mqtt_simple example: mqtt_connect error -12

[Chrisiot]

Hello everyone,

I started an evaluation for the Nordic Thingy91 using the "mqtt_simple" example from the SDK1.6.0 version. The Thingy91 is HW-version 1.4.0. Programming is done in SES V5.50c.

The standard-example works (which connects to mqtt.eclipseprojects.io).

I tried to connect to another server without a username and a password and it also worked as intended. I did this by changing the "MQTT_BROKER_HOSTNAME" in Kconfig and the "CONFIG_MQTT_BROKER_HOSTNAME" in prj.conf. I know, only the prj.conf needs to be changed, I changed both to be sure.

Then I changed the host a server which need a specific username or a password. TLS is not used.

I added the username and password in the main.c:

The result is  "mqtt_connect -12":

I found this topic (mqtt connect error - Nordic Q&A - Nordic DevZone - Nordic DevZone (nordicsemi.com))  and increased the buffer size in the prj.conf and Kconfig to 512:

CONFIG_MQTT_MESSAGE_BUFFER_SIZE=512
CONFIG_MQTT_PAYLOAD_BUFFER_SIZE=512

In the mentioned topic, the connect error -12 was solved by increasing buffer sizes. For me, the problem persisted, as shown in the second picture.

What can I do to find the error?

With other MQTT Clients I can connect to the server using the same username and password,

[Øyvind]

Hello, 

Error -12 means #define ENOMEM 12 /* Not enough core */ and usually seen when there are no sockets available. Could you please share your project i.e. prj.conf and main.c? Please remember to change username and password in the file.

Kind regards,
Øyvind

[Chrisiot]

0250.prj.conf

Fullscreen 8272.CMakeLists.txt Download

#
# Copyright (c) 2018 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

cmake_minimum_required(VERSION 3.13.1)

find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
project(mqtt-simple)

# NORDIC SDK APP START
target_sources(app PRIVATE src/main.c)
# NORDIC SDK APP END

Fullscreen 6138.main.c Download

/*
 * Copyright (c) 2018 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
 */

#include <zephyr.h>
#include <stdio.h>
#include <drivers/uart.h>
#include <string.h>
#include <random/rand32.h>
#include <net/mqtt.h>
#include <net/socket.h>
#include <modem/at_cmd.h>
#include <modem/lte_lc.h>
#include <logging/log.h>
#if defined(CONFIG_MODEM_KEY_MGMT)
#include <modem/modem_key_mgmt.h>
#endif
#if defined(CONFIG_LWM2M_CARRIER)
#include <lwm2m_carrier.h>
#endif
#include <dk_buttons_and_leds.h>

#include "certificates.h"

LOG_MODULE_REGISTER(mqtt_simple, CONFIG_MQTT_SIMPLE_LOG_LEVEL);

/* Buffers for MQTT client. */
static uint8_t rx_buffer[CONFIG_MQTT_MESSAGE_BUFFER_SIZE];
static uint8_t tx_buffer[CONFIG_MQTT_MESSAGE_BUFFER_SIZE];
static uint8_t payload_buf[CONFIG_MQTT_PAYLOAD_BUFFER_SIZE];

/* The mqtt client struct */
static struct mqtt_client client;

/* MQTT Broker details. */
static struct sockaddr_storage broker;

/* File descriptor */
static struct pollfd fds;

#if defined(CONFIG_MQTT_LIB_TLS)
static int certificates_provision(void)
{
	int err = 0;

	LOG_INF("Provisioning certificates");

#if defined(CONFIG_NRF_MODEM_LIB) && defined(CONFIG_MODEM_KEY_MGMT)

	err = modem_key_mgmt_write(CONFIG_MQTT_TLS_SEC_TAG,
				   MODEM_KEY_MGMT_CRED_TYPE_CA_CHAIN,
				   CA_CERTIFICATE,
				   strlen(CA_CERTIFICATE));
	if (err) {
		LOG_ERR("Failed to provision CA certificate: %d", err);
		return err;
	}

