active_wait_timeout setting doesn't seem to be taking effect

[Tester013]

I'm having some issues regarding the data update interval when running the asset_tracker_v2 application, particularly with adjusting how frequently it publishes data to the nRF Cloud. I have adjusted the KConfig setting such that the default value for DATA_ACTIVE_TIMEOUT_SECONDS is 30 inside the Kconfig.data_module file. However, what the device seems to be doing is sampling data every 30 seconds, but only publishing it to nRF Cloud once every 2 minutes.

I have also tried changing the activeWaitTime setting on the nRF Cloud portal to 30 with a similar lack of effect.

Does anyone have any additional information about this? Thanks!

[Hakon]

Hello,

do you have logs from this? Can you enable logging in the respective modules?

[Tester013]

Having enabled logging, the log is attached below:

Booting (0x8200).
*** Booting Zephyr OS build v3.0.99-ncs1  ***
I: Starting bootloader
I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: none
I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: none
I: Bootloader chainload address offset: 0x28000
I: Jumping to the first image slot
*** Booting Zephyr OS build v3.0.99-ncs1  ***
APPLICATION START! 
[00:00:00.507,690] 

[0m<inf> app_event_manager: APP_EVT_START

[0m
[00:00:00.509,002] 

[1;31m<err> settings: set-value failure. key: data_module/config error(40)

[0m
[00:00:00.509,216] 

[0m<inf> app_event_manager: DATA_EVT_CONFIG_INIT

[0m
[00:00:00.509,735] 

[0m<inf> app_event_manager: APP_EVT_ACTIVITY_DETECTION_DISABLE

[0m
[00:00:00.510,467] 

[0m<inf> app_event_manager: MODEM_EVT_INITIALIZED

[0m
[00:00:00.572,570] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CONNECTING

[0m
%CESQ: 54,2,10,1
+CEREG: 2,"2042","00378F1E",7
%CESQ: 49,2,3,0
+CSCON: 1
[00:00:03.913,085] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_DISCONNECTED

[0m
[00:00:03.913,696] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CELL_UPDATE

[0m
%CESQ: 50,2,8,1
%XTIME: ,"22701241737440","01"
%MDMEV: SEARCH STATUS 2
+CEREG: 5,"2042","00378F1E",7,,,"11100000","11100000"
AT+COPS=3,2
OK
AT+COPS?
+COPS: 0,2,"23415",7
OK
AT%XCBAND
%XCBAND: 20
OK
AT+CGDCONT?
[00:00:09.490,051] 

[0m<inf> app_event_manager: DATA_EVT_DATE_TIME_OBTAINED

[0m
[00:+CGDCONT: 0,"IP","wlapn.com","10.111.7.191",0,0
OK
00:10.320,037] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CONNECTED

[0m
[00:00:10.320,678] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_PSM_UPDATE

[0m
AT+CGACT?
[00:00:10.322,082] 

[1;33m<wrn> cloud_module: Cloud connection establishment in progress

[0m
[00:00:10.322,082] 

[1;33m<wrn> cloud_module: New connection attempt in 32 seconds if not successful

[0m
[00:00:10.322,265] 

[0m<inf> app_event_manager: CLOUD_EVT_CONNECTING

[0m
+CGACT: 0,1
OK
%CESQ: 49,2,3,0
[00:00:16.199,981] 

[0m<inf> app_event_manager: CLOUD_EVT_CONFIG_RECEIVED

[0m
[00:00:16.207,397] 

[0m<inf> app_event_manager: DATA_EVT_CONFIG_SEND

[0m
[00:00:16.208,129] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:00:17.396,423] 

[0m<inf> app_event_manager: CLOUD_EVT_CONNECTED

[0m
[00:00:17.397,613] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, MOD_STAT)

[0m
[00:00:17.399,139] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:00:17.402,984] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:17.403,259] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:17.404,205] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:17.404,479] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:17.506,072] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_STATIC_DATA_READY

[0m
[00:00:17.508,911] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:17.509,185] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:17.557,708] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
%NCELLMEAS: 0,"00378F1E","23415","2042",63,6300,104,57,16,17226,6300,103,52,6,0,17019
[00:00:17.651,947] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:17.652,221] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:17.700,378] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:00:17.710,876] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
[00:00:17.711,700] 

[0m<inf> app_event_manager: DATA_EVT_DATA_READY

[0m
[00:00:17.716,003] 

[0m<inf> app_event_manager: DATA_EVT_NEIGHBOR_CELLS_DATA_SEND

[0m
[00:00:17.736,175] 

