Hello Team,
I want to configure P2.07 as UART RX for my custom board.
But when I clear the already assigned property as led2 for this pins from the pin editor gui, I am...
Hi,
I am trying to adding a coded phy support on my device in NCS project.
once I added CONFIG_BT_CTLR_PHY_CODED =y in my config , the ROM size will add more than 7kB...
board : nRF5340
sdk-nrf : v2.7.99-cs2
Zephyr version: 3.6.99
I am following https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/app_dev/bootloaders_dfu/qspi_xip_split_image...
Hello Team,
We are working on custom board using nrf54l15 platform.
If we flash only application code, it works, LED is blinking & BLE advertises. But after adding DFU...
Hello!
I'm currently working with the nRF7002 Wi-Fi chip on a custom board. The MCU used is STM32H573ZIT6, and the software is Zephyr 4.0, specifically using the Wi-Fi shell...
dear everyone!
I order a kit- nRF52 preview DK:
www.nordicsemi.com/.../nRF52-Preview-DK
And i also download nRF52_SDK_0.9.1_3639cc9.zip:
developer.nordicsemi.com...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
Hi All,
I'm using ble_app_uart Application to send some notifications from Peripheral to central device. I'm using API ble_send_string() to send notifications to other...
I have an iOS app which is a central to a peripheral running on an nRF51822. A similar Android app works fine and is able to connect to the peripheral, discover services,...
I couldn't find anything with the search here or google so I felt free to ask.. maybe someone already updated to Windows 10 and can tell if everything works well?
Hi ,
I am trying to advertise HID Keyboard Example forever untill the device is powered off
Please let me know how to do this and also how to power optimise.
Kind...
Can I calculated elapsed time from one event using TIMER1?
If yes,how?I can not find none register which one to read for get counter value(how many ticks have passed since...
Hello, I follow
this page to start the rpi2 for 6lowpan.
when I tried to run RADVD Daemon as follow:
Set IPv6 forwarding (must be present).
sudo echo 1 > /proc...
Hello!
I recently purchased a RedBearLab nRF51822 board where I want to use several DS1820 temperature sensors.
For dealing with the OneWire (1-wire) protocol I found...
