TWIM (I2C) on NCS is not working properly.

[Yoshihiro Goto]

First of all, the fast mode should be 400kHz, but it seems to be only 200kHz according to the waveform. Also, the duty cycle seems to be wrong.

Secondly, It seems that CONFIG_I2C_CALLBACK is not working at all. I have written the callback function as follows, but it is not called.

/* Callback */

K_SEM_DEFINE(k_sem, 0, 1);

static void twim_callback(const struct device *dev, int result, void *data)

{

    printk("Callback\n");

    k_sem_give(&k_sem);

}

That is obvious since there is no log display and no semaphore to go through.

I am working on a project using TWIM and I hope these bugs will be fixed soon.

[Michal]

Hello,

Just wanted to let you know that I will get to it in the following days.

Best regards,

Michal

[Yoshihiro Goto]

>The reason is that api->transfer is null.

This reference is referring to the dev structure, which is obtained from the dts file. However, there is no definition of api->transfer in the dts file anywhere. This means it will always be null, and I think this function will fail no matter what. So why is it working?

[Yoshihiro Goto]

Hello,

Sorry, I was handling another job and neglected this matter.

As you say, i2c_nrfx_twim.c uses the i2c_driver_api structure to set up each callbacks. That of course includes i2c_nrfx_twim_transfer.
But when I actually debug the program and look into the contents of the device structure, only the address of i2c_nrfx_twim_transfer is 0(null).
What does this mean? I can think it is a bug.

[Yoshihiro Goto]

Hello,

Finally I understood. The snippet in i2c_nrfx_twim.c is wrong. Because the transfer callback element is transfer_cb, not transfer.

Here is the snippet in i2c.h.

__subsystem struct i2c_driver_api {
	i2c_api_configure_t configure;
	i2c_api_get_config_t get_config;
	i2c_api_full_io_t transfer;
	i2c_api_target_register_t target_register;
	i2c_api_target_unregister_t target_unregister;
#ifdef CONFIG_I2C_CALLBACK
	i2c_api_transfer_cb_t transfer_cb;
#endif
	i2c_api_recover_bus_t recover_bus;
};

[Michal]

Hello,

Thank you for the information. I am not exactly sure if the transfer_cb should be defined in the driver directly, but I will discuss it with the developers.

I have talked with a colleague and he has pointed me to this pull request where the I2C callbacks got implemented and there is a test example.

You may also want to just use the nrfx_twim driver directly for callbacks, since the Zephyr driver may be missing some functionality as well.

Best regards,

Michal

[Michal]

A small update: looks like callbacks are not implemented in the Nordic Zephyr I2C driver yet.

Please use nrfx_twim driver directly.

Best regards,

Michal

[Yoshihiro Goto]

Hello Michal,

Thanks for reply. I would wait that I2C callback is implemented in SDK. 

Best Regards, 

Yoshihiro Goto

[Yoshihiro Goto]

Hello everyone,

It's too late now, but the problem that I2C appears to be running at 200 kHz has been resolved. This occurs when I2C is run using the built-in pull-up.

Don't forget implement external pull-up resistor. (especially ME) 

Oh, and before I know it, there is a non-blocking i2c sample project. I solved this problem using that project.
I assume that the TWI API uses asynchronous callbacks internally, which makes it difficult to implement in the API, so this is the way to do it.