Due to production requirements, I need to obtain the device's QR code. However, I found that the QR code can only be retrieved using the code snippet below after calling Nrf...
I am trying to create a custom sensor for CT1711 temperature sensor. I have created the sensor driver code and device tree binding, but it won't start (initialize) and the...
Hi,
Is it possible to make the MQTT connected device receive the Shadow config updates and AT Commands immediately? Based from our testing, the device only receives the...
Hi Nordic Support Team,
I'm currently experimenting with Channel Sounding using a couple of nRF54L15 boards.
I am trying to obtain raw I and Q samples so that I may analyze...
Hello,
currently i am configuring the networking stack on my project.
The goal is to use Matter's built-in Thread connection, to establish a Secure CoAP connection. I...
We use several Nordic chips in our BLE sensors. We bond to the devices from Android, connect to update configurations, then disconnect such that the device then advertises...
Hello,
I implemented overall flow related with FDS function including garbage collection,
when I check garbage collection, it is ok, it confirm that the data will be saved...
I have a problem initializing the ble stack when I'm starting my application via a custom bootloader. I'm using the nrf52832 device on a custom board.
My application has...
Hi!
I have interface external piezo element with my ARM controller to get the piezo data. But after sometime my controller is off. I didn't getting why this problem happens...
For ble central devices on nrf52, there are problems with the internal rc slow clock. When I load the project ble_app_uart_c onto the PCA10040, everything works as expected...
Hi, I have a problem with advertising on nrf52840q1aabb chip. I used example code ble_app_template on nrf52840q1aaaa revision and everything works fine but after changing...
Hello,
I have in a multi-sensor application some actual data (including RTC) which appear continuously and which have to be saved in an external RAM connected by I²C. All...
Hello,
I am using 14.0.1 sdk, and hope to use DFU (Secure bootloader),
I am trying to use buttonless app in my app (uart example app),
when copying some codes related...
When I try this demo project, got below information from RTT. Any problem with it? How to deal with it?
Thanks.
RAM START ADDR 0x20002080 should be adjusted to 0x20001FE8...
Does anyone know where the nRF52 Online Power Profiler that is detailed in this blog has been moved to or if it has been deleted? The webpage can no longer be found.
It...
Hi all:
My customer has different IC revision of nrf51422,one is QFAAEx0,the other is QFAAFx0.
I see the "nRF51422 IC revision overview" ,QFAAEx0 is revision-2 ,the...
Hello.
Is it possible to flash 51822 on SDO and SCLK lines using another same chip? Are there any manuals for the SDO / SCLK interface for 51822? Maybe there is already a...
Hi,
We are using SD110 with SDK 7.2.0 in our application
Our application needs to be quite accurate in timing
We set out to determine what the accuracy of the TickTimer...
Hi, the configuration for the 9-axis sensor used in Thingy is interesting where a switch is used to cut the power line from the sensor. From the description:
The motion...
Hello,
I do know that it is a lot of information here in dev zone about this topic but I need a confirmation from a Nordic employee. We had a disscusion at workplace wheter...
I've just read the BLE Mesh documentation, very informative, but I still have some questions related to the concept and implementation, which are:
Can a device toggle...
