I am using two devices, both equipped with the nRF52832 chip, to send and receive messages through the Vendor Model. One device sends a custom 6-byte data packet every 50ms, for a total of 10 transmissions, which is equivalent to sending 10 packets in 500ms. The other device is responsible for receiving the data. However, the received data rarely includes all 10 packets; it is usually 9 packets, 8 packets, or 7 packets.Then, I sent two custom 6-byte data packets every 50ms, for a total of 10 transmissions, which is equivalent to sending 20 packets within 500ms. However, the received data is usually 14 packets, 18 packets, or 16 packets, and the packet loss rate is still quite high.Is there any method to solve the issue of high packet loss rate?