Hi,
I have integrated HID mouse and keyboard, when my custom board was connected with computer, there is "hello" on notepad. But when I pushed "CapsLk" key, RTT viewer did not print "CAPS ON" or "CAPS OF".
SDK 17.02 on nRF52810
Here is main code.
/**
* Copyright (c) 2014 - 2020, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/** @file
*
* @defgroup ble_sdk_app_hids_mouse_main main.c
* @{
* @ingroup ble_sdk_app_hids_mouse
* @brief HID Mouse Sample Application main file.
*
* This file contains is the source code for a sample application using the HID, Battery and Device
* Information Service for implementing a simple mouse functionality. This application uses the
* @ref app_scheduler.
*
* Also it would accept pairing requests from any peer device. This implementation of the
* application will not know whether a connected central is a known device or not.
*/
#include <stdint.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf.h"
#include "nrf_sdm.h"
#include "app_error.h"
#include "ble.h"
#include "ble_err.h"
#include "ble_hci.h"
#include "ble_srv_common.h"
#include "ble_advdata.h"
#include "ble_hids.h"
#include "ble_bas.h"
#include "ble_dis.h"
#include "ble_conn_params.h"
#include "sensorsim.h"
//#include "bsp_btn_ble.h"
#include "app_scheduler.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "app_timer.h"
#include "peer_manager.h"
#include "ble_advertising.h"
#include "fds.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_qwr.h"
#include "nrf_pwr_mgmt.h"
#include "peer_manager_handler.h"
#include "usr_io_def.h"
#include "usr_twi.h"
#include "m_hid_app.h"
#include "nrf_drv_saadc.h"
#include "usr_led.h"
#include "ble_dfu.h"
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#define DEVICE_NAME "nRF5_Mouse" /**< Name of device. Will be included in the advertising data. */
#define MANUFACTURER_NAME "NordicSemiconductor" /**< Manufacturer. Will be passed to Device Information Service. */
#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shouldn't need to modify this value. */
#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. */
#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(2000) /**< Battery level measurement interval (ticks). */
#define MIN_BATTERY_LEVEL 81 /**< Minimum simulated battery level. */
#define MAX_BATTERY_LEVEL 100 /**< Maximum simulated battery level. */
#define BATTERY_LEVEL_INCREMENT 1 /**< Increment between each simulated battery level measurement. */
#define PNP_ID_VENDOR_ID_SOURCE 0x02 /**< Vendor ID Source. */
#define PNP_ID_VENDOR_ID 0x1915 /**< Vendor ID. */
#define PNP_ID_PRODUCT_ID 0xEEEE /**< Product ID. */
#define PNP_ID_PRODUCT_VERSION 0x0001 /**< Product Version. */
/*lint -emacro(524, MIN_CONN_INTERVAL) // Loss of precision */
#define MIN_CONN_INTERVAL MSEC_TO_UNITS(7.5, UNIT_1_25_MS) /**< Minimum connection interval (7.5 ms). */
#define MAX_CONN_INTERVAL MSEC_TO_UNITS(15, UNIT_1_25_MS) /**< Maximum connection interval (15 ms). */
#define SLAVE_LATENCY 20 /**< Slave latency. */
#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(3000, UNIT_10_MS) /**< Connection supervisory timeout (3000 ms). */
#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAM_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */
#define SEC_PARAM_BOND 1 /**< Perform bonding. */
#define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */
#define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */
#define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */
#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */
#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */
#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */
#define SWIFT_PAIR_SUPPORTED 1 /**< Swift Pair feature is supported. */
#if SWIFT_PAIR_SUPPORTED == 1
#define MICROSOFT_VENDOR_ID 0x0006 /**< Microsoft Vendor ID.*/
#define MICROSOFT_BEACON_ID 0x03 /**< Microsoft Beacon ID, used to indicate that Swift Pair feature is supported. */
#define MICROSOFT_BEACON_SUB_SCENARIO 0x00 /**< Microsoft Beacon Sub Scenario, used to indicate how the peripheral will pair using Swift Pair feature. */
#define RESERVED_RSSI_BYTE 0x80 /**< Reserved RSSI byte, used to maintain forwards and backwards compatibility. */
#endif
//ADC define
#define ADC_REF_VOLTAGE_IN_MILLIVOLTS 600 /**< Reference voltage (in milli volts) used by ADC while doing conversion. */
#define ADC_PRE_SCALING_COMPENSATION 6 /**< The ADC is configured to use VDD with 1/3 prescaling as input. And hence the result of conversion is to be multiplied by 3 to get the actual value of the battery voltage.*/
#define DIODE_FWD_VOLT_DROP_MILLIVOLTS 0 /**< Typical forward voltage drop of the diode . */
#define ADC_RES_10BIT 1024 /**< Maximum digital value for 10-bit ADC conversion. */
#define ADC_RESULT_IN_MILLI_VOLTS(ADC_VALUE)\
((((ADC_VALUE) * ADC_REF_VOLTAGE_IN_MILLIVOLTS) / ADC_RES_10BIT) * ADC_PRE_SCALING_COMPENSATION)
//HID MAP define
#define MOVEMENT_SPEED 5 /**< Number of pixels by which the cursor is moved each time a button is pushed. */
#define INPUT_REPORT_COUNT 4 /**< Number of input reports in this application. */
#define INPUT_REP_BUTTONS_LEN 3 /**< Length of Mouse Input Report containing button data. */
#define INPUT_REP_MOVEMENT_LEN 3 /**< Length of Mouse Input Report containing movement data. */
#define INPUT_REP_MEDIA_PLAYER_LEN 1 /**< Length of Mouse Input Report containing media player data. */
#define INPUT_REP_BUTTONS_INDEX 0 /**< Index of Mouse Input Report containing button data. */
#define INPUT_REP_MOVEMENT_INDEX 1 /**< Index of Mouse Input Report containing movement data. */
#define INPUT_REP_MPLAYER_INDEX 2 /**< Index of Mouse Input Report containing media player data. */
#define INPUT_REP_REF_BUTTONS_ID 1 /**< Id of reference to Mouse Input Report containing button data. */
#define INPUT_REP_REF_MOVEMENT_ID 2 /**< Id of reference to Mouse Input Report containing movement data. */
#define INPUT_REP_REF_MPLAYER_ID 3 /**< Id of reference to Mouse Input Report containing media player data. */
#define OUTPUT_REPORT_INDEX 0 /**< Index of Output Report. */
#define OUTPUT_REPORT_MAX_LEN 1 /**< Maximum length of Output Report. */
#define INPUT_REPORT_KEYS_INDEX 3 /**< Index of Input Report. */
#define OUTPUT_REPORT_BIT_MASK_CAPS_LOCK 0x02 /**< CAPS LOCK bit in Output Report (based on 'LED Page (0x08)' of the Universal Serial Bus HID Usage Tables). */
#define INPUT_REP_REF_ID 4 /**< Id of reference to Keyboard Input Report. */
#define OUTPUT_REP_REF_ID 0 /**< Id of reference to Keyboard Output Report. */
#define FEATURE_REP_REF_ID 0 /**< ID of reference to Keyboard Feature Report. */
#define FEATURE_REPORT_MAX_LEN 2 /**< Maximum length of Feature Report. */
#define FEATURE_REPORT_INDEX 0
#define MAX_BUFFER_ENTRIES 5
#define INPUT_REPORT_KEYS_MAX_LEN 8
#define BASE_USB_HID_SPEC_VERSION 0x0101 /**< Version number of base USB HID Specification implemented by this application. */
#define SCHED_MAX_EVENT_DATA_SIZE APP_TIMER_SCHED_EVENT_DATA_SIZE /**< Maximum size of scheduler events. */
#ifdef SVCALL_AS_NORMAL_FUNCTION
#define SCHED_QUEUE_SIZE 20 /**< Maximum number of events in the scheduler queue. More is needed in case of Serialization. */
#else
