Hello, I’m testing a PID controller for a quadcopter. When I compile the application with the optimize for speed then flash, I notice that the PID response is slower than...
Hi,
I have a couple of questions regarding reading the nRF5340 Temperature Sensor. This is a follow-up to the following DevZone ticket: https://devzone.nordicsemi.com/f...
Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I'm working on a solution and facing a few difficulties. well, I have more than 100 smartphones (android and iOS) devices in closed proximity were all the devices are logging...
Hi,
We have an embedded flash of 4Gbit which stores sensor data. The data needs to be transferred to a Smartphone. Now we are using USB cdc acm for transferring data with...
SDK 16.0
52810
S112
From the sample code of SDK we can see that the UART is enabled by code ourself, as the following. However, what's the usage of the NRFX_UARTE_ENABLED...
SDK: 15.3.0 Device: EYSHJNZWZ (nRF52832)
Please tell me the operation when garbage collection is executed. The setting values of FDS are shown below for reference.
We...
I am trying to program my custom board nrf52811 by pca10056 using ses, and i was able to flash any example of nrf_SDK, however the LED does not blink. even though i added...
SDK: 15.3.0 Device: EYSHJNZWZ (nRF52832)
The following contents are described as the description of "FDS_VIRTUAL_PAGES". "One of the virtual pages is reserved by the system...
Hi, I'm trying do drive WS2812B LEDs (aka neopixels) with the I2S peripheral, using method similar to this https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/driving...
Hi,
I want to implement a Single Base UUID with 3 Custom Characteristics. I followed the instructions which are mentioned in the https://github.com/maidenone/custom_ble_service_example...
Hi,
I'm using the I2S for driving a Neopixel (WS2812b) , my code is working properly on the nrf52840DK . but when i flashed it to the adafruit nrf52840 board via the P19...
Hi,
Can you please provide a small UART application for the nRF52 and nRF52840, to communicate with PC application using bluetooth.
The deafult ble_peripheral applications...
I would like to connect an nRF52833 to a host through UART-over-USB. The host needs to be able to update the nRF52. HOWEVER, the host is itself an embedded device, not running...
Hello,
I started following the tutorials in the devzone blog and was really helpful to understand the logic behind the ncs. I got stuck in some issues and would like some...
Kind BLE experts,
Here's some background that you might find interesting. I'm working with a consortium of International teams working on creating IOS and Android apps for...
The ble_app_hhs_freertos example uses nrf_sdh_freertos.c, which in turn, requires that NRF_SDH_DISPATCH_MODEL be set to NRF_SDH_DISPATCH_MODEL_POLING.
Is there a reason...
We are in process to certified a product using the nrf52832. While testing the certification team find an offset greater than 20 ppm, like in the following scree shot:
...
