.discovered_db.srv_uuid.uuid == LBS_UUID_SERVICE &&
        p_evt->params.discovered_db.srv_uuid.type == p_ble_lbs_c->uuid_type)
    {
        ble_lbs_c_evt_t evt;

        evt.evt_type    = BLE_LBS_C_EVT_DISCOVERY_COMPLETE;
        evt.conn_handle = p_evt->conn_handle;

        for (uint32_t i = 0; i < p_evt->params.discovered_db.char_count; i++)
        {
            const ble_gatt_db_char_t * p_char = &(p_evt->params.discovered_db.charateristics[i]);
            switch (p_char->characteristic.uuid.uuid)
            {
                case LBS_UUID_LED_CHAR:
                    evt.params.peer_db.led_handle = p_char->characteristic.handle_value;
                    break;
                case LBS_UUID_BUTTON_CHAR:
                    evt.params.peer_db.button_handle      = p_char->characteristic.handle_value;
                    evt.params.peer_db.button_cccd_handle = p_char->cccd_handle;
                    break;

                default:
                    break;
            }
        }

        NRF_LOG_DEBUG("Led Button Service discovered at peer.");
        //If the instance has been assigned prior to db_discovery, assign the db_handles
        if (p_ble_lbs_c->conn_handle != BLE_CONN_HANDLE_INVALID)
        {
            if ((p_ble_lbs_c->peer_lbs_db.led_handle         == BLE_GATT_HANDLE_INVALID)&&
                (p_ble_lbs_c->peer_lbs_db.button_handle      == BLE_GATT_HANDLE_INVALID)&&
                (p_ble_lbs_c->peer_lbs_db.button_cccd_handle == BLE_GATT_HANDLE_INVALID))
            {
                p_ble_lbs_c->peer_lbs_db = evt.params.peer_db;
            }
        }

        p_ble_lbs_c->evt_handler(p_ble_lbs_c, &evt);

    }

     /*else if (p_evt->evt_type == BLE_DB_DISCOVERY_COMPLETE)
      {
        NRF_LOG_DEBUG("BLE_DB_DISCOVERY_COMPLETE.");
      }
    
     else if (p_evt->evt_type == BLE_DB_DISCOVERY_ERROR)
      {
        NRF_LOG_DEBUG("BLE_DB_DISCOVERY_ERROR.");
      }
       else if (p_evt->evt_type == BLE_DB_DISCOVERY_SRV_NOT_FOUND)
      {
        NRF_LOG_DEBUG("BLE_DB_DISCOVERY_SRV_NOT_FOUND.");
      }
    
     else if (p_evt->evt_type == BLE_DB_DISCOVERY_AVAILABLE)
      {
        NRF_LOG_DEBUG("BLE_DB_DISCOVERY_AVAILABLE."); 
      }  /**/
}


uint32_t ble_lbs_c_init(ble_lbs_c_t * p_ble_lbs_c, ble_lbs_c_init_t * p_ble_lbs_c_init)
{
    uint32_t      err_code;
    ble_uuid_t    lbs_uuid;
    ble_uuid128_t lbs_base_uuid = {LBS_UUID_BASE};

    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c);
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c_init);
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c_init->evt_handler);

    p_ble_lbs_c->peer_lbs_db.button_cccd_handle = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->peer_lbs_db.button_handle      = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->peer_lbs_db.led_handle         = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->conn_handle                    = BLE_CONN_HANDLE_INVALID;
    p_ble_lbs_c->evt_handler                    = p_ble_lbs_c_init->evt_handler;

    err_code = sd_ble_uuid_vs_add(&lbs_base_uuid, &p_ble_lbs_c->uuid_type);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    VERIFY_SUCCESS(err_code);

    lbs_uuid.type = p_ble_lbs_c->uuid_type;
    lbs_uuid.uuid = LBS_UUID_SERVICE;

    return ble_db_discovery_evt_register(&lbs_uuid);
}

void ble_lbs_c_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_context)
{
    if ((p_context == NULL) || (p_ble_evt == NULL))
    {
        return;
    }