#define SCHED_QUEUE_SIZE 10 /**< Maximum number of events in the scheduler queue. */
#endif
#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */
#define APP_ADV_FAST_INTERVAL 0x0028 /**< Fast advertising interval (in units of 0.625 ms. This value corresponds to 25 ms.). */
#define APP_ADV_SLOW_INTERVAL 0x00A0 /**< Slow advertising interval (in units of 0.625 ms. This value corresponds to 100 ms.). */
#define APP_ADV_FAST_DURATION 1000 //3000 /**< The advertising duration of fast advertising in units of 10 milliseconds. */
#define APP_ADV_SLOW_DURATION 12000 //18000 /**< The advertising duration of slow advertising in units of 10 milliseconds. */
APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */
BLE_BAS_DEF(m_bas); /**< Battery service instance. */
BLE_HIDS_DEF(m_hids, /**< HID service instance. */
NRF_SDH_BLE_TOTAL_LINK_COUNT,
INPUT_REP_BUTTONS_LEN,
INPUT_REP_MOVEMENT_LEN,
INPUT_REP_MEDIA_PLAYER_LEN);
NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/
BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */
static nrf_saadc_value_t m_adc_buf;
static bool m_in_boot_mode = false; /**< Current protocol mode. */
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */
static pm_peer_id_t m_peer_id; /**< Device reference handle to the current bonded central. */
static ble_uuid_t m_adv_uuids[] = /**< Universally unique service identifiers. */
{
{BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE, BLE_UUID_TYPE_BLE}
};
/** @} */
/** Abstracts buffer element */
typedef struct hid_key_buffer
{
uint8_t data_offset; /**< Max Data that can be buffered for all entries */
uint8_t data_len; /**< Total length of data */
uint8_t * p_data; /**< Scanned key pattern */
ble_hids_t * p_instance; /**< Identifies peer and service instance */
} buffer_entry_t;
STATIC_ASSERT(sizeof(buffer_entry_t) % 4 == 0);
/** Circular buffer list */
typedef struct
{
buffer_entry_t buffer[MAX_BUFFER_ENTRIES]; /**< Maximum number of entries that can enqueued in the list */
uint8_t rp; /**< Index to the read location */
uint8_t wp; /**< Index to write location */
uint8_t count; /**< Number of elements in the list */
} buffer_list_t;
STATIC_ASSERT(sizeof(buffer_list_t) % 4 == 0);
static buffer_list_t buffer_list; /**< List to enqueue not just data to be sent, but also related information like the handle, connection handle etc */
//Key
static bool m_caps_on = false; /**< Variable to indicate if Caps Lock is turned on. */
static uint8_t m_sample_key_press_scan_str[] = /**< Key pattern to be sent when the key press button has been pushed. */
{
0x0b, /* Key h */
0x08, /* Key e */
0x0f, /* Key l */
0x0f, /* Key l */
0x12, /* Key o */
0x28 /* Key Return */
};
static uint8_t m_caps_on_key_scan_str[] = /**< Key pattern to be sent when the output report has been written with the CAPS LOCK bit set. */
{
0x06, /* Key C */
0x04, /* Key a */
0x13, /* Key p */
0x16, /* Key s */
0x12, /* Key o */
0x11, /* Key n */
};
static uint8_t m_caps_off_key_scan_str[] = /**< Key pattern to be sent when the output report has been written with the CAPS LOCK bit cleared. */
{
0x06, /* Key C */
0x04, /* Key a */
0x13, /* Key p */
0x16, /* Key s */
0x12, /* Key o */
0x09, /* Key f */
};
/** @} */
#if SWIFT_PAIR_SUPPORTED == 1
static uint8_t m_sp_payload[] = /**< Payload of advertising data structure for Microsoft Swift Pair feature. */
{
MICROSOFT_BEACON_ID,
MICROSOFT_BEACON_SUB_SCENARIO,
RESERVED_RSSI_BYTE
};
static ble_advdata_manuf_data_t m_sp_manuf_advdata = /**< Advertising data structure for Microsoft Swift Pair feature. */
{
.company_identifier = MICROSOFT_VENDOR_ID,
.data =
{
.size = sizeof(m_sp_payload),
.p_data = &m_sp_payload[0]
}
};
static ble_advdata_t m_sp_advdata;
#endif
static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt);
/**@brief Callback function for asserts in the SoftDevice.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyze
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(DEAD_BEEF, line_num, p_file_name);
}
/**@brief Function for setting filtered whitelist.
*
* @param[in] skip Filter passed to @ref pm_peer_id_list.
*/
static void whitelist_set(pm_peer_id_list_skip_t skip)
{
pm_peer_id_t peer_ids[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
uint32_t peer_id_count = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
ret_code_t err_code = pm_peer_id_list(peer_ids, &peer_id_count, PM_PEER_ID_INVALID, skip);
APP_ERROR_CHECK(err_code);
NRF_LOG_INFO("\tm_whitelist_peer_cnt %d, MAX_PEERS_WLIST %d",
peer_id_count + 1,
BLE_GAP_WHITELIST_ADDR_MAX_COUNT);
err_code = pm_whitelist_set(peer_ids, peer_id_count);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for setting filtered device identities.
*
* @param[in] skip Filter passed to @ref pm_peer_id_list.
*/
static void identities_set(pm_peer_id_list_skip_t skip)
{
pm_peer_id_t peer_ids[BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT];
uint32_t peer_id_count = BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT;
ret_code_t err_code = pm_peer_id_list(peer_ids, &peer_id_count, PM_PEER_ID_INVALID, skip);
APP_ERROR_CHECK(err_code);
err_code = pm_device_identities_list_set(peer_ids, peer_id_count);
APP_ERROR_CHECK(err_code);
}
/**@brief Clear bond information from persistent storage.
*/
static void delete_bonds(void)
{
ret_code_t err_code;
NRF_LOG_INFO("Erase bonds!");
err_code = pm_peers_delete();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for starting advertising.
*/
static void advertising_start(bool erase_bonds)
{
if (erase_bonds == true)
{
delete_bonds();
// Advertising is started by PM_EVT_PEERS_DELETE_SUCCEEDED event.
}
else
{
whitelist_set(PM_PEER_ID_LIST_SKIP_NO_ID_ADDR);
ret_code_t ret = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(ret);
}
}
/**@brief Function for handling Peer Manager events.
*
* @param[in] p_evt Peer Manager event.
*/
static void pm_evt_handler(pm_evt_t const * p_evt)
{
pm_handler_on_pm_evt(p_evt);
pm_handler_flash_clean(p_evt);
switch (p_evt->evt_id)
{
case PM_EVT_CONN_SEC_SUCCEEDED:
m_peer_id = p_evt->peer_id;
m_hid_data.peer_manage = true;
break;
case PM_EVT_PEERS_DELETE_SUCCEEDED:
advertising_start(false);
break;
case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED:
if ( p_evt->params.peer_data_update_succeeded.flash_changed
&& (p_evt->params.peer_data_update_succeeded.data_id == PM_PEER_DATA_ID_BONDING))
{
NRF_LOG_INFO("New Bond, add the peer to the whitelist if possible");
// Note: You should check on what kind of white list policy your application should use.
whitelist_set(PM_PEER_ID_LIST_SKIP_NO_ID_ADDR);
}
break;
case PM_EVT_CONN_SEC_CONFIG_REQ:
{
pm_conn_sec_config_t config = {.allow_repairing = true};
pm_conn_sec_config_reply(p_evt->conn_handle, &config);
}
break;
default:
break;
}
}
/**@brief Function for handling Service errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void service_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for handling advertising errors.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void ble_advertising_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for handling the ADC interrupt.
*
* @details This function will fetch the conversion result from the ADC, convert the value into
* percentage and send it to peer.
