Needed example code of GPIOTE port event on NRF5340

[ibrahim2012]

Hello All, 

I need an example code of the GPIOTE port event on NRF5340 based on the nRF Connect SDK v1.9.0.

Thanks in advance,

[Øivind]

Hi,

We have example code for GPIOTE events at zephyr/samples/boards/nrf/nrfx

Simply change the high_accuracy field of the in_config to "false" to use PORT event instead of IN event.

To verify, you can call nrfx_gpiote_in_event_get(pin) in the button_handler and compare the return value with NRF_GPIOTE_EVENT_PORT.

Here is a main file for the sample, which has been edited with these changes: 

Fullscreen 45041.main.c Download

/*
 * Copyright (c) 2019 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr.h>

#include <nrfx_gpiote.h>
#include <helpers/nrfx_gppi.h>
#if defined(DPPI_PRESENT)
#include <nrfx_dppi.h>
#else
#include <nrfx_ppi.h>
#endif

#include <logging/log.h>
LOG_MODULE_REGISTER(nrfx_sample, LOG_LEVEL_INF);

#define INPUT_PIN	DT_GPIO_PIN(DT_ALIAS(sw0), gpios)
#define OUTPUT_PIN	DT_GPIO_PIN(DT_ALIAS(led0), gpios)

static void button_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action)
{
	LOG_INF("GPIO input event callback");
	nrf_gpiote_event_t event_test;

	event_test = nrfx_gpiote_in_event_get(pin);
	if (event_test == NRF_GPIOTE_EVENT_PORT)
	{
		LOG_INF("PORT EVENT");
	}
	else
	{
		LOG_INF("IN EVENT");
	}

}

void main(void)
{
	LOG_INF("nrfx_gpiote sample on %s", CONFIG_BOARD);

	nrfx_err_t err;

	/* Connect GPIOTE_0 IRQ to nrfx_gpiote_irq_handler */
	IRQ_CONNECT(DT_IRQN(DT_NODELABEL(gpiote)),
		    DT_IRQ(DT_NODELABEL(gpiote), priority),
		    nrfx_isr, nrfx_gpiote_irq_handler, 0);

	/* Initialize GPIOTE (the interrupt priority passed as the parameter
	 * here is ignored, see nrfx_glue.h).
	 */
	err = nrfx_gpiote_init(0);
	if (err != NRFX_SUCCESS) {
		LOG_ERR("nrfx_gpiote_init error: %08x", err);
		return;
	}

	nrfx_gpiote_in_config_t const in_config = {
		.sense = NRF_GPIOTE_POLARITY_HITOLO,
		.pull = NRF_GPIO_PIN_PULLUP,
		.is_watcher = false,
		.hi_accuracy = false,
		.skip_gpio_setup = false,
	};

	/* Initialize input pin to generate event on high to low transition
	 * (falling edge) and call button_handler()
	 */
	err = nrfx_gpiote_in_init(INPUT_PIN, &in_config, button_handler);
	if (err != NRFX_SUCCESS) {
		LOG_ERR("nrfx_gpiote_in_init error: %08x", err);
		return;
	}

	nrfx_gpiote_out_config_t const out_config = {
		.action = NRF_GPIOTE_POLARITY_TOGGLE,
		.init_state = 1,
		.task_pin = true,
	};

	/* Initialize output pin. SET task will turn the LED on,
	 * CLR will turn it off and OUT will toggle it.
	 */
	err = nrfx_gpiote_out_init(OUTPUT_PIN, &out_config);
	if (err != NRFX_SUCCESS) {
		LOG_ERR("nrfx_gpiote_out_init error: %08x", err);
		return;
	}

	nrfx_gpiote_in_event_enable(INPUT_PIN, true);
	nrfx_gpiote_out_task_enable(OUTPUT_PIN);

	LOG_INF("nrfx_gpiote initialized");

	/* Allocate a (D)PPI channel. */
#if defined(DPPI_PRESENT)
	uint8_t channel;
	err = nrfx_dppi_channel_alloc(&channel);
#else
	nrf_ppi_channel_t channel;
	err = nrfx_ppi_channel_alloc(&channel);
#endif
	if (err != NRFX_SUCCESS) {
		LOG_ERR("(D)PPI channel allocation error: %08x", err);
		return;
	}

	/* Configure endpoints of the channel so that the input pin event is
	 * connected with the output pin OUT task. This means that each time
	 * the button is pressed, the LED pin will be toggled.
	 */
	nrfx_gppi_channel_endpoints_setup(channel,
		nrfx_gpiote_in_event_addr_get(INPUT_PIN),
		nrfx_gpiote_out_task_addr_get(OUTPUT_PIN));

	/* Enable (D)PPI channel. */
#if defined(DPPI_PRESENT)
	err = nrfx_dppi_channel_enable(channel);
#else
	err = nrfx_ppi_channel_enable(channel);
#endif
	if (err != NRFX_SUCCESS) {
		LOG_ERR("Failed to enable (D)PPI channel, error: %08x", err);
		return;
	}

	LOG_INF("(D)PPI configured, leaving main()");
}