Dear all,
I have struggled this problem over a week.
I am working on our product, which need to prevent other strangers to connect to our device. After search on the Nordic Q&A, I decided to use static passkey. But when I connected to " nRF Connect " on the PC, the device just connected immediately without popping out any window to input passkey.
What I use:
- Chip: nRF52832
- SDK: 15.2.0
- Board: Custom Board
- Base example: ble_app_template (Modified a lot. Since I need to add many other functions.)
Here as below are what I done so far:
- From this post I knew that Glucose Application example may helped.
I set the static in the peer_manager_init()#define SEC_PARAM_BOND 1 /**< Perform bonding. */ #define SEC_PARAM_MITM 1 /**< Man In The Middle protection not required. */ #define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */ #define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */ #define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_DISPLAY_ONLY /**< No I/O capabilities. */ #define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ #define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ #define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */ /**@brief Function for the Peer Manager initialization. */ static void peer_manager_init(void) { ble_gap_sec_params_t sec_param; ret_code_t err_code; err_code = pm_init(); APP_ERROR_CHECK(err_code); memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); // Security parameters to be used for all security procedures. sec_param.bond = SEC_PARAM_BOND; sec_param.mitm = SEC_PARAM_MITM; sec_param.lesc = SEC_PARAM_LESC; sec_param.keypress = SEC_PARAM_KEYPRESS; sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; sec_param.oob = SEC_PARAM_OOB; sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; sec_param.kdist_own.enc = 1; sec_param.kdist_own.id = 1; sec_param.kdist_peer.enc = 1; sec_param.kdist_peer.id = 1; err_code = pm_sec_params_set(&sec_param); APP_ERROR_CHECK(err_code); err_code = pm_register(pm_evt_handler); APP_ERROR_CHECK(err_code); ///////// what I change //////////// uint8_t passkey[] = "123456"; ble_opt_t ble_opt; ble_opt.gap_opt.passkey.p_passkey = &passkey[0]; err_code = sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &ble_opt); APP_ERROR_CHECK(err_code); //////////////////////////////////// } - Reference to Glucose example, I also do some changes in advertising_init()
/**@brief Function for initializing the Advertising functionality. */ static void advertising_init(void) { ret_code_t err_code; memset(&init, 0, sizeof(init)); init.advdata.name_type = BLE_ADVDATA_FULL_NAME; init.advdata.include_appearance = true; ///////// what I change //////////// init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE; // BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE //////////////////////////////////// init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); init.advdata.uuids_complete.p_uuids = m_adv_uuids; init.config.ble_adv_fast_enabled = true; init.config.ble_adv_fast_interval = APP_ADV_INTERVAL; init.config.ble_adv_fast_timeout = APP_ADV_DURATION; init.evt_handler = on_adv_evt; err_code = ble_advertising_init(&m_advertising, &init); APP_ERROR_CHECK(err_code); ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG); err_code = app_timer_create(&m_advertising_timer, APP_TIMER_MODE_REPEATED, advertising_timer_handler); APP_ERROR_CHECK(err_code); } - Above steps didn't work. So I found this post, modified the gap_params_init()
/**@brief Function for the GAP initialization. * * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the * device including the device name, appearance, and the preferred connection parameters. */ static void gap_params_init(void) { ret_code_t err_code; ble_gap_conn_params_t gap_conn_params; ble_gap_conn_sec_mode_t sec_mode; ///////// what I change ////////////// BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(&sec_mode); //BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); /////////////////////////////////////// // custom device name if(record_read(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_LENGTH_RECORD_ID, &custom_name_length)){ //nrf_gpio_pin_clear(LED_RED_PIN); char devname_with_addr[custom_name_length]; record_read(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_RECORD_ID, custom_name_from_fds); memcpy(devname_with_addr, custom_name_from_fds, custom_name_length); err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)devname_with_addr, strlen(devname_with_addr)); APP_ERROR_CHECK(err_code); } else{ err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)DEFAULT_DEVICE_NAME, strlen(DEFAULT_DEVICE_NAME)); APP_ERROR_CHECK(err_code); } memset(&gap_conn_params, 0, sizeof(gap_conn_params)); gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; gap_conn_params.slave_latency = SLAVE_LATENCY; gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; err_code = sd_ble_gap_ppcp_set(&gap_conn_params); APP_ERROR_CHECK(err_code); }