*/
void saadc_event_handler(nrf_drv_saadc_evt_t const * p_event)
{
if (p_event->type == NRF_DRV_SAADC_EVT_DONE)
{
nrf_saadc_value_t adc_result;
uint16_t batt_lvl_in_milli_volts;
adc_result = p_event->data.done.p_buffer[0];
batt_lvl_in_milli_volts =
(ADC_RESULT_IN_MILLI_VOLTS(adc_result) + DIODE_FWD_VOLT_DROP_MILLIVOLTS)*2;
if(batt_lvl_in_milli_volts>=4100) m_hid_data.battery_level=100;
else if((batt_lvl_in_milli_volts>=3900)&((batt_lvl_in_milli_volts<4100))) m_hid_data.battery_level=75;
else if((batt_lvl_in_milli_volts>=3700)&((batt_lvl_in_milli_volts<3900))) m_hid_data.battery_level=50;
else if((batt_lvl_in_milli_volts>=3550)&((batt_lvl_in_milli_volts<3700))) m_hid_data.battery_level=25;
else if(batt_lvl_in_milli_volts<3550) m_hid_data.battery_level=0;
if(batt_lvl_in_milli_volts<=3450)
{
if(m_hid_data.ble_status != DEVICE_LOW_POWER_WAIT)
{
m_hid_data.ble_status = DEVICE_LOW_POWER;
}
}else if(batt_lvl_in_milli_volts>=3600)
{
if(m_hid_data.ble_status == DEVICE_LOW_POWER_WAIT)
{
m_hid_data.ble_status = DEVICE_LOW_POWER_EXIT;
}
}
NRF_LOG_INFO("HID DEVICE Battery Level : %d [mV] %d%%", batt_lvl_in_milli_volts,m_hid_data.battery_level);
}
else if (p_event->type == NRF_DRV_SAADC_EVT_CALIBRATEDONE)
{
NRF_LOG_INFO("HID SAADC calibration complete");
}
}
/**@brief Function for performing a battery measurement, and update the Battery Level characteristic in the Battery Service.
*/
static void battery_level_update(void)
{
ret_code_t err_code;
static uint8_t * p_key = m_sample_key_press_scan_str;
static uint8_t size = 0;
err_code = nrf_drv_saadc_buffer_convert(&m_adc_buf, 1);
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_saadc_sample();
APP_ERROR_CHECK(err_code);
err_code = ble_bas_battery_level_update(&m_bas, m_hid_data.battery_level, BLE_CONN_HANDLE_ALL);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_BUSY) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != NRF_ERROR_FORBIDDEN) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
NRF_LOG_INFO("xxxxx...");
if (m_hid_data.peer_manage == true)
{
NRF_LOG_INFO("Keys update...");
keys_send(1, p_key);
p_key++;
size++;
if (size == MAX_KEYS_IN_ONE_REPORT)
{
p_key = m_sample_key_press_scan_str;
size = 0;
}
}
}
/**@brief Function for handling the Battery measurement timer timeout.
*
* @details This function will be called each time the battery level measurement timer expires.
*
* @param[in] p_context Pointer used for passing some arbitrary information (context) from the
* app_start_timer() call to the timeout handler.
*/
static void battery_level_meas_timeout_handler(void * p_context)
{
UNUSED_PARAMETER(p_context);
battery_level_update();
}
/**@brief Function for the Timer initialization.
*
* @details Initializes the timer module.
*/
static void timers_init(void)
{
ret_code_t err_code;
err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_saadc_init(NULL, saadc_event_handler);
APP_ERROR_CHECK(err_code);
nrf_saadc_channel_config_t config =
NRF_DRV_SAADC_DEFAULT_CHANNEL_CONFIG_SE(NRF_SAADC_INPUT_AIN2);
config.burst = NRF_SAADC_BURST_ENABLED;
err_code = nrf_drv_saadc_channel_init(0, &config);
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_saadc_calibrate_offset();
APP_ERROR_CHECK(err_code);
// Create battery timer.
err_code = app_timer_create(&m_battery_timer_id,
APP_TIMER_MODE_REPEATED,
battery_level_meas_timeout_handler);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the GAP initialization.
*
* @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
* device including the device name, appearance, and the preferred connection parameters.
*/
static void gap_params_init(void)
{
ret_code_t err_code;
ble_gap_conn_params_t gap_conn_params;
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *)DEVICE_NAME,
strlen(DEVICE_NAME));
APP_ERROR_CHECK(err_code);
err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_HID_MOUSE);
APP_ERROR_CHECK(err_code);
memset(&gap_conn_params, 0, sizeof(gap_conn_params));
gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
gap_conn_params.slave_latency = SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the GATT module.
*/
static void gatt_init(void)
{
ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling Queued Write Module errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for initializing the Queued Write Module.
*/
static void qwr_init(void)
{
ret_code_t err_code;
nrf_ble_qwr_init_t qwr_init_obj = {0};
qwr_init_obj.error_handler = nrf_qwr_error_handler;
err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing Device Information Service.
*/
static void dis_init(void)
{
ret_code_t err_code;
ble_dis_init_t dis_init_obj;
ble_dis_pnp_id_t pnp_id;
pnp_id.vendor_id_source = PNP_ID_VENDOR_ID_SOURCE;
pnp_id.vendor_id = PNP_ID_VENDOR_ID;
pnp_id.product_id = PNP_ID_PRODUCT_ID;
pnp_id.product_version = PNP_ID_PRODUCT_VERSION;
memset(&dis_init_obj, 0, sizeof(dis_init_obj));
ble_srv_ascii_to_utf8(&dis_init_obj.manufact_name_str, MANUFACTURER_NAME);
dis_init_obj.p_pnp_id = &pnp_id;
dis_init_obj.dis_char_rd_sec = SEC_JUST_WORKS;
err_code = ble_dis_init(&dis_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing Battery Service.
*/
static void bas_init(void)
{
ret_code_t err_code;
ble_bas_init_t bas_init_obj;
memset(&bas_init_obj, 0, sizeof(bas_init_obj));
bas_init_obj.evt_handler = NULL;
bas_init_obj.support_notification = true;
bas_init_obj.p_report_ref = NULL;
bas_init_obj.initial_batt_level = 100;
bas_init_obj.bl_rd_sec = SEC_JUST_WORKS;
bas_init_obj.bl_cccd_wr_sec = SEC_JUST_WORKS;
bas_init_obj.bl_report_rd_sec = SEC_JUST_WORKS;
err_code = ble_bas_init(&m_bas, &bas_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing DFU Service.
*/
static void advertising_config_get(ble_adv_modes_config_t * p_config)
{
memset(p_config, 0, sizeof(ble_adv_modes_config_t));
p_config->ble_adv_fast_enabled = true;
p_config->ble_adv_fast_interval = APP_ADV_FAST_INTERVAL;
p_config->ble_adv_fast_timeout = APP_ADV_FAST_DURATION;
}
static void disconnect(uint16_t conn_handle, void * p_context)
{
UNUSED_PARAMETER(p_context);
ret_code_t err_code = sd_ble_gap_disconnect(conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
if (err_code != NRF_SUCCESS)
{
NRF_LOG_WARNING("Failed to disconnect connection. Connection handle: %d Error: %d", conn_handle, err_code);
}
else
{
NRF_LOG_DEBUG("Disconnected connection handle %d", conn_handle);
}
}
/**@brief Function for handling dfu events from the Buttonless Secure DFU service
*
* @param[in] event Event from the Buttonless Secure DFU service.
*/
static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event)
{
switch (event)
{
case BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE:
{
NRF_LOG_INFO("Device is preparing to enter bootloader mode.");
// Prevent device from advertising on disconnect.
ble_adv_modes_config_t config;
advertising_config_get(&config);
config.ble_adv_on_disconnect_disabled = true;
ble_advertising_modes_config_set(&m_advertising, &config);
// Disconnect all other bonded devices that currently are connected.
