• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 62 subscribers
  • Views 3156 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 108494
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Beacon problem with LED

nejcokle

Hello,

I'm using exeprimental dual mode example with my Beacon kit. I ported the example to work with pca2006, but i'm having problems with led. On my mkit, leds work just fine. But on beacons, when i define a led as output, led starts shining. Also commads like set and clear led don't work.

Did anyone experience this problem before?

Parents
  • 0

    I'm sorry not to mention that, i was just testing if the LEDs are working with gpio functions and I used blinky example to test it. I have not tested it with dual mode example. But I do not see why they should not work, unless the example is using those pins for something else.

Reply
  • 0

    I'm sorry not to mention that, i was just testing if the LEDs are working with gpio functions and I used blinky example to test it. I have not tested it with dual mode example. But I do not see why they should not work, unless the example is using those pins for something else.

Children
No Data
Related