#elif defined(CONFIG_BOARD_QEMU_X86) && defined(CONFIG_NET_SOCKETS_SOCKOPT_TLS)

	err = tls_credential_add(CONFIG_MQTT_TLS_SEC_TAG,
				 TLS_CREDENTIAL_CA_CERTIFICATE,
				 CA_CERTIFICATE,
				 sizeof(CA_CERTIFICATE));
	if (err) {
		LOG_ERR("Failed to register CA certificate: %d", err);
		return err;
	}

#endif

	return err;
}
#endif /* defined(CONFIG_MQTT_LIB_TLS) */

#if defined(CONFIG_NRF_MODEM_LIB)

/**@brief Recoverable modem library error. */
void nrf_modem_recoverable_error_handler(uint32_t err)
{
	LOG_ERR("Modem library recoverable error: %u", (unsigned int)err);
}

#endif /* defined(CONFIG_NRF_MODEM_LIB) */

#if defined(CONFIG_LWM2M_CARRIER)
K_SEM_DEFINE(carrier_registered, 0, 1);
int lwm2m_carrier_event_handler(const lwm2m_carrier_event_t *event)
{
	switch (event->type) {
	case LWM2M_CARRIER_EVENT_BSDLIB_INIT:
		LOG_INF("LWM2M_CARRIER_EVENT_BSDLIB_INIT");
		break;
	case LWM2M_CARRIER_EVENT_CONNECTING:
		LOG_INF("LWM2M_CARRIER_EVENT_CONNECTING");
		break;
	case LWM2M_CARRIER_EVENT_CONNECTED:
		LOG_INF("LWM2M_CARRIER_EVENT_CONNECTED");
		break;
	case LWM2M_CARRIER_EVENT_DISCONNECTING:
		LOG_INF("LWM2M_CARRIER_EVENT_DISCONNECTING");
		break;
	case LWM2M_CARRIER_EVENT_DISCONNECTED:
		LOG_INF("LWM2M_CARRIER_EVENT_DISCONNECTED");
		break;
	case LWM2M_CARRIER_EVENT_BOOTSTRAPPED:
		LOG_INF("LWM2M_CARRIER_EVENT_BOOTSTRAPPED");
		break;
	case LWM2M_CARRIER_EVENT_REGISTERED:
		LOG_INF("LWM2M_CARRIER_EVENT_REGISTERED");
		k_sem_give(&carrier_registered);
		break;
	case LWM2M_CARRIER_EVENT_DEFERRED:
		LOG_INF("LWM2M_CARRIER_EVENT_DEFERRED");
		break;
	case LWM2M_CARRIER_EVENT_FOTA_START:
		LOG_INF("LWM2M_CARRIER_EVENT_FOTA_START");
		break;
	case LWM2M_CARRIER_EVENT_REBOOT:
		LOG_INF("LWM2M_CARRIER_EVENT_REBOOT");
		break;
	case LWM2M_CARRIER_EVENT_LTE_READY:
		LOG_INF("LWM2M_CARRIER_EVENT_LTE_READY");
		break;
	case LWM2M_CARRIER_EVENT_ERROR:
		LOG_ERR("LWM2M_CARRIER_EVENT_ERROR: code %d, value %d",
			((lwm2m_carrier_event_error_t *)event->data)->code,
			((lwm2m_carrier_event_error_t *)event->data)->value);
		break;
	default:
		LOG_WRN("Unhandled LWM2M_CARRIER_EVENT: %d", event->type);
		break;
	}

	return 0;
}
#endif /* defined(CONFIG_LWM2M_CARRIER) */

/**@brief Function to print strings without null-termination
 */
static void data_print(uint8_t *prefix, uint8_t *data, size_t len)
{
	char buf[len + 1];

	memcpy(buf, data, len);
	buf[len] = 0;
	LOG_INF("%s%s", log_strdup(prefix), log_strdup(buf));
}