Hope someone can give me some advice (ಥ﹏ಥ)
Below is my whole ble connection code
#include "System.h"
#include "m_coms_btle.h"
#include "m_coms_btle_cfg.h"
#include "m_button.h"
/* m_coms_btle.c */
#include "ADS1231_spi.h"
#include "m_bat_meas.h"
#include "m_fds.h"
#include "m_pwr_mgmt.h"
/* BLE */
#include "ble.h"
#include "ble_hci.h"
#include "ble_srv_common.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "sensorsim.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_qwr.h"
#include "nrf_pwr_mgmt.h"
/* Service */
#include "ble_bas.h"
//#include "ble_nus.h"
#define ADVERTISING_LED_INTERVAL 1000
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */
// NUS Service
BLE_NUS_DEF(m_nus, NRF_SDH_BLE_TOTAL_LINK_COUNT); /**< BLE NUS service instance. */
BLE_BAS_DEF(m_bas);
NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */
NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/
APP_TIMER_DEF(m_advertising_timer);
uint32_t custom_name_length;
uint32_t custom_name_from_fds[3];
static ble_advertising_init_t init;
static uint8_t m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET; /**< Advertising handle used to identify an advertising set. */
static uint8_t m_enc_advdata[BLE_GAP_ADV_SET_DATA_SIZE_MAX]; /**< Buffer for storing an encoded advertising set. */
static uint8_t m_enc_scan_response_data[BLE_GAP_ADV_SET_DATA_SIZE_MAX]; /**< Buffer for storing an encoded scan data. */
/**@brief Struct that contains pointers to the encoded advertising data. */
static ble_gap_adv_data_t m_adv_data =
{
.adv_data =
{
.p_data = m_enc_advdata,
.len = BLE_GAP_ADV_SET_DATA_SIZE_MAX
},
.scan_rsp_data =
{
.p_data = m_enc_scan_response_data,
.len = BLE_GAP_ADV_SET_DATA_SIZE_MAX
}
};
/* YOUR_JOB: Declare all services structure your application is using
* BLE_XYZ_DEF(m_xyz);
*/
// YOUR_JOB: Use UUIDs for service(s) used in your application.
static ble_uuid_t m_adv_uuids[] = /**< Universally unique service identifiers. */
{
{BLE_UUID_DEVICE_INFORMATION_SERVICE, BLE_UUID_TYPE_BLE}
};
/***************************************************************************
*@brief GAP initialization.
*@details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
* device including the device name, appearance, and the preferred connection parameters.
***************************************************************************/
void gap_devname_default(void)
{
if(record_read(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_LENGTH_RECORD_ID, &custom_name_length))
{
file_delete(CUSTOM_NAME_FILE_ID);
system_suspend_mode_enter(true);
}
}
extern struct TrxEvt send_temp;
void gap_custom_device_name_set(uint8_t * name_char, uint8_t name_length){
ret_code_t err_code;
ble_advdata_t advdata;
ble_gap_adv_params_t adv_params;
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(&sec_mode);
sd_ble_gap_adv_stop(m_adv_handle);
custom_name_length = name_length;
memcpy(custom_name_from_fds, name_char, name_length);
uint16_t size;
uint8_t dataArray[10];
sprintf((char *)dataArray, "%d", name_length);
size = sizeof(name_length);
send_temp.data = dataArray;
send_temp.len = &size;
ble_nus_send(send_temp);
record_write(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_LENGTH_RECORD_ID, &custom_name_length, 1);
record_write(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_RECORD_ID, custom_name_from_fds, custom_name_length);
system_suspend_mode_enter(true);
}
void advertising_stop(void)
{
ret_code_t err_code = sd_ble_gap_adv_stop(m_advertising.adv_handle);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the GAP initialization.
*
* @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
* device including the device name, appearance, and the preferred connection parameters.
*/
static void gap_params_init(void)
{
ret_code_t err_code;
ble_gap_conn_params_t gap_conn_params;
ble_gap_conn_sec_mode_t sec_mode;
///////// what I change //////////////
BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(&sec_mode); //BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
///////////////////////////////////////
// custom device name
if(record_read(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_LENGTH_RECORD_ID, &custom_name_length)){
//nrf_gpio_pin_clear(LED_RED_PIN);
char devname_with_addr[custom_name_length];
record_read(CUSTOM_NAME_FILE_ID, CUSTOM_NAME_RECORD_ID, custom_name_from_fds);
memcpy(devname_with_addr, custom_name_from_fds, custom_name_length);
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *)devname_with_addr,
strlen(devname_with_addr));
APP_ERROR_CHECK(err_code);
}
else{
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *)DEFAULT_DEVICE_NAME,
strlen(DEFAULT_DEVICE_NAME));
APP_ERROR_CHECK(err_code);
}
memset(&gap_conn_params, 0, sizeof(gap_conn_params));
gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
gap_conn_params.slave_latency = SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the GATT module.