[0m<inf> app_event_manager: DATA_EVT_DATA_SEND_BATCH

[0m
[00:00:17.736,938] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:00:17.737,213] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
%CESQ: 49,2,8,1
%NCELLMEAS: 0,"00378F1E","23415","2042",64,6300,104,57,19,30273,6300,103,53,11,0,25557
[00:00:30.509,796] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:00:30.510,559] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:00:30.628,021] 

[0m<inf> app_event_manager: GNSS_EVT_ACTIVE

[0m
[00:00:30.629,211] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:00:30.643,066] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:30.643,341] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:30.695,190] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_NOT_READY

[0m
[00:00:30.697,814] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:30.698,089] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:30.744,781] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:00:30.755,493] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
+CSCON: 0
%CESQ: 52,2,3,0
%CESQ: 54,2,14,2
%CESQ: 54,2,9,1
%CESQ: 54,2,4,0
%CESQ: 55,2,9,1
[00:01:00.509,826] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:01:00.510,498] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:01:00.510,559] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:01:00.510,559] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:01:00.510,589] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:01:00.511,383] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:01:00.513,610] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:00.513,885] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:01:00.560,791] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:01:00.563,568] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:00.563,842] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F1E","23415","2042",65,6300,104,54,5,59808,35797
[00:01:00.703,857] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:01:00.714,813] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
%CESQ: 53,2,3,0
%CESQ: 53,2,8,1
[00:01:30.509,857] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:01:30.510,528] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:01:30.510,589] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:01:30.510,589] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:01:30.510,620] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:01:30.511,474] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:01:30.513,519] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:30.513,793] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:01:30.561,157] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:01:30.563,781] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:30.564,056] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F1E","23415","2042",65,6300,104,53,12,89877,35797
[00:01:30.703,033] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:01:30.713,958] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
+CSCON: 1
[00:01:40.917,541] 

[0m<inf> app_event_manager: GNSS_EVT_TIMEOUT

[0m
[00:01:40.918,029] 

[0m<inf> app_event_manager: GNSS_EVT_INACTIVE

[0m
[00:01:40.919,097] 

[0m<inf> app_event_manager: DATA_EVT_DATA_READY

[0m
[00:01:40.922,302] 

[0m<inf> app_event_manager: DATA_EVT_NEIGHBOR_CELLS_DATA_SEND

[0m
[00:01:40.968,536] 

[0m<inf> app_event_manager: DATA_EVT_DATA_SEND_BATCH

[0m
[00:01:40.969,329] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:01:40.969,604] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
%CESQ: 52,2,3,0
+CSCON: 0
%NCELLMEAS: 0,"00378F1E","23415","2042",67,6300,104,51,-3,120690,119399
[00:02:00.509,857] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:02:00.510,528] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:02:00.527,191] 

[0m<inf> app_event_manager: GNSS_EVT_ACTIVE

[0m
[00:02:00.528,472] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:02:00.536,437] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:02:00.536,712] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:02:00.601,257] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:02:00.603,881] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:02:00.604,156] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:02:00.668,365] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:02:01.140,502] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
%CESQ: 53,2,8,1
%CESQ: 53,2,13,1
%CESQ: 53,2,8,1
%CESQ: 53,2,13,1
[00:02:30.509,887] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:02:30.510,559] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:02:30.510,620] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:02:30.510,620] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:02:30.510,650] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:02:30.511,444] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:02:30.513,671] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:02:30.513,946] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:02:30.561,126] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:02:30.563,934] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:02:30.564,208] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F1E","23415","2042",67,6300,104,54,12,150037,119399
[00:02:30.703,247] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:02:30.715,820] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
[00:03:00.509,918] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:03:00.510,589] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:03:00.510,650] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:03:00.510,650] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:03:00.510,681] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:03:00.511,566] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:03:00.513,732] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:03:00.514,007] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:03:00.563,354] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_NOT_READY

[0m
[00:03:00.566,040] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:03:00.566,314] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F1E","23415","2042",67,6300,104,55,9,180117,119399
[00:03:00.705,993] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:03:00.718,292] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
+CSCON: 1
[00:03:05.346,496] 

[0m<inf> app_event_manager: GNSS_EVT_TIMEOUT

[0m
[00:03:05.346,954] 

[0m<inf> app_event_manager: GNSS_EVT_INACTIVE

[0m
[00:03:05.348,022] 

[0m<inf> app_event_manager: DATA_EVT_DATA_READY

[0m
[00:03:05.351,196] 

[0m<inf> app_event_manager: DATA_EVT_NEIGHBOR_CELLS_DATA_SEND

[0m
[00:03:05.397,460] 
[0m<inf> app_event_manager: DATA_EVT_DATA_SEND_BATCH
[0m
[00:03:05.398,254] 
[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS
[0m
[00:03:05.398,559] 
[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS
[0m
%CESQ: 51,2,8,1
%CESQ: 50,2,2,0
%CESQ: 51,2,7,1

As you might be able to see, the data isn't being sent each time it's sampled, but instead only sent during certain sampling attempts. 

