Due to production requirements, I need to obtain the device's QR code. However, I found that the QR code can only be retrieved using the code snippet below after calling Nrf...
I am trying to create a custom sensor for CT1711 temperature sensor. I have created the sensor driver code and device tree binding, but it won't start (initialize) and the...
Hi,
Is it possible to make the MQTT connected device receive the Shadow config updates and AT Commands immediately? Based from our testing, the device only receives the...
Hi Nordic Support Team,
I'm currently experimenting with Channel Sounding using a couple of nRF54L15 boards.
I am trying to obtain raw I and Q samples so that I may analyze...
Hello,
currently i am configuring the networking stack on my project.
The goal is to use Matter's built-in Thread connection, to establish a Secure CoAP connection. I...
We use several Nordic chips in our BLE sensors. We bond to the devices from Android, connect to update configurations, then disconnect such that the device then advertises...
I don't understand how the numbers in the nrf_pwm_init are calculated. Specifically these:
case PWM_MODE_LED_100: // 0-100 resolution, 321Hz PWM frequency, 32kHz timer...
I'm trying to repeatedly toggle a GPIOTE on every CC[0] compare within the time period set by CC[1]. CC[1] runs multiple times. Every time CC[1] is reached I want to stop...
Hi! I am looking into your products, and wonder how the workflow is.
Let's say I get the nRF51 DK to develop something reading from a sensor and sending data.
The DK provides...
Hi,
Through this post I got an updated bootloader for the nRF51822 128Kb chip version:
devzone.nordicsemi.com/.../
After the last update of the iOS nRF Toolboox Version...
I got an easy but fundamental question: How to make sure that the central sees the advertising package of the peripheral..
For example when the peripheral advertises only...
Hi,
I'm interested in 256kB Flash / 32kB RAM version of nRF51822 or nRF51422 (chip variant: QFAC/CFAC).
There is a fully integrated 3rd party module (like the BL600 that...
Hi. I am haveing trouble with the SD looseing connection to phone/ipad when I enable a power converter placed closed by. When I sniff the communication with the phone I can...
Hi Nordic Team,
I have designed an module with nRF51822QFAA, and took the reference of nRF51822 Dev-Kit for PCB antenna.
But i was not able to get the performace details...
Hello.
I need to count impulses going to nrf51822 in low power mode. I use the following code to configure GPIOTE and PPI to toggle counter and it works well:
#define...
Hi
I'm having some trouble with the read authorization giving me weird reply values.
In my application, I'm using a custom service called "Light Control" consisting...
Hello, I have inherited a (good) project in which the previous designer implemented a checksum using a value calculated from this:
char* pMemory = 0;
return crc16_ccitt...
If I want to recognize the specific beacon device in the smartphone app, how to read a specific uuid as major, minor beacon in the application?
I know the uuid with a unique...
Hello Everyone,
I want firmware revision to be added in advertisement packet how can i do it . is it ok to add it to manufacturer data or it is nordic proprietary .
...
