how to update HIC,LMP,Bluetooth controller

[yoyou]

Hello,Vidar Berg

the Posts had closed,so i can't reply.

nRFConnect SDK Sample not working (periodic_adv _sync) - Nordic Q&A - Nordic DevZone - Nordic DevZone (nordicsemi.com)

i test your 6201.periodic_sync.zip  5706.periodic_adv.zip ,it work well.

i copy your .config_periodic_sync's configs to ncs1.8.0 or ncs1.7.1/periodic_sync/prj.conf ,it Compilation failed with many errors.

i compare your log output, my HCI and LMP version is 5.2, Bluetooth controller (0x00) Version 223.20160.

but see your log output，your HCI and LMP version is 5.3, Bluetooth controller (0x00) Version 2.7.

how to update it?

and can you upload your periodic_sync full folder here？I want to learn it.

i install by Toolchain Manager v0.9.3

thank a lot

[Vidar Berg]

Hello,

Sure, here are the projects I built with SDK 1.8.0:

- 3426.periodic_sync.zip

- 3021.periodic_adv.zip

Note that the only modification I made was to add CONFIG_BT_LL_SW_SPLIT=y to the prj.conf files.

I suggest you try to build them from the command line if you still get the same result with these (i.e. Softdevice controller gets selected instead of zephyr) as a way to narrow down the problem. Maybe Segger Embedded studio is pointing to the wrong SDK version?

Building from the command line:

 1. Open the windows command line from the toolchain manager

2. cd to the project you want to build

3. Run west to build and flash the sample

4. Open a UART terminal to view the log output.

[yoyou]

Hello,Vidar Berg,

thank you wery much,

from cmd, it work well,

but another question is, periodic_adv data lenght max 62,how to chang to big than 120 or 240?

i've try change 60 to 61 or biger,got error:

[Vidar Berg]

Hello,

I see the same here when I try to increase payload to more than 60 bytes, unfortunately. I suspect the limitation is in the Zephyr controller. That's where the error is returned from at least. Periodic advertising is still an experimental feature for both controllers, but I'm not sure if this is one of the known limitations with it. I will need to confirm it with the developers.

[yoyou]

Hello,

i reinstall NCS1.8.0,it work well.

thanks