[Hakon]

In the beginning of the log there is the line

[1;31m<err> settings: set-value failure. key: data_module/config error(40)

which I assume means the config is not properly set.

I have adjusted the KConfig setting such that the default value for DATA_ACTIVE_TIMEOUT_SECONDS is 30 inside the Kconfig.data_module file.

Did you do this by changing the file directly? All config settings should be changed in the prj.conf file or similar.

[Tester013]

Could you clarify which setting I should change within the prj.conf file? I've poked around but not seem any configuration to change. In any case, I have restored the original Kconfig file and instead changed the code inside data_module.c to manually change active_wait_timeout to 30 seconds. The behaviour is the same as before, and I have attached the log below. 

*** Booting Zephyr OS build v3.0.99-ncs1  ***
I: Starting bootloader
I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: none
I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: none
I: Bootloader chainload address offset: 0x28000
I: Jumping to the first image slot
*** Booting Zephyr OS build v3.0.99-ncs1  ***
APPLICATION START! 
[00:00:00.507,629] 

[0m<inf> app_event_manager: APP_EVT_START

[0m
[00:00:00.508,758] 

[0m<inf> app_event_manager: MODEM_EVT_INITIALIZED

[0m
[00:00:00.570,739] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CONNECTING

[0m
[00:00:01.527,038] 

[1;33m<wrn> data_module: Active wait timeout: 30

[0m
[00:00:01.527,099] 

[1;33m<wrn> data_module: Active wait timeout: 30

[0m
[00:00:01.527,130] 

[1;33m<wrn> data_module: Movement resolution: 120

[0m
[00:00:01.527,130] 

[1;33m<wrn> data_module: Movement timeout: 3600

[0m
[00:00:01.527,160] 

[1;33m<wrn> data_module: GPS timeout: 60

[0m
[00:00:01.527,160] 

[1;33m<wrn> data_module: Accelerometer threshold: 10.00

[0m
[00:00:01.527,252] 

[0m<inf> app_event_manager: DATA_EVT_CONFIG_INIT

[0m
[00:00:01.527,770] 

[0m<inf> app_event_manager: APP_EVT_ACTIVITY_DETECTION_DISABLE

[0m
%CESQ: 53,2,8,1
+CEREG: 2,"2042","00378F14",7
+CSCON: 1
%CESQ: 59,2,17,2
[00:00:03.887,023] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_DISCONNECTED

[0m
[00:00:03.887,634] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CELL_UPDATE

[0m
%XTIME: ,"22705201954140","01"
%MDMEV: SEARCH STATUS 2
+CEREG: 5,"2042","00378F14",7,,,"11100000","11100000"
AT+COPS=3,2
OK
AT+COPS?
+COPS: 0,2,"23415",7
OK
AT%XCBAND
%XCBAND: 20
OK
AT+CGDCONT?
+CGDCONT: 0,"IP","wlapn.com","10.111.7.191",0,0
OK
AT+CGACT?
+CGACT: 0,1
OK
[00:00:07.934,082] 

[0m<inf> app_event_manager: DATA_EVT_DATE_TIME_OBTAINED

[0m
[00:00:08.381,591] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_CONNECTED

[0m
[00:00:08.382,232] 

[0m<inf> app_event_manager: MODEM_EVT_LTE_PSM_UPDATE

[0m
[00:00:08.383,605] 

[1;33m<wrn> cloud_module: Cloud connection establishment in progress

[0m
[00:00:08.383,605] 

[1;33m<wrn> cloud_module: New connection attempt in 32 seconds if not successful

[0m
[00:00:08.383,758] 

[0m<inf> app_event_manager: CLOUD_EVT_CONNECTING

[0m
[00:00:12.073,364] 

[0m<inf> app_event_manager: CLOUD_EVT_CONFIG_RECEIVED

[0m
[00:00:12.080,780] 

[0m<inf> app_event_manager: DATA_EVT_CONFIG_SEND

[0m
[00:00:12.081,512] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:00:13.018,218] 

[0m<inf> app_event_manager: CLOUD_EVT_CONNECTED

[0m
[00:00:13.019,409] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, MOD_STAT)

[0m
[00:00:13.020,935] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:00:13.024,993] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:13.025,268] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:13.026,397] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:13.026,672] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F14","23415","2042",80,6300,103,61,23,12800,6300,104,58,17,0,12849
[00:00:13.200,927] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_STATIC_DATA_READY