/**@brief Function to publish data on the configured topic
 */
static int data_publish(struct mqtt_client *c, enum mqtt_qos qos,
	uint8_t *data, size_t len)
{
	struct mqtt_publish_param param;

	param.message.topic.qos = qos;
	param.message.topic.topic.utf8 = CONFIG_MQTT_PUB_TOPIC;
	param.message.topic.topic.size = strlen(CONFIG_MQTT_PUB_TOPIC);
	param.message.payload.data = data;
	param.message.payload.len = len;
	param.message_id = sys_rand32_get();
	param.dup_flag = 0;
	param.retain_flag = 0;

	data_print("Publishing: ", data, len);
	LOG_INF("to topic: %s len: %u",
		CONFIG_MQTT_PUB_TOPIC,
		(unsigned int)strlen(CONFIG_MQTT_PUB_TOPIC));

	return mqtt_publish(c, &param);
}

/**@brief Function to subscribe to the configured topic
 */
static int subscribe(void)
{
	struct mqtt_topic subscribe_topic = {
		.topic = {
			.utf8 = CONFIG_MQTT_SUB_TOPIC,
			.size = strlen(CONFIG_MQTT_SUB_TOPIC)
		},
		.qos = MQTT_QOS_1_AT_LEAST_ONCE
	};

	const struct mqtt_subscription_list subscription_list = {
		.list = &subscribe_topic,
		.list_count = 1,
		.message_id = 1234
	};

	LOG_INF("Subscribing to: %s len %u", CONFIG_MQTT_SUB_TOPIC,
		(unsigned int)strlen(CONFIG_MQTT_SUB_TOPIC));

	return mqtt_subscribe(&client, &subscription_list);
}

/**@brief Function to read the published payload.
 */
static int publish_get_payload(struct mqtt_client *c, size_t length)
{
	if (length > sizeof(payload_buf)) {
		return -EMSGSIZE;
	}

	return mqtt_readall_publish_payload(c, payload_buf, length);
}

/**@brief MQTT client event handler
 */
void mqtt_evt_handler(struct mqtt_client *const c,
		      const struct mqtt_evt *evt)
{
	int err;

	switch (evt->type) {
	case MQTT_EVT_CONNACK:
		if (evt->result != 0) {
			LOG_ERR("MQTT connect failed: %d", evt->result);
			break;
		}

		LOG_INF("MQTT client connected");
		subscribe();
		break;

	case MQTT_EVT_DISCONNECT:
		LOG_INF("MQTT client disconnected: %d", evt->result);
		break;

	case MQTT_EVT_PUBLISH: {
		const struct mqtt_publish_param *p = &evt->param.publish;

		LOG_INF("MQTT PUBLISH result=%d len=%d",
			evt->result, p->message.payload.len);
		err = publish_get_payload(c, p->message.payload.len);

		if (p->message.topic.qos == MQTT_QOS_1_AT_LEAST_ONCE) {
			const struct mqtt_puback_param ack = {
				.message_id = p->message_id
			};

			/* Send acknowledgment. */
			mqtt_publish_qos1_ack(&client, &ack);
		}

		if (err >= 0) {
			data_print("Received: ", payload_buf,
				p->message.payload.len);
			/* Echo back received data */
			data_publish(&client, MQTT_QOS_1_AT_LEAST_ONCE,
				payload_buf, p->message.payload.len);
		} else {
			LOG_ERR("publish_get_payload failed: %d", err);
			LOG_INF("Disconnecting MQTT client...");

			err = mqtt_disconnect(c);
			if (err) {
				LOG_ERR("Could not disconnect: %d", err);
			}
		}
	} break;

	case MQTT_EVT_PUBACK:
		if (evt->result != 0) {
			LOG_ERR("MQTT PUBACK error: %d", evt->result);
			break;
		}