// This is required to receive a service changed indication
// on bootup after a successful (or aborted) Device Firmware Update.
uint32_t conn_count = ble_conn_state_for_each_connected(disconnect, NULL);
NRF_LOG_INFO("Disconnected %d links.", conn_count);
break;
}
case BLE_DFU_EVT_BOOTLOADER_ENTER:
// YOUR_JOB: Write app-specific unwritten data to FLASH, control finalization of this
// by delaying reset by reporting false in app_shutdown_handler
NRF_LOG_INFO("Device will enter bootloader mode.");
break;
case BLE_DFU_EVT_BOOTLOADER_ENTER_FAILED:
NRF_LOG_ERROR("Request to enter bootloader mode failed asynchroneously.");
// YOUR_JOB: Take corrective measures to resolve the issue
// like calling APP_ERROR_CHECK to reset the device.
break;
case BLE_DFU_EVT_RESPONSE_SEND_ERROR:
NRF_LOG_ERROR("Request to send a response to client failed.");
// YOUR_JOB: Take corrective measures to resolve the issue
// like calling APP_ERROR_CHECK to reset the device.
APP_ERROR_CHECK(false);
break;
default:
NRF_LOG_ERROR("Unknown event from ble_dfu_buttonless.");
break;
}
}
/**@brief Function for initializing DFU Service.
*/
static void dfu_init(void)
{
uint32_t err_code;
ble_dfu_buttonless_init_t dfus_init = {0};
dfus_init.evt_handler = ble_dfu_evt_handler;
err_code = ble_dfu_buttonless_init(&dfus_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing HID Service.
*/
static void hids_init(void)
{
ret_code_t err_code;
ble_hids_init_t hids_init_obj;
ble_hids_inp_rep_init_t * p_input_report;
ble_hids_outp_rep_init_t * p_output_report;
ble_hids_feature_rep_init_t * p_feature_report;
uint8_t hid_info_flags;
static ble_hids_inp_rep_init_t input_report_array[INPUT_REPORT_COUNT];
static ble_hids_outp_rep_init_t output_report_array[1];
static ble_hids_feature_rep_init_t feature_report_array[1];
static uint8_t rep_map_data[] =
{
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x02, // Usage (Mouse)
0xA1, 0x01, // Collection (Application)
// Report ID 1: Mouse buttons + scroll/pan
0x85, 0x01, // Report Id 1
0x09, 0x01, // Usage (Pointer)
0xA1, 0x00, // Collection (Physical)
0x95, 0x05, // Report Count (3)
0x75, 0x01, // Report Size (1)
0x05, 0x09, // Usage Page (Buttons)
0x19, 0x01, // Usage Minimum (01)
0x29, 0x05, // Usage Maximum (05)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x81, 0x02, // Input (Data, Variable, Absolute)
0x95, 0x01, // Report Count (1)
0x75, 0x03, // Report Size (3)
0x81, 0x01, // Input (Constant) for padding
0x75, 0x08, // Report Size (8)
0x95, 0x01, // Report Count (1)
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x38, // Usage (Wheel)
0x15, 0x81, // Logical Minimum (-127)
0x25, 0x7F, // Logical Maximum (127)
0x81, 0x06, // Input (Data, Variable, Relative)
0x05, 0x0C, // Usage Page (Consumer)
0x0A, 0x38, 0x02, // Usage (AC Pan)
0x95, 0x01, // Report Count (1)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0xC0, // End Collection (Physical)
// Report ID 2: Mouse motion
0x85, 0x02, // Report Id 2
0x09, 0x01, // Usage (Pointer)
0xA1, 0x00, // Collection (Physical)
0x75, 0x0C, // Report Size (12)
0x95, 0x02, // Report Count (2)
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x16, 0x01, 0xF8, // Logical maximum (2047)
0x26, 0xFF, 0x07, // Logical minimum (-2047)
0x81, 0x06, // Input (Data, Variable, Relative)
0xC0, // End Collection (Physical)
0xC0, // End Collection (Application)
// Report ID 3: Advanced buttons
0x05, 0x0C, // Usage Page (Consumer)
0x09, 0x01, // Usage (Consumer Control)
0xA1, 0x01, // Collection (Application)
0x85, 0x03, // Report Id (3)
0x15, 0x00, // Logical minimum (0)
0x25, 0x01, // Logical maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x01, // Report Count (1)
0x09, 0xCD, // Usage (Play/Pause)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x0A, 0x83, 0x01, // Usage (AL Consumer Control Configuration)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x09, 0xB5, // Usage (Scan Next Track)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x09, 0xB6, // Usage (Scan Previous Track)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x09, 0xEA, // Usage (Volume Down)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x09, 0xE9, // Usage (Volume Up)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x0A, 0x25, 0x02, // Usage (AC Forward)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0x0A, 0x24, 0x02, // Usage (AC Back)
0x81, 0x06, // Input (Data,Value,Relative,Bit Field)
0xC0, // End Collection
// Report ID 4: Key board
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x06, // Usage (Keyboard)
0xA1, 0x01, // Collection (Application)
0x85, 0x04, // Report Id (4)
0x05, 0x07, // Usage Page (Key Codes)
0x19, 0xe0, // Usage Minimum (224)
0x29, 0xe7, // Usage Maximum (231)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x08, // Report Count (8)
0x81, 0x02, // Input (Data, Variable, Absolute)
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0x81, 0x01, // Input (Constant) reserved byte(1)
0x95, 0x05, // Report Count (5)
0x75, 0x01, // Report Size (1)
0x05, 0x08, // Usage Page (Page# for LEDs)
0x19, 0x01, // Usage Minimum (1)
0x29, 0x05, // Usage Maximum (5)
0x91, 0x02, // Output (Data, Variable, Absolute), Led report
0x95, 0x01, // Report Count (1)
0x75, 0x03, // Report Size (3)
0x91, 0x01, // Output (Data, Variable, Absolute), Led report padding
0x95, 0x06, // Report Count (6)
0x75, 0x08, // Report Size (8)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x65, // Logical Maximum (101)
0x05, 0x07, // Usage Page (Key codes)
0x19, 0x00, // Usage Minimum (0)
0x29, 0x65, // Usage Maximum (101)
0x81, 0x00, // Input (Data, Array) Key array(6 bytes)
0x09, 0x05, // Usage (Vendor Defined)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8 bit)
0x95, 0x02, // Report Count (2)
0xB1, 0x02, // Feature (Data, Variable, Absolute)
0xC0 // End Collection (Application)
};
//Key
memset((void *)input_report_array, 0, sizeof(ble_hids_inp_rep_init_t));
memset((void *)output_report_array, 0, sizeof(ble_hids_outp_rep_init_t));
memset((void *)feature_report_array, 0, sizeof(ble_hids_feature_rep_init_t));
// Initialize HID Service.