[0m
[00:00:13.203,857] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:13.204,132] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:13.253,265] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:00:13.256,256] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:13.256,530] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:13.305,267] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:00:13.315,704] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
[00:00:13.316,589] 

[0m<inf> app_event_manager: DATA_EVT_DATA_READY

[0m
[00:00:13.320,678] 

[0m<inf> app_event_manager: DATA_EVT_NEIGHBOR_CELLS_DATA_SEND

[0m
[00:00:13.323,150] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:00:13.323,211] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:00:13.323,272] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:00:13.341,064] 

[0m<inf> app_event_manager: DATA_EVT_DATA_SEND_BATCH

[0m
[00:00:13.341,827] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:00:13.342,102] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
%NCELLMEAS: 0,"00378F14","23415","2042",80,6300,103,60,21,31032,6300,104,59,19,0,30170
[00:00:31.527,801] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:00:31.528,564] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:00:31.579,895] 

[0m<inf> app_event_manager: GNSS_EVT_ACTIVE

[0m
[00:00:31.581,085] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:00:31.594,940] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:31.595,214] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:31.664,581] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_NOT_READY

[0m
[00:00:31.667,236] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:00:31.667,510] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:00:31.737,670] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:00:31.747,924] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
+CSCON: 0
%CESQ: 51,2,0,0
%CESQ: 58,2,17,2
[00:01:01.527,832] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:01:01.528,503] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:01:01.528,564] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:01:01.528,564] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:01:01.528,594] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:01:01.529,479] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:01:01.531,768] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:01.532,043] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:01:01.581,268] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:01:01.583,984] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:01.584,259] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F14","23415","2042",73,6300,103,58,16,60971,42330
[00:01:01.724,243] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:01:01.736,358] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
%CESQ: 58,2,12,1
%CESQ: 58,2,17,2
%CESQ: 57,2,12,1
[00:01:31.527,893] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET_ALL

[0m
[00:01:31.528,564] 

[0m<inf> app_event_manager: APP_EVT_DATA_GET - Requested data types (MOD_DYN, BAT, ENV, NEIGHBOR_CELLS, GNSS)

[0m
[00:01:31.528,625] 

[1;33m<wrn> gnss_module: GNSS search already active and will not be restarted

[0m
[00:01:31.528,625] 

[1;33m<wrn> gnss_module: Try setting a sample/publication interval greater

[0m
[00:01:31.528,656] 

[1;33m<wrn> gnss_module: than the GNSS search timeout.

[0m
[00:01:31.529,571] 

[0m<inf> app_event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY

[0m
[00:01:31.531,707] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:31.531,982] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
[00:01:31.580,139] 

[0m<inf> app_event_manager: MODEM_EVT_MODEM_DYNAMIC_DATA_READY

[0m
[00:01:31.583,190] 

[0m<dbg> modem_info: parse_ip_addresses: Device has 1 IP addresses

[0m
[00:01:31.583,465] 

[0m<dbg> modem_info: parse_ip_addresses: IP address found: 10.111.7.191

[0m
%NCELLMEAS: 0,"00378F14","23415","2042",73,6300,103,57,13,91051,42330
[00:01:31.723,144] 

[0m<inf> app_event_manager: MODEM_EVT_BATTERY_DATA_READY

[0m
[00:01:31.735,321] 

[0m<inf> app_event_manager: MODEM_EVT_NEIGHBOR_CELLS_DATA_READY

[0m
%CESQ: 57,2,17,2
%CESQ: 57,2,12,1
+CSCON: 1
%CESQ: 59,2,18,2
[00:01:47.138,916] 

[0m<inf> app_event_manager: GNSS_EVT_TIMEOUT

[0m
[00:01:47.139,404] 

[0m<inf> app_event_manager: GNSS_EVT_INACTIVE

[0m
[00:01:47.140,563] 

[0m<inf> app_event_manager: DATA_EVT_DATA_READY

[0m
[00:01:47.143,737] 

[0m<inf> app_event_manager: DATA_EVT_NEIGHBOR_CELLS_DATA_SEND

[0m
[00:01:47.148,986] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:01:47.149,047] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:01:47.149,108] 

[1;31m<err> cloud_codec: Value of button is 0 

[0m
[00:01:47.189,910] 

[0m<inf> app_event_manager: DATA_EVT_DATA_SEND_BATCH

[0m
[00:01:47.190,795] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m
[00:01:47.191,101] 

[0m<inf> app_event_manager: CLOUD_EVT_DATA_SEND_QOS

[0m

[Hakon]

Tester013 said:

Could you clarify which setting I should change within the prj.conf file?

CONFIG_DATA_ACTIVE_TIMEOUT_SECONDS.

I'm not sure why setting it directly in the code doesn't work, but you can try setting the config in prj.conf and try again.