Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
I want to make a PCB with the nRF51422 chip on it. Is there a way of programming it externally using the nRF51-DK? If so, what connections do I need between the PCB and the...
Hi all,
I am finding that the RTT Viewer is very unreliable at changing colour when sent commands from two different nRF52-DK boards. The text is coming out correctly,...
I'm trying to generate pulse oximetry service (PLX) with Bt. Dev. Stud. and NRF5 plugin. PLX Spot-check meas. and PLX featurees characteristics are generated pretty well and...
Greetings,
We've got a product which has a NRF51 device on it, which has since updated the design to NRF52. Both variants have a DFU feature.
For the NRF52 I can positively...
Hello, I'm using nRF51822-mKIT for a research.
I recently posted a question related to "reading ADC value from analog input", having issues with reading proper ADC value...
Hardware: nrf52 DK
Software: SDK v13
I want to use SAADC to sample some analog data (main function of my device), but It seems to be noisy. In attachment spreadsheet with...
When P0.15 is held high, the nrf_cli fails to talk to my computer via serial.
Lowering P0.15 allows all buffered bytes to be sent to my terminal.
Oddly, Pin 15 is not...
Dear Nordic：
I want to build project only using command line tools. So I refer link text to study solution.
I do step by step according to the tutorial .But when I use ...
#define BLE_UUID_OUR_SERVICE 0xABCD // Just a random, but recognizable value
typedef struct
{
uint16_t service_handle; /**< Handle of Our Service (as provided by the...
can anybodulow cost BLE module which can support MESH network with UART port and less power consumption on all modes compared to other brands.
Product/Application: Building...
#define BLE_UUID_OUR_SERVICE 0xABCD // Just a random, but recognizable value
typedef struct
{
uint16_t service_handle; /**< Handle of Our Service (as provided by the...
Is the t2t_lib/t4t_lib source available?
I'm referring to the following binary files:
sdk/components/nfc/t2t_lib/nfc_t2t_lib_gcc.a
sdk/components/nfc/t4t_lib/nfc_t4t_lib_gcc...
i faced with a problem :
i created a private key
then make public key from private key
insert my public key in dfu_public_key.c
build bootloader_secure(debug...