p_input_report = &input_report_array[INPUT_REP_BUTTONS_INDEX];
p_input_report->max_len = INPUT_REP_BUTTONS_LEN;
p_input_report->rep_ref.report_id = INPUT_REP_REF_BUTTONS_ID;
p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT;
p_input_report->sec.cccd_wr = SEC_JUST_WORKS;
p_input_report->sec.wr = SEC_JUST_WORKS;
p_input_report->sec.rd = SEC_JUST_WORKS;
p_input_report = &input_report_array[INPUT_REP_MOVEMENT_INDEX];
p_input_report->max_len = INPUT_REP_MOVEMENT_LEN;
p_input_report->rep_ref.report_id = INPUT_REP_REF_MOVEMENT_ID;
p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT;
p_input_report->sec.cccd_wr = SEC_JUST_WORKS;
p_input_report->sec.wr = SEC_JUST_WORKS;
p_input_report->sec.rd = SEC_JUST_WORKS;
p_input_report = &input_report_array[INPUT_REP_MPLAYER_INDEX];
p_input_report->max_len = INPUT_REP_MEDIA_PLAYER_LEN;
p_input_report->rep_ref.report_id = INPUT_REP_REF_MPLAYER_ID;
p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT;
p_input_report->sec.cccd_wr = SEC_JUST_WORKS;
p_input_report->sec.wr = SEC_JUST_WORKS;
p_input_report->sec.rd = SEC_JUST_WORKS;
//Key
p_input_report = &input_report_array[INPUT_REPORT_KEYS_INDEX];
p_input_report->max_len = INPUT_REPORT_KEYS_MAX_LEN;
p_input_report->rep_ref.report_id = INPUT_REP_REF_ID;
p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT;
p_input_report->sec.cccd_wr = SEC_JUST_WORKS;
p_input_report->sec.wr = SEC_JUST_WORKS;
p_input_report->sec.rd = SEC_JUST_WORKS;
p_output_report = &output_report_array[OUTPUT_REPORT_INDEX];
p_output_report->max_len = OUTPUT_REPORT_MAX_LEN;
p_output_report->rep_ref.report_id = OUTPUT_REP_REF_ID;
p_output_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_OUTPUT;
p_output_report->sec.wr = SEC_JUST_WORKS;
p_output_report->sec.rd = SEC_JUST_WORKS;
p_feature_report = &feature_report_array[FEATURE_REPORT_INDEX];
p_feature_report->max_len = FEATURE_REPORT_MAX_LEN;
p_feature_report->rep_ref.report_id = FEATURE_REP_REF_ID;
p_feature_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_FEATURE;
p_feature_report->sec.rd = SEC_JUST_WORKS;
p_feature_report->sec.wr = SEC_JUST_WORKS;
hid_info_flags = HID_INFO_FLAG_REMOTE_WAKE_MSK | HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK;
memset(&hids_init_obj, 0, sizeof(hids_init_obj));
hids_init_obj.evt_handler = on_hids_evt;
hids_init_obj.error_handler = service_error_handler;
hids_init_obj.is_kb = true;
hids_init_obj.is_mouse = true;
hids_init_obj.inp_rep_count = INPUT_REPORT_COUNT;
hids_init_obj.p_inp_rep_array = input_report_array;
hids_init_obj.outp_rep_count = 1;
hids_init_obj.p_outp_rep_array = output_report_array;
hids_init_obj.feature_rep_count = 1;
hids_init_obj.p_feature_rep_array = feature_report_array;
hids_init_obj.rep_map.data_len = sizeof(rep_map_data);
hids_init_obj.rep_map.p_data = rep_map_data;
hids_init_obj.hid_information.bcd_hid = BASE_USB_HID_SPEC_VERSION;
hids_init_obj.hid_information.b_country_code = 0;
hids_init_obj.hid_information.flags = hid_info_flags;
hids_init_obj.included_services_count = 0;
hids_init_obj.p_included_services_array = NULL;
hids_init_obj.rep_map.rd_sec = SEC_JUST_WORKS;
hids_init_obj.hid_information.rd_sec = SEC_JUST_WORKS;
//Key
hids_init_obj.boot_kb_inp_rep_sec.cccd_wr = SEC_JUST_WORKS;
hids_init_obj.boot_kb_inp_rep_sec.rd = SEC_JUST_WORKS;
hids_init_obj.boot_kb_outp_rep_sec.rd = SEC_JUST_WORKS;
hids_init_obj.boot_kb_outp_rep_sec.wr = SEC_JUST_WORKS;
hids_init_obj.boot_mouse_inp_rep_sec.cccd_wr = SEC_JUST_WORKS;
hids_init_obj.boot_mouse_inp_rep_sec.wr = SEC_JUST_WORKS;
hids_init_obj.boot_mouse_inp_rep_sec.rd = SEC_JUST_WORKS;
hids_init_obj.protocol_mode_rd_sec = SEC_JUST_WORKS;
hids_init_obj.protocol_mode_wr_sec = SEC_JUST_WORKS;
hids_init_obj.ctrl_point_wr_sec = SEC_JUST_WORKS;
err_code = ble_hids_init(&m_hids, &hids_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
qwr_init();
dis_init();
bas_init();
hids_init();
dfu_init();
}
/**@brief Function for initializing the battery sensor simulator.
*/
//static void sensor_simulator_init(void)
//{
// m_battery_sim_cfg.min = MIN_BATTERY_LEVEL;
// m_battery_sim_cfg.max = MAX_BATTERY_LEVEL;
// m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT;
// m_battery_sim_cfg.start_at_max = true;
// sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg);
//}
/**@brief Function for handling a Connection Parameters error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for initializing the Connection Parameters module.
*/
static void conn_params_init(void)
{
ret_code_t err_code;
ble_conn_params_init_t cp_init;
memset(&cp_init, 0, sizeof(cp_init));
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
cp_init.max_conn_params_update_count = MAX_CONN_PARAM_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
cp_init.evt_handler = NULL;
cp_init.error_handler = conn_params_error_handler;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for starting timers.
*/
static void timers_start(void)
{
ret_code_t err_code;
err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for transmitting a key scan Press & Release Notification.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] p_instance Identifies the service for which Key Notifications are requested.
* @param[in] p_key_pattern Pointer to key pattern.
* @param[in] pattern_len Length of key pattern. 0 < pattern_len < 7.
* @param[in] pattern_offset Offset applied to Key Pattern for transmission.
* @param[out] actual_len Provides actual length of Key Pattern transmitted, making buffering of
* rest possible if needed.
* @return NRF_SUCCESS on success, NRF_ERROR_RESOURCES in case transmission could not be
* completed due to lack of transmission buffer or other error codes indicating reason
* for failure.
*
* @note In case of NRF_ERROR_RESOURCES, remaining pattern that could not be transmitted
* can be enqueued \ref buffer_enqueue function.
* In case a pattern of 'cofFEe' is the p_key_pattern, with pattern_len as 6 and
* pattern_offset as 0, the notifications as observed on the peer side would be
* 1> 'c', 'o', 'f', 'F', 'E', 'e'
* 2> - , 'o', 'f', 'F', 'E', 'e'
* 3> - , -, 'f', 'F', 'E', 'e'
* 4> - , -, -, 'F', 'E', 'e'
* 5> - , -, -, -, 'E', 'e'
* 6> - , -, -, -, -, 'e'
* 7> - , -, -, -, -, -
* Here, '-' refers to release, 'c' refers to the key character being transmitted.
* Therefore 7 notifications will be sent.
* In case an offset of 4 was provided, the pattern notifications sent will be from 5-7
* will be transmitted.
*/
static uint32_t send_key_scan_press_release(ble_hids_t * p_hids,
uint8_t * p_key_pattern,
uint16_t pattern_len,
uint16_t pattern_offset,
uint16_t * p_actual_len)
{
ret_code_t err_code;
uint16_t offset;
uint16_t data_len;
uint8_t data[INPUT_REPORT_KEYS_MAX_LEN];
// HID Report Descriptor enumerates an array of size 6, the pattern hence shall not be any
// longer than this.