		LOG_INF("PUBACK packet id: %u", evt->param.puback.message_id);
		break;

	case MQTT_EVT_SUBACK:
		if (evt->result != 0) {
			LOG_ERR("MQTT SUBACK error: %d", evt->result);
			break;
		}

		LOG_INF("SUBACK packet id: %u", evt->param.suback.message_id);
		break;

	case MQTT_EVT_PINGRESP:
		if (evt->result != 0) {
			LOG_ERR("MQTT PINGRESP error: %d", evt->result);
		}
		break;

	default:
		LOG_INF("Unhandled MQTT event type: %d", evt->type);
		break;
	}
}

/**@brief Resolves the configured hostname and
 * initializes the MQTT broker structure
 */
static int broker_init(void)
{
	int err;
	struct addrinfo *result;
	struct addrinfo *addr;
	struct addrinfo hints = {
		.ai_family = AF_INET,
		.ai_socktype = SOCK_STREAM
	};

	err = getaddrinfo(CONFIG_MQTT_BROKER_HOSTNAME, NULL, &hints, &result);
	if (err) {
		LOG_ERR("getaddrinfo failed: %d", err);
		return -ECHILD;
	}

	addr = result;

	/* Look for address of the broker. */
	while (addr != NULL) {
		/* IPv4 Address. */
		if (addr->ai_addrlen == sizeof(struct sockaddr_in)) {
			struct sockaddr_in *broker4 =
				((struct sockaddr_in *)&broker);
			char ipv4_addr[NET_IPV4_ADDR_LEN];

			broker4->sin_addr.s_addr =
				((struct sockaddr_in *)addr->ai_addr)
				->sin_addr.s_addr;
			broker4->sin_family = AF_INET;
			broker4->sin_port = htons(CONFIG_MQTT_BROKER_PORT);

			inet_ntop(AF_INET, &broker4->sin_addr.s_addr,
				  ipv4_addr, sizeof(ipv4_addr));
			LOG_INF("IPv4 Address found %s", log_strdup(ipv4_addr));

			break;
		} else {
			LOG_ERR("ai_addrlen = %u should be %u or %u",
				(unsigned int)addr->ai_addrlen,
				(unsigned int)sizeof(struct sockaddr_in),
				(unsigned int)sizeof(struct sockaddr_in6));
		}

		addr = addr->ai_next;
	}

	/* Free the address. */
	freeaddrinfo(result);

	return err;
}

#if defined(CONFIG_NRF_MODEM_LIB)
#define IMEI_LEN 15
#define CGSN_RESPONSE_LENGTH 19
#define CLIENT_ID_LEN sizeof("nrf-") + IMEI_LEN
#else
#define RANDOM_LEN 10
#define CLIENT_ID_LEN sizeof(CONFIG_BOARD) + 1 + RANDOM_LEN
#endif /* defined(CONFIG_NRF_MODEM_LIB) */

/* Function to get the client id */
static const uint8_t* client_id_get(void)
{
	static uint8_t client_id[MAX(sizeof(CONFIG_MQTT_CLIENT_ID),
				     CLIENT_ID_LEN)];

	if (strlen(CONFIG_MQTT_CLIENT_ID) > 0) {
		snprintf(client_id, sizeof(client_id), "%s",
			 CONFIG_MQTT_CLIENT_ID);
		goto exit;
	}

#if defined(CONFIG_NRF_MODEM_LIB)
	char imei_buf[CGSN_RESPONSE_LENGTH + 1];
	int err;

	if (!IS_ENABLED(CONFIG_AT_CMD_SYS_INIT)) {
		err = at_cmd_init();
		if (err) {
			LOG_ERR("at_cmd failed to initialize, error: %d", err);
			goto exit;
		}
	}

	err = at_cmd_write("AT+CGSN", imei_buf, sizeof(imei_buf), NULL);
	if (err) {
		LOG_ERR("Failed to obtain IMEI, error: %d", err);
		goto exit;
	}

	imei_buf[IMEI_LEN] = '\0';

