I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hello,
We are facing a critical issue with our BLE peripheral product under development crashing during paring/bonding.
The phones used are all different, but the ones...
Hi all,
I want to know if the images inside the hci_dfu_send_hex folder are just precompiled hex files from the examples.
More specific I want to use the bootloader...
Hi
I have 3 nRF52840 DK, just shipped this week.
And two could power on success.
But one failed to power on after connecting with same USB cable.
The LDE5 did not...
Dear all,
I have designed custom board using Raytac mdbt40(nrf51822) module on my board and programming using nrf51DK my setup is like
VnRF: not used
VDD: not used...
He guys,
I'm currently trying to run the secure serial bootloader sample on our hardware which is based on the nrf52832, but the sample code resets the device when starting...
Hi
I develop nrf52840 and nrf52832 of our's RTOS environment(with. GCC).
I want apply mesh protocol with nrf52832 and nrf52840.
I ask,
when does support...
I try create my own app based on buttonless app. I've tested dfu over the air it's ok. But for that I need to firmware bootloader (with security key) before. It's ok for production...
Hi,
I dont get the Light Control example to work. Other examples from the normal SDKs are working.
I have 4x PCA10040 Dev-Kits.
I flashed the example with SEGGER...
We're having a range of issues with a firmware that I cannot detail due to NDA.
Hence we're looking for someone proficient with nRF51/52 using SD130/132 for reviewing/assisting...
Hi,
We can currently nRF51822 beacon kit. I want to know that do you have other beacon kit which have high range and in this large broadcast data can be broadcast ??
...
Good morning.
I use Google Translator to transcribe my articles.
Please understand if the context is not right.
I am currently testing HID Protocol with a mobile phone...
Hi guys,
i'm experimenting with ble_app_multiperipheral example from sdk14 and am having some issues.
I have made some modifications to be able to read and write characteristics...
Hello!
We experience problems trying to connect from Samsung Galaxy A5 (2017) to BL652-SC-01 module that runs serialization on a custom board: the smartphone is stuck at...
Hello, let it be clear that I could be wrong on this, but so far, based on the example provided by the nordic semi, I got the impression that the ble mesh is built almost...
Hello Nordic People,
Today I visited the NordicTechTour in Eindhoven, NL.
At the end we were given the "thingy" - quite interesting and useful hardware thingy.
However...