    ble_lbs_c_t * p_ble_lbs_c = (ble_lbs_c_t *)p_context;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GATTC_EVT_HVX:
            on_hvx(p_ble_lbs_c, p_ble_evt);
            break;

        case BLE_GATTC_EVT_WRITE_RSP:
            on_write_rsp(p_ble_lbs_c, p_ble_evt);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            on_disconnected(p_ble_lbs_c, p_ble_evt);
            break;

        default:
            break;
    }
}


/**@brief Function for configuring the CCCD.
 *
 * @param[in] conn_handle The connection handle on which to configure the CCCD.
 * @param[in] handle_cccd The handle of the CCCD to be configured.
 * @param[in] enable      Whether to enable or disable the CCCD.
 *
 * @return NRF_SUCCESS if the CCCD configure was successfully sent to the peer.
 */
static uint32_t cccd_configure(uint16_t conn_handle, uint16_t handle_cccd, bool enable)
{
    NRF_LOG_DEBUG("Configuring CCCD. CCCD Handle = %d, Connection Handle = %d",
        handle_cccd,conn_handle);

    tx_message_t * p_msg;
    uint16_t       cccd_val = enable ? BLE_GATT_HVX_NOTIFICATION : 0;

    p_msg              = &m_tx_buffer[m_tx_insert_index++];
    m_tx_insert_index &= TX_BUFFER_MASK;

    p_msg->req.write_req.gattc_params.handle   = handle_cccd;
    p_msg->req.write_req.gattc_params.len      = WRITE_MESSAGE_LENGTH;
    p_msg->req.write_req.gattc_params.p_value  = p_msg->req.write_req.gattc_value;
    p_msg->req.write_req.gattc_params.offset   = 0;
    p_msg->req.write_req.gattc_params.write_op = BLE_GATT_OP_WRITE_REQ;
    p_msg->req.write_req.gattc_value[0]        = LSB_16(cccd_val);
    p_msg->req.write_req.gattc_value[1]        = MSB_16(cccd_val);
    p_msg->conn_handle                         = conn_handle;
    p_msg->type                                = WRITE_REQ;

    tx_buffer_process();
    return NRF_SUCCESS;
}


uint32_t ble_lbs_c_button_notif_enable(ble_lbs_c_t * p_ble_lbs_c)
{
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c);

    if (p_ble_lbs_c->conn_handle == BLE_CONN_HANDLE_INVALID)
    {
        return NRF_ERROR_INVALID_STATE;
    }

    return cccd_configure(p_ble_lbs_c->conn_handle,
                          p_ble_lbs_c->peer_lbs_db.button_cccd_handle,
                          true);
}


uint32_t ble_lbs_led_status_send(ble_lbs_c_t * p_ble_lbs_c, uint8_t status)
{
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c);

    if (p_ble_lbs_c->conn_handle == BLE_CONN_HANDLE_INVALID)
    {
        return NRF_ERROR_INVALID_STATE;
    }

    NRF_LOG_DEBUG("writing LED status 0x%x", status);

    tx_message_t * p_msg;

    p_msg              = &m_tx_buffer[m_tx_insert_index++];
    m_tx_insert_index &= TX_BUFFER_MASK;

    p_msg->req.write_req.gattc_params.handle   = p_ble_lbs_c->peer_lbs_db.led_handle;
    p_msg->req.write_req.gattc_params.len      = sizeof(status);
    p_msg->req.write_req.gattc_params.p_value  = p_msg->req.write_req.gattc_value;
    p_msg->req.write_req.gattc_params.offset   = 0;
    p_msg->req.write_req.gattc_params.write_op = BLE_GATT_OP_WRITE_CMD;
    p_msg->req.write_req.gattc_value[0]        = status;
    p_msg->conn_handle                         = p_ble_lbs_c->conn_handle;
    p_msg->type                                = WRITE_REQ;

    tx_buffer_process();
    return NRF_SUCCESS;
}

uint32_t ble_lbs_c_handles_assign(ble_lbs_c_t    * p_ble_lbs_c,
                                  uint16_t         conn_handle,
                                  const lbs_db_t * p_peer_handles)
{
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c);

    p_ble_lbs_c->conn_handle = conn_handle;
    if (p_peer_handles != NULL)
    {
        p_ble_lbs_c->peer_lbs_db = *p_peer_handles;
    }
    return NRF_SUCCESS;
}

