I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
When P0.15 is held high, the nrf_cli fails to talk to my computer via serial.
Lowering P0.15 allows all buffered bytes to be sent to my terminal.
Oddly, Pin 15 is not...
Dear Nordic：
I want to build project only using command line tools. So I refer link text to study solution.
I do step by step according to the tutorial .But when I use ...
#define BLE_UUID_OUR_SERVICE 0xABCD // Just a random, but recognizable value
typedef struct
{
uint16_t service_handle; /**< Handle of Our Service (as provided by the...
can anybodulow cost BLE module which can support MESH network with UART port and less power consumption on all modes compared to other brands.
Product/Application: Building...
#define BLE_UUID_OUR_SERVICE 0xABCD // Just a random, but recognizable value
typedef struct
{
uint16_t service_handle; /**< Handle of Our Service (as provided by the...
Is the t2t_lib/t4t_lib source available?
I'm referring to the following binary files:
sdk/components/nfc/t2t_lib/nfc_t2t_lib_gcc.a
sdk/components/nfc/t4t_lib/nfc_t4t_lib_gcc...
i faced with a problem :
i created a private key
then make public key from private key
insert my public key in dfu_public_key.c
build bootloader_secure(debug...
Hi,
I am a newbie in nRF51 application. I am busy with a project which required the peripheral to communicate with the central once per second. Just to make sure that the...
I have a NRF52382 DK and cannot seem to get the fs_store callback to fire.
here is my fs_config callback function:
static uint8_t fs_callback_flag;
void fs_evt_handler...
HI, i m working in a project using mpu6050 and hmc5883l in same chip and nrf52832. indeed, i see that guys face many problem with twi connexion. so i decided to create a self...
Is there a way that I can still flash via SWD, but also have the DFU bootloader installed ?
The moment, as soon as I install the DFU bootloader, I have to upload the app...
Hello,
I am having some trouble properly using UART and my MPU-sensor on a nRF52832-custom-board.
The UART-pins I am trying to use are P0.05 for UART_TX and P0.06 for...
Hi!
For my master's dissertation I am currently investigating the possibilities of Bluetooth Low energy in terms of speed. I am using the Nordic UART service to send as...