	snprintf(client_id, sizeof(client_id), "nrf-%.*s", IMEI_LEN, imei_buf);
#else
	uint32_t id = sys_rand32_get();
	snprintf(client_id, sizeof(client_id), "%s-%010u", CONFIG_BOARD, id);
#endif /* !defined(NRF_CLOUD_CLIENT_ID) */

exit:
	LOG_DBG("client_id = %s", log_strdup(client_id));

	return client_id;
}

/**@brief Initialize the MQTT client structure
 */
static int client_init(struct mqtt_client *client)
{
	int err;

	mqtt_client_init(client);

	err = broker_init();
	if (err) {
		LOG_ERR("Failed to initialize broker connection");
		return err;
	}

	/* MQTT client configuration */
	client->broker = &broker;
	client->evt_cb = mqtt_evt_handler;
	client->client_id.utf8 = client_id_get();
	client->client_id.size = strlen(client->client_id.utf8);
        client->password = "user"; // CONFIG_MQTT_BROKER_USERNAME;
        client->user_name = "password";// CONFIG_MQTT_BROKER_PASSWORD;
	client->protocol_version = MQTT_VERSION_3_1_1;

	/* MQTT buffers configuration */
	client->rx_buf = rx_buffer;
	client->rx_buf_size = sizeof(rx_buffer);
	client->tx_buf = tx_buffer;
	client->tx_buf_size = sizeof(tx_buffer);

	/* MQTT transport configuration */
#if defined(CONFIG_MQTT_LIB_TLS)
	struct mqtt_sec_config *tls_cfg = &(client->transport).tls.config;
	static sec_tag_t sec_tag_list[] = { CONFIG_MQTT_TLS_SEC_TAG };

	LOG_INF("TLS enabled");
	client->transport.type = MQTT_TRANSPORT_SECURE;

	tls_cfg->peer_verify = CONFIG_MQTT_TLS_PEER_VERIFY;
	tls_cfg->cipher_count = 0;
	tls_cfg->cipher_list = NULL;
	tls_cfg->sec_tag_count = ARRAY_SIZE(sec_tag_list);
	tls_cfg->sec_tag_list = sec_tag_list;
	tls_cfg->hostname = CONFIG_MQTT_BROKER_HOSTNAME;

#if defined(CONFIG_NRF_MODEM_LIB)
	tls_cfg->session_cache = IS_ENABLED(CONFIG_MQTT_TLS_SESSION_CACHING) ?
					    TLS_SESSION_CACHE_ENABLED :
					    TLS_SESSION_CACHE_DISABLED;
#else
	/* TLS session caching is not supported by the Zephyr network stack */
	tls_cfg->session_cache = TLS_SESSION_CACHE_DISABLED;

#endif

#else
	client->transport.type = MQTT_TRANSPORT_NON_SECURE;
#endif

	return err;
}

/**@brief Initialize the file descriptor structure used by poll.
 */
static int fds_init(struct mqtt_client *c)
{
	if (c->transport.type == MQTT_TRANSPORT_NON_SECURE) {
		fds.fd = c->transport.tcp.sock;
	} else {
#if defined(CONFIG_MQTT_LIB_TLS)
		fds.fd = c->transport.tls.sock;
#else
		return -ENOTSUP;
#endif
	}

	fds.events = POLLIN;

	return 0;
}

#if defined(CONFIG_DK_LIBRARY)
static void button_handler(uint32_t button_states, uint32_t has_changed)
{
	if (has_changed & button_states &
	    BIT(CONFIG_BUTTON_EVENT_BTN_NUM - 1)) {
		int ret;

		ret = data_publish(&client,
				   MQTT_QOS_1_AT_LEAST_ONCE,
				   CONFIG_BUTTON_EVENT_PUBLISH_MSG,
				   sizeof(CONFIG_BUTTON_EVENT_PUBLISH_MSG)-1);
		if (ret) {
			LOG_ERR("Publish failed: %d", ret);
		}
	}
}
#endif

