I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Hi, I'm looking for a simple example on how to implement I2C. I've built I2C on my various FPGA's, implemented I2C on various AVR based chips from special function registers...
Good afternoon,
I first devoloped my app based on the nRF52840 (SDK 15.2; S140 V.6.1.0) and it was perfectly working with or without bonds.
After that, and following what...
I've been doing some development on the nRF Mesh platform for the nRF52832 chipset and I'm relying on the Mesh DFU protocol to update my deployed units. Recently I've been...
We need to know what the total internal capacitance and inductance is for the nRF9160 SIP to comply with intrinsic safety certification. Can anyone point me to this information...
Hi, We have developed a custom board. We can upload code using nrf52840 sdk-ble stack. We can read NRF_LOGS. However when we test with the ble_app_blinky that works fine with...
We have been using gpiote low_accuracy port events on battery powered devices for years without any issues, but now we bumped into a strange issue.
Details: 8 PORT (hi_accuracy...
I have set the host name to my aws thing endpoint name per the instructions on the following link
developer.nordicsemi.com/.../README.html
but the hostname ends up...
To the kind attention of Nordic support team,
after about one year evaluating software using Segger Embedded Studio I'm switching to Keil, basically to evaluate gazell secured...
Hi
I have lost my private key for generating my dfu pakage using nrfutil.
I have 2K nrf Modules chips already programmed with bootloader & dfu enabled firmware. However...
Hello,
I'm having a weird problem while doing a communication between nRF52840( perpherial device ) with USB OTG ( STM32 ).
I'm trying send out the data from USB OTG...
Hi,
We have a production device using the NRF9160 and after several days end up triggering a __bus_fault() that arises likely from memory fragmentation in the heap within...
Hello all.
i am trying to flash a boot loader with arduino IDE. i got the technique from here : https://github.com/sandeepmistry/arduino-nRF5
after doing all steps i am...
We upgrade to the latest Mesh SDK 4.0 but the light server example is behaving differently. We have our own code from an iOS app that provisions the device.
After I provisioning...
Using 840DK and latest Segger (4.42)
Building Mesh DFU example: dfu_nrf52840_xxAA_s140_7_0_1
Latest Mesh SDK v4
Latest SDK 16
Build with no errors, when starting debug...
I want to use the random number API for nRF5340APPLICATION. But I can only choose TEST_RANDOM_GENERATOR. And can not use sys_csrand_get().
How to use RandomAPI for nRF5340Application...