#endif // NRF_MODULE_ENABLED(BLE_LBS_C)

6237.ble_lbs_c.h

And what do you mean by debug build target from SES? 

[Einar Thorsrud]

Hi,

For the ble_lbs_c.c there are no changes from SDK 15.3 except some uncommented cocde. For the ble_lbs_c.h you have modified the UUID and that is the only change in the lbs service implementation, and that does not cause an error.

When it comes to your main.c file it uses things that are not defined. Where is BLE_UUID_XYLEM_PRES_SERVICE? Here I clearly need a modified SES project that includes the lbs_c service and a sdk_config.h that sets BLE_LBS_C_ENABLED to 1. Please make sure in the future to provide all your changes so that it can be easily reproduced.

If I fix the above three problems the project builds. Then I test and get an error. However, I always test with the Debug build, as should you. You select the debug build target like this:

so the error message looks like this:

<error> app: ERROR 4 [NRF_ERROR_NO_MEM] at C:\Users\eith\SDK\nRF5_SDK_15.3.0_59ac345\examples\ble_central\ble_app_rscs_c\main.c:771
PC at: 0x00030287
<error> app: End of error report

which is much more informative then what you get with the Release build:

<error> app: Fatal error

From the error I see that you get NRF_ERROR_NO_MEM at line 771, so that is the return value from ble_lbs_c_init(). This adds a new vendor specific UUID base so it is reasonable to think that the problem is that you need to increase NRF_SDH_BLE_VS_UUID_COUNT from 0 to 1 in sdk_config.h. Do that, and test again.

Now we get another error, which is expected as the change increased the SoftDevice memory usage:

<error> nrf_sdh_ble: sd_ble_enable() returned NRF_ERROR_NO_MEM.
<error> app: ERROR 4 [NRF_ERROR_NO_MEM] at C:\Users\eith\SDK\nRF5_SDK_15.3.0_59ac345\examples\ble_central\ble_app_rscs_c\main.c:401
PC at: 0x0002FA13
<error> app: End of error report

So you try to set the app RAM start address a bit higher and reduce the size accordingly, by the approach described in this tutorial:

After changing the log configuration defines as described under step 8. in the tutorial above, you get this log output:

<debug> nrf_sdh: State request: 0x00000000
<debug> nrf_sdh: Notify observer 0x0003B3F8 => ready
<debug> nrf_sdh: State change: 0x00000000
<debug> nrf_sdh: State change: 0x00000001
<warning> nrf_sdh_ble: Insufficient RAM allocated for the SoftDevice.
<warning> nrf_sdh_ble: Change the RAM start location from 0x20001CD0 to 0x20001CE0.
<warning> nrf_sdh_ble: Maximum RAM size for application is 0x3E320.
<error> nrf_sdh_ble: sd_ble_enable() returned NRF_ERROR_NO_MEM.
401
PC at: 0x0002FA8F

This tells us the correct RAM start address and size for the current SoftDevice configuration (after we adjusted NRF_SDH_BLE_VS_UUID_COUNT). Update it like this:

And now it all works.

Please note that these are all generic concepts with the nRF5 SDK and SoftDevice, so it makes sense to play a bit with it to understand how the SDK and SoftDevice works. Spending some time on these basics will save you time in the end.

[Vipul2988]

Hi Einar,

You are right about the debug build instead of release build. Appreciate your help and guidance.

I was able to reproduce all error above you mentioned. 

