unable to provision with INSTABURST enabled

[Ashishsult]

Hi,

I started to evaluate the Instaburst feature. I use light_switch_client example, but I am unable to provision the device once I enable this feature. 

Below are the logs.

[Mttrinh]

Hi, 

Have you made any other changes to the example other than enable the instaburst feature?

Did you check out Nordic Advertiser Extensions (Instaburst) documentation?

[Mttrinh]

Do you get any error codes? From you log, it looks like the device is provisioned succesfully: "Succesfully provisioned".

Which Mesh SDK version are you using?

[Ashishsult]

I have use Oneplus Nord2 and Samsung Galaxy A31 with App version 3.1.6. 

As per the documentation, Instaburst feature is only enabled for nrf52832 (PCA10040), and that is why I an using that.

[Mttrinh]

And the phone is stopping on the same place on both phones? Are you able to provision the device if instaburst is disabled with both phones?

[Ashishsult]

Yes, both the phones stop at the same place. Also, yes when I disable the instaburst, both the phones are able to provision the device.

[Mttrinh]

Is it possible to upload your project so I can try to reproduce it over here?

[Ashishsult]

Hi Mttrinh,

Here is the attached light_switch example with instaburst enabled.

client.zip

[Mttrinh]

Hi,

Can you give me your whole project? I can't seem to build the project.

[Ashishsult]

Hi, 

Here is the complete folder.

nrf5sdkformeshv500src.7z

[Mttrinh]

Hi,

We did manage to reproduce the issue on an Android phone over here. Taking another look at the screenshots you have provided it seems like both the device and the phone is provisioned successfully. It looks like it is failing for the configuration message, the network transmit.

Ideally it should not happen but it can happen that the configuration message can fail, which mean that you just have to do it manually.

You could try to provision and if your not getting a response and it hangs then exit provision screen and configure this manually after going in to node. What I mean by that is after provisioning is completed and it hangs, exit the screen and reconnect manually then go into the node and try setting a  network transmit in the configuration server model.