*/
static void gatt_init(void)
{
ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
APP_ERROR_CHECK(err_code);
err_code = nrf_ble_gatt_att_mtu_periph_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for putting the chip into sleep mode.
*
* @note This function will not return.
*/
static void sleep_mode_enter(void)
{
ret_code_t err_code;
//err_code = bsp_indication_set(BSP_INDICATE_IDLE);
//APP_ERROR_CHECK(err_code);
// Prepare wakeup buttons.
//err_code = bsp_btn_ble_sleep_mode_prepare();
//APP_ERROR_CHECK(err_code);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling advertising events.
*
* @details This function will be called for advertising events which are passed to the application.
*
* @param[in] ble_adv_evt Advertising event.
*/
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
switch (ble_adv_evt)
{
case BLE_ADV_EVT_FAST:
NRF_LOG_INFO("Fast advertising.");
break;
case BLE_ADV_EVT_IDLE:
sleep_mode_enter();
break;
default:
break;
}
}
static void advertising_timer_handler(void * p_context)
{
nrf_gpio_pin_toggle(LED_BLUE_PIN);
}
/**@brief Function for initializing the Advertising functionality.
*/
static void advertising_init(void)
{
ret_code_t err_code;
memset(&init, 0, sizeof(init));
init.advdata.name_type = BLE_ADVDATA_FULL_NAME;
init.advdata.include_appearance = true;
init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE; // BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE
init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
init.advdata.uuids_complete.p_uuids = m_adv_uuids;
init.config.ble_adv_fast_enabled = true;
init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
init.config.ble_adv_fast_timeout = APP_ADV_DURATION;
init.evt_handler = on_adv_evt;
err_code = ble_advertising_init(&m_advertising, &init);
APP_ERROR_CHECK(err_code);
ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
err_code = app_timer_create(&m_advertising_timer,
APP_TIMER_MODE_REPEATED,
advertising_timer_handler);
APP_ERROR_CHECK(err_code);
}
/***************************************************************************
*@brief Initialize Queued Write Module.
*@details
***************************************************************************/
#if NRF_MODULE_ENABLED(NRF_BLE_QWR)
/**@brief Function for handling Queued Write Module errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
static void qwr_init(void)
{
uint32_t err_code;
nrf_ble_qwr_init_t qwr_init;
// Initialize Queued Write Module.
memset(&qwr_init, 0, sizeof(qwr_init));
qwr_init.error_handler = nrf_qwr_error_handler;
err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init);
APP_ERROR_CHECK(err_code);
}
#endif
/***************************************************************************
*@brief Initialize Battery services.
*@details
***************************************************************************/
#if NRF_MODULE_ENABLED(BLE_BAS)
void ble_battery_level_update(uint8_t battery_level)
{
ble_bas_battery_level_update(&m_bas,battery_level,m_conn_handle);
}
static void bas_init(void)
{
uint32_t err_code;
ble_bas_init_t bas_init;
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
bas_init.bl_rd_sec = SEC_OPEN;
bas_init.bl_cccd_wr_sec = SEC_OPEN;
bas_init.bl_report_rd_sec = SEC_OPEN;
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
}
#endif
/***************************************************************************
*@brief Initialize NUS services.
*@details
***************************************************************************/
void ble_nus_send(const struct TrxEvt evt){
uint32_t err_code;
err_code = ble_nus_data_send(&m_nus, evt.data, evt.len, m_conn_handle);
if ((err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != NRF_ERROR_NOT_FOUND))
{
APP_ERROR_CHECK(err_code);
}
}
#if NRF_MODULE_ENABLED(BLE_NUS)
void Jmex_nus_init(void (*nus_handler)(ble_nus_evt_t * p_evt)){
uint32_t err_code;
ble_nus_init_t nus_init;
// Initialize NUS Service.
memset(&nus_init, 0, sizeof(nus_init));
nus_init.data_handler = nus_handler;
err_code = ble_nus_init(&m_nus, &nus_init);
APP_ERROR_CHECK(err_code);
}
#endif
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
#if NRF_MODULE_ENABLED(NRF_BLE_QWR)
qwr_init();
#endif
#if NRF_MODULE_ENABLED(BLE_BAS)
bas_init();
#endif
}
/**@brief Function for handling the Connection Parameters Module.
*
* @details This function will be called for all events in the Connection Parameters Module which
* are passed to the application.