And after correcting all of them it was connecting to the Custom 128bit UUID service and showing DB_DISCOVERY_COMPLETE.

But  my end goal is to read value of Characteristic which has different 128 bit UUID Base than service 128 bit UUID.

how we can add different 128bit characteristic UUID. as in ble_lbs_c.h allow us to add only 16 bit characteristic UUID only.

[Einar Thorsrud]

Hi, 

Vipul2988 said:

how we can add different 128bit characteristic UUID. as in ble_lbs_c.h allow us to add only 16 bit characteristic UUID only.

In fact, the LBS is also a 128 bit characteristic, so you should do exactly as demonstrated there. The way it works is that you create a base UUID (referred to as uuid_type). So when you make a new base UUID, that is referred to by the type. When you then make a new characteristic and refer to the type of the base UUID, you only provide the extra 2 bytes / 16 bit, that are combined with the base UUID of the type to make the 128 bit UUID.

[Vipul2988]

HI Einar,

When I am trying to connect only service with 128bit UUID it is found and connected.

But when I am adding another 128bit UUID for Characteristics in ble_lbs_c_init() function, it is not giving any error but also not connecting to service and characteristics.

Please find attached zip file and open ble_central example. 

 

nRF5_SDK_15.3.0.zip

[Einar Thorsrud]

Hi,

I did not understand exactly what you meant, can you elaborate?

In any case I see something which does not look correct. You have two calls to sd_ble_uuid_vs_add() where you try to add two bases. But the ID is output to the same variable (&p_ble_lbs_c->uuid_type), so the first is overwritten. And then cannot be used. Please double check the code so that you avoid suck mistakes.

(Another detail I see is that you ignore the return value of the fist call to sd_ble_uuid_vs_add(). While it does not fail in this case, ignoring return value is never a good idea and typically prevents you from discovering issues early).

[Vipul2988]

HI Einar,

I means to say whey I am serching services with only 128bit base, it is working good.

but as and when I tried to add characteristics with diffferent128 bit, I am not getting any output and Error as well.   

Can you suggest how my ble_lbs_c_init() function should look like ?

uint32_t ble_lbs_c_init(ble_lbs_c_t * p_ble_lbs_c, ble_lbs_c_init_t * p_ble_lbs_c_init)
{
    uint32_t      err_code;

    ble_uuid_t    lbs_uuid;
    ble_uuid128_t lbs_base_uuid = {PRESS_SER_UUID_BASE};
    ble_uuid_t    lbs_char_uuid;
    ble_uuid128_t lbs_char_base_uuid = {PRESS_CHAR_UUID_BASE};

    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c);
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c_init);
    VERIFY_PARAM_NOT_NULL(p_ble_lbs_c_init->evt_handler);

    p_ble_lbs_c->peer_lbs_db.button_cccd_handle = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->peer_lbs_db.button_handle      = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->peer_lbs_db.led_handle         = BLE_GATT_HANDLE_INVALID;
    p_ble_lbs_c->conn_handle                    = BLE_CONN_HANDLE_INVALID;
    p_ble_lbs_c->evt_handler                    = p_ble_lbs_c_init->evt_handler;

    err_code = sd_ble_uuid_vs_add(&lbs_base_uuid, &p_ble_lbs_c->uuid_type);
    err_code = sd_ble_uuid_vs_add(&lbs_char_base_uuid, &p_ble_lbs_c->uuid_type);

    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    VERIFY_SUCCESS(err_code);

   lbs_uuid.type = p_ble_lbs_c->uuid_type;
   lbs_uuid.uuid = LBS_UUID_SERVICE;

    //lbs_uuid.type = p_ble_lbs_c->uuid_type;
    //lbs_uuid.uuid = PRESS_SER_UUID;

    lbs_char_uuid.type = p_ble_lbs_c->uuid_type;
    lbs_char_uuid.uuid = PRESS_CHAR_UUID;

    return ble_db_discovery_evt_register(&lbs_uuid);
    return ble_db_discovery_evt_register(&lbs_char_uuid);
}