/**@brief Configures modem to provide LTE link. Blocks until link is
 * successfully established.
 */
static int modem_configure(void)
{
#if defined(CONFIG_LTE_LINK_CONTROL)
	/* Turn off LTE power saving features for a more responsive demo. Also,
	 * request power saving features before network registration. Some
	 * networks rejects timer updates after the device has registered to the
	 * LTE network.
	 */
	LOG_INF("Disabling PSM and eDRX");
	lte_lc_psm_req(false);
	lte_lc_edrx_req(false);

	if (IS_ENABLED(CONFIG_LTE_AUTO_INIT_AND_CONNECT)) {
		/* Do nothing, modem is already turned on
		 * and connected.
		 */
	} else {
#if defined(CONFIG_LWM2M_CARRIER)
		/* Wait for the LWM2M_CARRIER to configure the modem and
		 * start the connection.
		 */
		LOG_INF("Waitng for carrier registration...");
		k_sem_take(&carrier_registered, K_FOREVER);
		LOG_INF("Registered!");
#else /* defined(CONFIG_LWM2M_CARRIER) */
		int err;

		LOG_INF("LTE Link Connecting...");
		err = lte_lc_init_and_connect();
		if (err) {
			LOG_INF("Failed to establish LTE connection: %d", err);
			return err;
		}
		LOG_INF("LTE Link Connected!");
#endif /* defined(CONFIG_LWM2M_CARRIER) */
	}
#endif /* defined(CONFIG_LTE_LINK_CONTROL) */

	return 0;
}

void main(void)
{
	int err;
	uint32_t connect_attempt = 0;

	LOG_INF("The MQTT simple sample started");

#if defined(CONFIG_MQTT_LIB_TLS)
	err = certificates_provision();
	if (err != 0) {
		LOG_ERR("Failed to provision certificates");
		return;
	}
#endif /* defined(CONFIG_MQTT_LIB_TLS) */

	do {
		err = modem_configure();
		if (err) {
			LOG_INF("Retrying in %d seconds",
				CONFIG_LTE_CONNECT_RETRY_DELAY_S);
			k_sleep(K_SECONDS(CONFIG_LTE_CONNECT_RETRY_DELAY_S));
		}
	} while (err);

	err = client_init(&client);
	if (err != 0) {
		LOG_ERR("client_init: %d", err);
		return;
	}

#if defined(CONFIG_DK_LIBRARY)
	dk_buttons_init(button_handler);
#endif

do_connect:
	if (connect_attempt++ > 0) {
		LOG_INF("Reconnecting in %d seconds...",
			CONFIG_MQTT_RECONNECT_DELAY_S);
		k_sleep(K_SECONDS(CONFIG_MQTT_RECONNECT_DELAY_S));
	}
	err = mqtt_connect(&client);
	if (err != 0) {
		LOG_ERR("mqtt_connect %d", err);
		goto do_connect;
	}

	err = fds_init(&client);
	if (err != 0) {
		LOG_ERR("fds_init: %d", err);
		return;
	}

	while (1) {
		err = poll(&fds, 1, mqtt_keepalive_time_left(&client));
		if (err < 0) {
			LOG_ERR("poll: %d", errno);
			break;
		}

		err = mqtt_live(&client);
		if ((err != 0) && (err != -EAGAIN)) {
			LOG_ERR("ERROR: mqtt_live: %d", err);
			break;
		}

		if ((fds.revents & POLLIN) == POLLIN) {
			err = mqtt_input(&client);
			if (err != 0) {
				LOG_ERR("mqtt_input: %d", err);
				break;
			}
		}

		if ((fds.revents & POLLERR) == POLLERR) {
			LOG_ERR("POLLERR");
			break;
		}

		if ((fds.revents & POLLNVAL) == POLLNVAL) {
			LOG_ERR("POLLNVAL");
			break;
		}
	}