* @note All this function does is to disconnect. This could have been done by simply
* setting the disconnect_on_fail config parameter, but instead we use the event
* handler mechanism to demonstrate its use.
*
* @param[in] p_evt Event received from the Connection Parameters Module.
*/
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
ret_code_t err_code;
if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
{
err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for handling a Connection Parameters error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for initializing the Connection Parameters module.
*/
static void conn_params_init(void)
{
ret_code_t err_code;
ble_conn_params_init_t cp_init;
memset(&cp_init, 0, sizeof(cp_init));
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
cp_init.evt_handler = on_conn_params_evt;
cp_init.error_handler = conn_params_error_handler;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling Peer Manager events.
*
* @param[in] p_evt Peer Manager event.
*/
static void pm_evt_handler(pm_evt_t const * p_evt)
{
pm_handler_on_pm_evt(p_evt);
pm_handler_flash_clean(p_evt);
switch (p_evt->evt_id)
{
case PM_EVT_PEERS_DELETE_SUCCEEDED:
advertising_start(false);
break;
default:
break;
}
}
/**@brief Function for the Peer Manager initialization.
*/
static void peer_manager_init(void)
{
ble_gap_sec_params_t sec_param;
ret_code_t err_code;
err_code = pm_init();
APP_ERROR_CHECK(err_code);
memset(&sec_param, 0, sizeof(ble_gap_sec_params_t));
// Security parameters to be used for all security procedures.
sec_param.bond = SEC_PARAM_BOND;
sec_param.mitm = SEC_PARAM_MITM;
sec_param.lesc = SEC_PARAM_LESC;
sec_param.keypress = SEC_PARAM_KEYPRESS;
sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES;
sec_param.oob = SEC_PARAM_OOB;
sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
sec_param.kdist_own.enc = 1;
sec_param.kdist_own.id = 1;
sec_param.kdist_peer.enc = 1;
sec_param.kdist_peer.id = 1;
err_code = pm_sec_params_set(&sec_param);
APP_ERROR_CHECK(err_code);
err_code = pm_register(pm_evt_handler);
APP_ERROR_CHECK(err_code);
uint8_t passkey[] = "123456";
ble_opt_t ble_opt;
ble_opt.gap_opt.passkey.p_passkey = &passkey[0];
err_code = sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &ble_opt);
APP_ERROR_CHECK(err_code);
}
/**@brief Clear bond information from persistent storage.
*/
static void delete_bonds(void)
{
ret_code_t err_code;
NRF_LOG_INFO("Erase bonds!");
err_code = pm_peers_delete();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for starting advertising.
*/
void advertising_start(bool erase_bonds)
{
ret_code_t err_code;
if (erase_bonds == true)
{
delete_bonds();
// Advertising is started by PM_EVT_PEERS_DELETED_SUCEEDED event
}
else
{
err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
}
err_code = app_timer_start(m_advertising_timer, APP_TIMER_TICKS(ADVERTISING_LED_INTERVAL), NULL);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
ret_code_t err_code = NRF_SUCCESS;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_DISCONNECTED:
NRF_LOG_INFO("Disconnected.");
ADS1231_stop();
err_code = app_timer_start(m_advertising_timer, APP_TIMER_TICKS(ADVERTISING_LED_INTERVAL), NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_CONNECTED:
NRF_LOG_INFO("Connected.");
// check calibration status
check_calibrated(0);
// battery test
app_timer_stop(m_advertising_timer);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
APP_ERROR_CHECK(err_code);
nrf_gpio_pin_set(LED_BLUE_PIN);
break;
case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
{
NRF_LOG_DEBUG("PHY update request.");
ble_gap_phys_t const phys =
{
.rx_phys = BLE_GAP_PHY_AUTO,
.tx_phys = BLE_GAP_PHY_AUTO,
};
err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
APP_ERROR_CHECK(err_code);
} break;
case BLE_GATTC_EVT_TIMEOUT:
// Disconnect on GATT Client timeout event.
NRF_LOG_DEBUG("GATT Client Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server timeout event.
NRF_LOG_DEBUG("GATT Server Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
// Configure the BLE stack using the default settings.
// Fetch the start address of the application RAM.
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
void ble_stack_params_init(void){
// Initialize GAP parameters.
gap_params_init();
// Initialize GATT parameters.
gatt_init();
// Default advertising setting.
advertising_init();
// Initialize BLE services.
services_init();
// Initialize connection parameters.
conn_params_init();
// Initialize peer manager.
peer_manager_init();
}
