With fresh install, ble_app_template_s110 fails to load

[Bret Foreman]

After a fresh install of Keil (along with Legacy patches) and the SDK, I get the following messages when I try to open the ble_app_template_s110 project:

The project does build. But when I try to download it I get the following messages:

The log looks like this:

Target info:
------------
Device: nRF51422_xxAC
VTarget = 3.300V
State of Pins: 
TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 1
Hardware-Breakpoints: 4
Software-Breakpoints: 8192
Watchpoints:          2
JTAG speed: 1000 kHz
 
Erase Failed!
Error: Flash Download failed  -  "Cortex-M0"
Flash Load finished at 11:28:55

I see other questions here from people with the same problem and the fix seems to be an "uninstall" and reinstall. That didn't work for me but I suspect it's because I'm not sure what an "uninstall" consists of. Is there a step-by-step list of what steps I need to do for an uninstall to fix this problem?

[MartinBL]

Copy paste from your post here:

It looks like you are using old J-Link USB drivers. So first please try to upgrade your drivers. You'll find the latest J-LInk drivers here and you can update the Segger IC firmware on your kit by using the Segger J-Link Configuration tool. I don't really think it is the drivers that are causing your problems though.

Have you installed the latest Microcontroller Development Kit, nRF5x_MDK_8_0_3_Keil4 found in the SDK zip file?

Have you seen this and this link?

[Bret Foreman]

I updated the J-Link USB drivers and Segger firmware and it didn't help.

I verified that the version of the SDK that I have installed is the same as the one referenced above (9.0.0_2e23562).

I tried to follow this set of instructions: link

But the Nordic device is not in the list of flash download targets. I guess something is going wrong with the SDK installation. Are there some installer logs somewhere I can look at?