STATIC_ASSERT((INPUT_REPORT_KEYS_MAX_LEN - 2) == 6);
ASSERT(pattern_len <= (INPUT_REPORT_KEYS_MAX_LEN - 2));
offset = pattern_offset;
data_len = pattern_len;
do
{
// Reset the data buffer.
memset(data, 0, sizeof(data));
// Copy the scan code.
memcpy(data + SCAN_CODE_POS + offset, p_key_pattern + offset, data_len - offset);
// if (bsp_button_is_pressed(SHIFT_BUTTON_ID))
// {
// data[MODIFIER_KEY_POS] |= SHIFT_KEY_CODE;
// }
data[MODIFIER_KEY_POS] |= SHIFT_KEY_CODE;
if (!m_in_boot_mode)
{
err_code = ble_hids_inp_rep_send(p_hids,
INPUT_REPORT_KEYS_INDEX,
INPUT_REPORT_KEYS_MAX_LEN,
data,
m_conn_handle);
}
else
{
err_code = ble_hids_boot_kb_inp_rep_send(p_hids,
INPUT_REPORT_KEYS_MAX_LEN,
data,
m_conn_handle);
}
if (err_code != NRF_SUCCESS)
{
break;
}
offset++;
}
while (offset <= data_len);
*p_actual_len = offset;
return err_code;
}
/**@brief Function for initializing the buffer queue used to key events that could not be
* transmitted
*
* @warning This handler is an example only. You need to analyze how you wish to buffer or buffer at
* all.
*
* @note In case of HID keyboard, a temporary buffering could be employed to handle scenarios
* where encryption is not yet enabled or there was a momentary link loss or there were no
* Transmit buffers.
*/
static void buffer_init(void)
{
uint32_t buffer_count;
BUFFER_LIST_INIT();
for (buffer_count = 0; buffer_count < MAX_BUFFER_ENTRIES; buffer_count++)
{
BUFFER_ELEMENT_INIT(buffer_count);
}
}
/**@brief Function for enqueuing key scan patterns that could not be transmitted either completely
* or partially.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] p_hids Identifies the service for which Key Notifications are buffered.
* @param[in] p_key_pattern Pointer to key pattern.
* @param[in] pattern_len Length of key pattern.
* @param[in] offset Offset applied to Key Pattern when requesting a transmission on
* dequeue, @ref buffer_dequeue.
* @return NRF_SUCCESS on success, else an error code indicating reason for failure.
*/
static uint32_t buffer_enqueue(ble_hids_t * p_hids,
uint8_t * p_key_pattern,
uint16_t pattern_len,
uint16_t offset)
{
buffer_entry_t * element;
uint32_t err_code = NRF_SUCCESS;
if (BUFFER_LIST_FULL())
{
// Element cannot be buffered.
err_code = NRF_ERROR_NO_MEM;
}
else
{
// Make entry of buffer element and copy data.
element = &buffer_list.buffer[(buffer_list.wp)];
element->p_instance = p_hids;
element->p_data = p_key_pattern;
element->data_offset = offset;
element->data_len = pattern_len;
buffer_list.count++;
buffer_list.wp++;
if (buffer_list.wp == MAX_BUFFER_ENTRIES)
{
buffer_list.wp = 0;
}
}
return err_code;
}
/**@brief Function to dequeue key scan patterns that could not be transmitted either completely of
* partially.
*
* @warning This handler is an example only. You need to analyze how you wish to send the key
* release.
*
* @param[in] tx_flag Indicative of whether the dequeue should result in transmission or not.
* @note A typical example when all keys are dequeued with transmission is when link is
* disconnected.
*
* @return NRF_SUCCESS on success, else an error code indicating reason for failure.
*/
static uint32_t buffer_dequeue(bool tx_flag)
{
buffer_entry_t * p_element;
uint32_t err_code = NRF_SUCCESS;
uint16_t actual_len;
if (BUFFER_LIST_EMPTY())
{
err_code = NRF_ERROR_NOT_FOUND;
}
else
{
bool remove_element = true;
p_element = &buffer_list.buffer[(buffer_list.rp)];
if (tx_flag)
{
err_code = send_key_scan_press_release(p_element->p_instance,
p_element->p_data,
p_element->data_len,
p_element->data_offset,
&actual_len);
// An additional notification is needed for release of all keys, therefore check
// is for actual_len <= element->data_len and not actual_len < element->data_len
if ((err_code == NRF_ERROR_RESOURCES) && (actual_len <= p_element->data_len))
{
// Transmission could not be completed, do not remove the entry, adjust next data to
// be transmitted
p_element->data_offset = actual_len;
remove_element = false;
}
}
if (remove_element)
{
BUFFER_ELEMENT_INIT(buffer_list.rp);
buffer_list.rp++;
buffer_list.count--;
if (buffer_list.rp == MAX_BUFFER_ENTRIES)
{
buffer_list.rp = 0;
}
}
}
return err_code;
}
/**@brief Function for sending sample key presses to the peer.
*
* @param[in] key_pattern_len Pattern length.
* @param[in] p_key_pattern Pattern to be sent.
*/
void keys_send(uint8_t key_pattern_len, uint8_t * p_key_pattern)
{
ret_code_t err_code;
uint16_t actual_len;
err_code = send_key_scan_press_release(&m_hids,
p_key_pattern,
key_pattern_len,
0,
&actual_len);
// An additional notification is needed for release of all keys, therefore check
// is for actual_len <= key_pattern_len and not actual_len < key_pattern_len.
if ((err_code == NRF_ERROR_RESOURCES) && (actual_len <= key_pattern_len))
{
// Buffer enqueue routine return value is not intentionally checked.
// Rationale: Its better to have a a few keys missing than have a system
// reset. Recommendation is to work out most optimal value for
// MAX_BUFFER_ENTRIES to minimize chances of buffer queue full condition
UNUSED_VARIABLE(buffer_enqueue(&m_hids, p_key_pattern, key_pattern_len, actual_len));
}
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != NRF_ERROR_BUSY) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
/**@brief Function for handling the HID Report Characteristic Write event.
*
* @param[in] p_evt HID service event.
*/
static void on_hid_rep_char_write(ble_hids_evt_t * p_evt)
{
if (p_evt->params.char_write.char_id.rep_type == BLE_HIDS_REP_TYPE_OUTPUT)
{
ret_code_t err_code;
uint8_t report_val;
uint8_t report_index = p_evt->params.char_write.char_id.rep_index;
if (report_index == OUTPUT_REPORT_INDEX)
{
// This code assumes that the output report is one byte long. Hence the following
// static assert is made.
STATIC_ASSERT(OUTPUT_REPORT_MAX_LEN == 1);
err_code = ble_hids_outp_rep_get(&m_hids,
report_index,
OUTPUT_REPORT_MAX_LEN,
0,
m_conn_handle,
&report_val);
APP_ERROR_CHECK(err_code);
if (!m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) != 0))
{
// Caps Lock is turned On.
NRF_LOG_INFO("Caps Lock is turned On!");
// err_code = bsp_indication_set(BSP_INDICATE_ALERT_3);
// APP_ERROR_CHECK(err_code);
keys_send(sizeof(m_caps_on_key_scan_str), m_caps_on_key_scan_str);
m_caps_on = true;
}
else if (m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) == 0))
{
// Caps Lock is turned Off .
NRF_LOG_INFO("Caps Lock is turned Off!");
// err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF);
// APP_ERROR_CHECK(err_code);
keys_send(sizeof(m_caps_off_key_scan_str), m_caps_off_key_scan_str);
m_caps_on = false;
}
else
{
// The report received is not supported by this application. Do nothing.
}
}
}
}
/**@brief Function for putting the chip into sleep mode.
*
* @note This function will not return.
*/
//static void sleep_mode_enter(void)
//{
// ret_code_t err_code;
// err_code = bsp_indication_set(BSP_INDICATE_IDLE);
// APP_ERROR_CHECK(err_code);
// // Prepare wakeup buttons.
// err_code = bsp_btn_ble_sleep_mode_prepare();
// APP_ERROR_CHECK(err_code);
// // Go to system-off mode (this function will not return; wakeup will cause a reset).
// err_code = sd_power_system_off();
// APP_ERROR_CHECK(err_code);
//}
/**@brief Function for handling HID events.
*
* @details This function will be called for all HID events which are passed to the application.
*
* @param[in] p_hids HID service structure.
* @param[in] p_evt Event received from the HID service.
