nRFConnect iOS APP failed to show passkey dialog with nRF52832

[snowuyl]

I use nRFConnect iOS APP to pair nRF52832 device. But it failed to show passkey dialog.

[Susheel Nuguru]

I am not sure "it failed to show passkey dialog" means?
There does not seem to be any encryption requested by either side of the device. How do you want to initiate pairing?
Please go through this case where my colleague Vidar tried to explain what is expected on the peripheral side for the pairing to work with Apple devices.

[snowuyl]

I have added the following configuration in prj.conf.

CONFIG_BT_FIXED_PASSKEY=y
CONFIG_BT_GATT_AUTO_SEC_REQ=y

CONFIG_BT_SMP=y

And I also add the following code in bt.c for static pairing

bt_passkey_set(123456); // in btInit()

bt_conn_set_security(conn, BT_SECURITY_L2); // in connected() callback function

Now nRFConnect iOS APP shows pairing request information. But it doesn't shows dialog for me to enter passkey 123456.

[snowuyl]

0550.minimal_log_button_led_power_adv_pairing.zip

[snowuyl]

[snowuyl]

00> *** Booting Zephyr OS build v3.2.99-ncs2 ***
00> Starting button Test example
00> btInit() e
00> bt_passkey_set(123456)
00> _btReady(0) e
00> Bluetooth initialized
00> calling bt_le_adv_start() begin
00> calling bt_le_adv_start() end
00> _btReady(0) x
00> btInit() x
00> Starting button Test example
00> device_is_ready() ok
00> gpio_pin_configure_dt() ok
00> gpio_pin_interrupt_configure_dt() ok
00> Set up button at gpio@50000000 pin 27
00> button state=1
00> start a timer
00> Button pressed or released
00> Button pressed at 399162
00> Connected 76:DC:64:C8:9D:FD (random)[00:00:30.228,149] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
00> Passkey for 76:DC:64:C8:9D:FD (random): 038263Press Button 1 to confirm, Button 2 to reject.[00:01:00.799,835] <err> bt_smp: SMP Timeout
00> Security failed: 76:DC:64:C8:9D:FD (random) level 1 err 9Pairing failed conn: 76:DC:64:C8:9D:FD (random), reason 9

[snowuyl]

I have changed .passkey_confirm to NULL as follows.

static struct bt_conn_auth_cb conn_auth_callbacks = {
.passkey_display = auth_passkey_display,
.passkey_confirm = NULL,
.cancel = auth_cancel,
};

Now nRFConnect iOS APP can show dialog for entering passkey. Thanks for your great support!

[snowuyl]

1817.minimal_log_button_led_power_adv_pairing.zip

[snowuyl]

[snowuyl]

I have another question. nRFConnect iOS APP shows connected even if I enter wrong passkey (e.g. 111111).

[snowuyl]

00> *** Booting Zephyr OS build v3.2.99-ncs2 ***
00> Starting button Test example
00> btInit() e
00> bt_passkey_set(123456)
00> _btReady(0) e
00> Bluetooth initialized
00> calling bt_le_adv_start() begin
00> calling bt_le_adv_start() end
00> _btReady(0) x
00> btInit() x
00> Starting button Test example
00> device_is_ready() ok
00> gpio_pin_configure_dt() ok
00> gpio_pin_interrupt_configure_dt() ok
00> Set up button at gpio@50000000 pin 27
00> button state=1
00> start a timer
00> Button pressed or released
00> Button pressed at 4064315
00> Connected 44:78:DB:9A:A4:3A (random)[00:02:22.595,245] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
00> Passkey for 44:78:DB:9A:A4:3A (random): 123456Security failed: 44:78:DB:9A:A4:3A (random) level 1 err 1Pairing failed conn: 44:78:DB:9A:A4:3A (random), reason 1