I'm getting the warning about CONFIG_BT_CTLR, but I've gone through and changed to HAS_BT_CTLR. I do have the following:
# Maximum Transmission Unit config
CONFIG_BT_GATT_AUTO_UPDATE_MTU...
The specification for the nRF54L15 states that the typical current consumption for I_TIMER3 (TIMER10 running) is 240 mA/milliamps . The other timer values in the table are...
The Nordic Thingy:91X was initially unable to connect using certain SIMs (e.g., Airtel IoT) due to lack of NB-IoT support or no signal.
After switching to a Jio NB-IoT...
Hi to all,
I am trying to do a ZUTH (Zigbee unified test harness) test run, using the Silabs devices as golden devices (as per CSA recommendation) and nRF 52840 dongles...
Hi
I am trying to port some PWM code from the NRF54L15 it uses HAL access because i have found it has faster writes which are useful for my application (testing latency...
Hello,
I have recently upgraded from v2.9 to v3.0.1 and have noticed that the mesh security has changed from CONFIG_BT_MESH_USES_TINYCRYPT to CONFIG_BT_MESH_USES_MBEDTLS_PSA...
Hello.
We're trying to expose and use the Wifi stack in micropython in our project for the nRF7002. We've managed to get Wifi scanning to work (based on the sample code...
I am able to use pstorage_clear and pstorage_load without any problems, but whenever I try to do a pstorage_store the callback function is not being invoked. This problem...
-Essentially I want to do a device firmware update on to the nrf51422 using my Android phone (the nrf applicaiton). I am using your sample code for a project that my company...
Dear All,
what example would be best starting point for a transparent COM port over the air connection with nrf51422?
We will require 9600baud and there will be custom...
I have been looking at the nRF51822 for a project, and have looked at several designs available on the web for reference (I prefer to plagiarize working stuff rather than...
Hello.
After connecting with a central, ble_evt_dispatch function in main.c receives BLE_EVT_BASE event (0x01) periodically. What is this? It looks like events related with...
Hi,
I´m using a watchdog in my Application. Furthermore I need the ability to use the ota/dfu functionality.
I trigger the bootloader with a simple beacon.
if((memcmp...
The documentation is lacking critical details about what the soft devices do with characteristic data you give it. When you create or update a characteristic you need to give...
Dear Nordic developers,
I want to write 24 bytes constant in Non-volatile Memory. Additionally, I want that this data can only be read by MCU and not being rewritten or...
Hello team,
Just a simple question:
Once a timer is created using app_timer_create method, and using APP_TIMER_MODE_REPEATED as paremeter, is this timer automatically...
With nRF51822, I have a GPIO port configuration function as:
static __INLINE void nrf_gpio_cfg_output_S0D1(uint32_t pin_number)
{
NRF_GPIO->PIN_CNF[pin_number] = (GPIO_PIN_CNF_SENSE_Disabled...
I'm putting an nRF51 into an existing electronic device where I can't change the case at all. That means that my antenna will be very sub-optimal. However, I don't need very...
We are experiencing bizarre, bizarre DFU problems.
I have a custom circuit board with a NRF51822-QFAC - when I initiate a DFU with an iPod touch purchased in the United...
I have a strange problem trying to use timer1 in a trivial app that's loaded via DFU. I can't get delays longer than about 1 second, despite having the prescaler set to 9...
Hello Everybody,
My development board type is Nordic nRF51 - DK pca10028 board link I press Boot/Reset button and plug in the USB cable, then the LED5 is blinking,Now entered...