*/
static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt)
{
switch (p_evt->evt_type)
{
case BLE_HIDS_EVT_BOOT_MODE_ENTERED:
m_in_boot_mode = true;
break;
case BLE_HIDS_EVT_REPORT_MODE_ENTERED:
m_in_boot_mode = false;
break;
case BLE_HIDS_EVT_REP_CHAR_WRITE:
on_hid_rep_char_write(p_evt);
break;
case BLE_HIDS_EVT_NOTIF_ENABLED:
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for handling advertising events.
*
* @details This function will be called for advertising events which are passed to the application.
*
* @param[in] ble_adv_evt Advertising event.
*/
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
ret_code_t err_code;
switch (ble_adv_evt)
{
case BLE_ADV_EVT_DIRECTED_HIGH_DUTY:
NRF_LOG_INFO("Directed advertising.");
// err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED);
// APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_FAST:
NRF_LOG_INFO("Fast advertising.");
// err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
// APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_SLOW:
NRF_LOG_INFO("Slow advertising.");
#if SWIFT_PAIR_SUPPORTED == 1
m_sp_advdata.p_manuf_specific_data = NULL;
err_code = ble_advertising_advdata_update(&m_advertising, &m_sp_advdata, NULL);
APP_ERROR_CHECK(err_code);
#endif
// err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW);
// APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_FAST_WHITELIST:
NRF_LOG_INFO("Fast advertising with whitelist.");
// err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
// APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_SLOW_WHITELIST:
NRF_LOG_INFO("Slow advertising with whitelist.");
// err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST);
// APP_ERROR_CHECK(err_code);
err_code = ble_advertising_restart_without_whitelist(&m_advertising);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_IDLE:
// err_code = bsp_indication_set(BSP_INDICATE_IDLE);
// APP_ERROR_CHECK(err_code);
// sleep_mode_enter();
NRF_LOG_INFO("Device stop advertising.");
m_hid_data.ble_status = DEVICE_ADV_STOP;
break;
case BLE_ADV_EVT_WHITELIST_REQUEST:
{
ble_gap_addr_t whitelist_addrs[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
ble_gap_irk_t whitelist_irks[BLE_GAP_WHITELIST_ADDR_MAX_COUNT];
uint32_t addr_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
uint32_t irk_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT;
err_code = pm_whitelist_get(whitelist_addrs, &addr_cnt,
whitelist_irks, &irk_cnt);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEBUG("pm_whitelist_get returns %d addr in whitelist and %d irk whitelist",
addr_cnt,
irk_cnt);
// Set the correct identities list (no excluding peers with no Central Address Resolution).
identities_set(PM_PEER_ID_LIST_SKIP_NO_IRK);
// Apply the whitelist.
err_code = ble_advertising_whitelist_reply(&m_advertising,
whitelist_addrs,
addr_cnt,
whitelist_irks,
irk_cnt);
APP_ERROR_CHECK(err_code);
}
break;
case BLE_ADV_EVT_PEER_ADDR_REQUEST:
{
pm_peer_data_bonding_t peer_bonding_data;
// Only Give peer address if we have a handle to the bonded peer.
if (m_peer_id != PM_PEER_ID_INVALID)
{
err_code = pm_peer_data_bonding_load(m_peer_id, &peer_bonding_data);
if (err_code != NRF_ERROR_NOT_FOUND)
{
APP_ERROR_CHECK(err_code);
// Manipulate identities to exclude peers with no Central Address Resolution.
identities_set(PM_PEER_ID_LIST_SKIP_ALL);
ble_gap_addr_t * p_peer_addr = &(peer_bonding_data.peer_ble_id.id_addr_info);
err_code = ble_advertising_peer_addr_reply(&m_advertising, p_peer_addr);
APP_ERROR_CHECK(err_code);
}
}
break;
}
default:
break;
}
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
ret_code_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
NRF_LOG_INFO("Connected");
// err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
// APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
APP_ERROR_CHECK(err_code);
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
{
m_hid_data.ble_status = DEVICE_CONNECTED;
}
break;
case BLE_GAP_EVT_DISCONNECTED:
if(m_hid_data.ble_status == DEVICE_LOW_POWER_WAIT)
{
sd_ble_gap_adv_stop(m_advertising.adv_handle);
NRF_LOG_INFO("Disconnected low power stop adv.");
}else
{
m_hid_data.ble_status = DEVICE_DISCONNECTED;
NRF_LOG_INFO("Disconnected timeout.");
}
// LED indication will be changed when advertising starts.
(void) buffer_dequeue(false);
// Reset m_caps_on variable. Upon reconnect, the HID host will re-send the Output
// report containing the Caps lock state.
m_caps_on = false;
m_hid_data.peer_manage = false;
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
{
NRF_LOG_DEBUG("PHY update request.");
ble_gap_phys_t const phys =
{
.rx_phys = BLE_GAP_PHY_AUTO,
.tx_phys = BLE_GAP_PHY_AUTO,
};
err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
APP_ERROR_CHECK(err_code);
} break;
case BLE_GATTS_EVT_HVN_TX_COMPLETE:
// Send next key event
(void) buffer_dequeue(true);
break;
case BLE_GATTC_EVT_TIMEOUT:
// Disconnect on GATT Client timeout event.
NRF_LOG_DEBUG("GATT Client Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server timeout event.
NRF_LOG_DEBUG("GATT Server Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
// Configure the BLE stack using the default settings.
// Fetch the start address of the application RAM.
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
/**@brief Function for the Peer Manager initialization.
*/
static void peer_manager_init(void)
{
ble_gap_sec_params_t sec_param;
ret_code_t err_code;
err_code = pm_init();
APP_ERROR_CHECK(err_code);
memset(&sec_param, 0, sizeof(ble_gap_sec_params_t));
// Security parameters to be used for all security procedures.
sec_param.bond = SEC_PARAM_BOND;
sec_param.mitm = SEC_PARAM_MITM;
sec_param.lesc = SEC_PARAM_LESC;
sec_param.keypress = SEC_PARAM_KEYPRESS;
sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES;
sec_param.oob = SEC_PARAM_OOB;
sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
sec_param.kdist_own.enc = 1;
sec_param.kdist_own.id = 1;
sec_param.kdist_peer.enc = 1;
sec_param.kdist_peer.id = 1;
err_code = pm_sec_params_set(&sec_param);
APP_ERROR_CHECK(err_code);
err_code = pm_register(pm_evt_handler);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the Advertising functionality.
*/
static void advertising_init(void)
{
ret_code_t err_code;
uint8_t adv_flags;
ble_advertising_init_t init;
memset(&init, 0, sizeof(init));
adv_flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
init.advdata.name_type = BLE_ADVDATA_FULL_NAME;
init.advdata.include_appearance = true;
init.advdata.flags = adv_flags;
init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
init.advdata.uuids_complete.p_uuids = m_adv_uuids;
#if SWIFT_PAIR_SUPPORTED == 1
init.advdata.p_manuf_specific_data = &m_sp_manuf_advdata;
memcpy(&m_sp_advdata, &init.advdata, sizeof(m_sp_advdata));
#endif
init.config.ble_adv_whitelist_enabled = true;
init.config.ble_adv_directed_high_duty_enabled = true;
init.config.ble_adv_directed_enabled = false;
init.config.ble_adv_directed_interval = 0;
init.config.ble_adv_directed_timeout = 0;
init.config.ble_adv_fast_enabled = true;
init.config.ble_adv_fast_interval = APP_ADV_FAST_INTERVAL;
init.config.ble_adv_fast_timeout = APP_ADV_FAST_DURATION;
init.config.ble_adv_slow_enabled = true;
init.config.ble_adv_slow_interval = APP_ADV_SLOW_INTERVAL;
init.config.ble_adv_slow_timeout = APP_ADV_SLOW_DURATION;
init.evt_handler = on_adv_evt;
init.error_handler = ble_advertising_error_handler;
err_code = ble_advertising_init(&m_advertising, &init);
APP_ERROR_CHECK(err_code);
ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}
/**@brief Function for the Event Scheduler initialization.