	LOG_INF("Disconnecting MQTT client...");

	err = mqtt_disconnect(&client);
	if (err) {
		LOG_ERR("Could not disconnect MQTT client: %d", err);
	}
	goto do_connect;
}

Fullscreen 7608.Kconfig.txt Download

#
# Copyright (c) 2020 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

menu "MQTT simple sample"
config MQTT_PUB_TOPIC
	string "MQTT publish topic"
	default "chrisiot/publish/topic"

config MQTT_SUB_TOPIC
	string "MQTT subscribe topic"
	default "chrisiot/subscribe/topic"

config MQTT_CLIENT_ID
	string "MQTT Client ID"
	help
	  Use a custom Client ID string. If not set, the client ID will be
	  generated based on IMEI number (for nRF9160 based targets) or
	  randomly (for other platforms).
	default "chrisiot_Thingy91_01"

config MQTT_BROKER_HOSTNAME
	string "MQTT broker hostname"
	default "xxx.xxx.xxx.xxx"

config MQTT_BROKER_PORT
	int "MQTT broker port"
	default 1883

config MQTT_MESSAGE_BUFFER_SIZE
	int "MQTT message buffer size"
	default 512

config MQTT_PAYLOAD_BUFFER_SIZE
	int "MQTT payload buffer size"
	default 512
	
config MQTT_BROKER_USERNAME
	string "MQTT broker username"
	default "user"

config MQTT_BROKER_PASSWORD
	string "MQTT broker password"
default "password"

config BUTTON_EVENT_PUBLISH_MSG
	string "The message to publish on a button event"
	default "Hello from nRF91 MQTT Simple Sample"

config BUTTON_EVENT_BTN_NUM
	int "The button number"
	default 1

config MQTT_RECONNECT_DELAY_S
	int "Seconds to delay before attempting to reconnect to the broker."
	default 60

config LTE_CONNECT_RETRY_DELAY_S
	int "Seconds to delay before attempting to retry LTE connection."
	default 120

config MQTT_TLS_SEC_TAG
	int "TLS credentials security tag"
	default 24

config MQTT_TLS_SESSION_CACHING
	bool "Enable TLS session caching"

config MQTT_TLS_PEER_VERIFY
	int "Set peer verification level"
	default 2
	help
		Set to 0 for VERIFY_NONE, 1 for VERIFY_OPTIONAL, and 2 for
		VERIFY_REQUIRED.

endmenu

menu "Zephyr Kernel"
source "Kconfig.zephyr"
endmenu

module = MQTT_SIMPLE
module-str = MQTT Simple
source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"

Dear Øyvind,

thank you for your answer. Above, I have attached the main.c, the Kconfig (I had to add.txt, so I could upload the file), the prj.conf and CMakeLists.txt.

Please let me know, if I can provide more information.

Have a good day,

Chris

[Chrisiot]

Dear Øyvind,

I would like to add an information to avoid confusion:

in my uploaded main.c, the user is entered in the password field and the password is entered in the user field. In the main.c that I use for building, the correct information is entered. Nevertheless, the output is the same:

Have a good day,

Chris

[Øyvind]

Hi Chris, 

I've discussed the issue with one of our developers. You need to add the size of each as well:

client->password->utf8 = "user";
client->password->size = strlen("user");
client->user_name->utf8 = "password";
client->user_name->size = strlen("password");

Let me know how that works for you. 

Kind regards,
Øyvind

[Chrisiot]

Dear Øyvind,

I set the username and password as suggested by you in the main.c. 

After starting the debug and running the program, the serial console shows:

After a minute, the debugger stops here:

When I press "Continue Execution" in SES the first time, the debugger stops at the same code position immediately. When pressing "Continue Execution" again a second time, a minute later, the debugger stops at the same position again. When I continue execution a third time, the debugger stops there again, but the serial console is updated:

At this point, the error seems to be reproducible.

I am happy to try out more ideas, just let me know,

Chris