*/
static void scheduler_init(void)
{
APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
}
/**@brief Function for sending a Mouse Movement.
*
* @param[in] x_delta Horizontal movement.
* @param[in] y_delta Vertical movement.
*/
void mouse_movement_send(int16_t x_delta, int16_t y_delta)
{
ret_code_t err_code;
if (m_hid_data.peer_manage == true)
{
if (m_in_boot_mode)
{
x_delta = MIN(x_delta, 0x00ff);
y_delta = MIN(y_delta, 0x00ff);
err_code = ble_hids_boot_mouse_inp_rep_send(&m_hids,
0x00,
(int8_t)x_delta,
(int8_t)y_delta,
0,
NULL,
m_conn_handle);
}
else
{
uint8_t buffer[INPUT_REP_MOVEMENT_LEN];
APP_ERROR_CHECK_BOOL(INPUT_REP_MOVEMENT_LEN == 3);
x_delta = MIN(x_delta, 0x0fff);
y_delta = MIN(y_delta, 0x0fff);
buffer[0] = x_delta & 0x00ff;
buffer[1] = ((y_delta & 0x000f) << 4) | ((x_delta & 0x0f00) >> 8);
buffer[2] = (y_delta & 0x0ff0) >> 4;
err_code = ble_hids_inp_rep_send(&m_hids,
INPUT_REP_MOVEMENT_INDEX,
INPUT_REP_MOVEMENT_LEN,
buffer,
m_conn_handle);
}
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != NRF_ERROR_BUSY) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
}
/**@brief Function for media data.
*
* @param[in] control --- hid media data
*
*/
void m_button_media_player_control(uint8_t control)
{
uint32_t err_code;
uint8_t buffer[1];
buffer[0] = control;
if (m_hid_data.peer_manage == true)
{
err_code = ble_hids_inp_rep_send( &m_hids,
INPUT_REP_MPLAYER_INDEX,
1,
buffer,
m_conn_handle);
if(( err_code != NRF_SUCCESS ) &&
( err_code != NRF_ERROR_INVALID_STATE ) &&
( err_code != NRF_ERROR_RESOURCES ) &&
( err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING ))
{
APP_ERROR_HANDLER( err_code );
}
buffer[0] = 0;
err_code = ble_hids_inp_rep_send( &m_hids,
INPUT_REP_MPLAYER_INDEX,
1,
buffer,
m_conn_handle);
if(( err_code != NRF_SUCCESS ) &&
( err_code != NRF_ERROR_INVALID_STATE ) &&
( err_code != NRF_ERROR_RESOURCES ) &&
( err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING ))
{
APP_ERROR_HANDLER( err_code );
}
}
}
/**@brief Function for buttons
*
* @param[in] buttons --- hid media data
*
* @details click 1 2 4 左 右 中
wheel -127 to +127 上下滑动
pan -127 to +127 左右滑动
*/
void mouse_buttons_send(int8_t click, int8_t wheel, int8_t pan)
{
uint32_t err_code;
uint8_t buffer[INPUT_REP_BUTTONS_LEN];
if (m_hid_data.peer_manage == true)
{
APP_ERROR_CHECK_BOOL(INPUT_REP_BUTTONS_LEN == 3);
// NRF_LOG_INFO("mouse_buttons_send\r\n");
buffer[0] = click;
buffer[1] = wheel;
buffer[2] = pan;
err_code = ble_hids_inp_rep_send( &m_hids,
INPUT_REP_BUTTONS_INDEX,
INPUT_REP_BUTTONS_LEN,
buffer,
m_conn_handle);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
}
/**@brief Function for handling events from the BSP module.
*
* @param[in] event Event generated by button press.
*/
//static void bsp_event_handler(bsp_event_t event)
//{
// ret_code_t err_code;
// switch (event)
// {
// case BSP_EVENT_SLEEP:
// sleep_mode_enter();
// break;
// case BSP_EVENT_DISCONNECT:
// err_code = sd_ble_gap_disconnect(m_conn_handle,
// BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
// if (err_code != NRF_ERROR_INVALID_STATE)
// {
// APP_ERROR_CHECK(err_code);
// }
// break;
// case BSP_EVENT_WHITELIST_OFF:
// if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
// {
// err_code = ble_advertising_restart_without_whitelist(&m_advertising);
// if (err_code != NRF_ERROR_INVALID_STATE)
// {
// APP_ERROR_CHECK(err_code);
// }
// }
// break;
// case BSP_EVENT_KEY_0:
// if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
// {
// mouse_movement_send(-MOVEMENT_SPEED, 0);
// }
// break;
// case BSP_EVENT_KEY_1:
// if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
// {
// mouse_movement_send(0, -MOVEMENT_SPEED);
// }
// break;
// case BSP_EVENT_KEY_2:
// if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
// {
// mouse_movement_send(MOVEMENT_SPEED, 0);
// }
// break;
// case BSP_EVENT_KEY_3:
// if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
// {
// mouse_movement_send(0, MOVEMENT_SPEED);
// }
// break;
// default:
// break;
// }
//}
/**@brief Function for initializing buttons and leds.
*
* @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up.
*/
//static void buttons_leds_init(bool * p_erase_bonds)
//{
// ret_code_t err_code;
// bsp_event_t startup_event;
// err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
// APP_ERROR_CHECK(err_code);
// err_code = bsp_btn_ble_init(NULL, &startup_event);
// APP_ERROR_CHECK(err_code);
// *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
//}
/**@brief Function for initializing the nrf log module.
*/
static void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEFAULT_BACKENDS_INIT();
}
/**@brief Function for initializing power management.
*/
static void power_management_init(void)
{
ret_code_t err_code;
err_code = nrf_pwr_mgmt_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling the idle state (main loop).
*
* @details If there is no pending log operation, then sleep until next the next event occurs.
*/
static void idle_state_handle(void)
{
app_sched_execute();
if (NRF_LOG_PROCESS() == false)
{
nrf_pwr_mgmt_run();
}
}
/**@brief Function for start advertising.
*/
void m_adv_start(void)
{
advertising_start(false);
}
/**@brief Function for disconnect.
*/
void m_adv_disconnect(void)
{
ret_code_t err_code;
if (m_conn_handle != BLE_CONN_HANDLE_INVALID)//连接状态
{
err_code = sd_ble_gap_disconnect(m_conn_handle,
BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
}else//非连接状态
{
m_pwm_stop();
err_code = sd_ble_gap_adv_stop(m_advertising.adv_handle);
APP_ERROR_CHECK(err_code);
NRF_LOG_INFO("Normal low power stop adv.");
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds = false;
ret_code_t err_code;
// Initialize.
log_init();
// Initialize the async SVCI interface to bootloader before any interrupts are enabled.
// err_code = ble_dfu_buttonless_async_svci_init();
// APP_ERROR_CHECK(err_code);
timers_init();
sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
// buttons_leds_init(&erase_bonds);
power_management_init();
ble_stack_init();
scheduler_init();
gap_params_init();
gatt_init();
advertising_init();
services_init();
// sensor_simulator_init();
conn_params_init();
buffer_init();
peer_manager_init();
// Start execution.
NRF_LOG_INFO("HID Mouse example started.");
timers_start();
advertising_start(erase_bonds);
m_platform_init();
m_twi_init(); //TWI init
m_pwm_common_init();//PWM init
m_paw3003_check();
m_button_init();
m_paw3003_init();
m_system_timer_init();
m_led_timer_init();
// Enter main loop.
for (;;)
{
m_application_handle();
m_led_handle();
idle_state_handle();
}
}
/**
* @}
*/
