During the setup process for nRF Connect SDK v2.4.0, an error occurred preventing the SDK from installing correctly.
The environment details are as follows:
* macOS...
Hi,
We are using the nrfconnect for thread and zigbee 3.2.
We have modelled our Bluetooth peripheral, running on the nrf52840, on the BLE UART example. It connects fine...
I have installed nrf-command-line-tools_10.24.2_amd64 and jLink_Linux_V794e_x86_64 on Ubuntu 22.04. I have also installed nrfconnect-5.0.2-x86_64 for desktop and the Toolchain...
Hello,
We have an NCS v2.2.0 nRF5340 application with MCUboot that requires GPIO control of a few pins extremely early in the startup process. We have a signal "A" pulled...
I have enabled RX address 0 only, (value of RXADDRESSES field is 0x01)
But still I got a received package interupt where RXMATCH has a value of 0x07, indicating that I...
Tx Radiated spurious emissions (1-18GHz): should be able to force the radio into a continuous transmit mode on a specific channel. The device should be transmitting with as...
Hello,
the BT specification states the following:
Is this particular requirement to be taken care by Nordic's customer using the BTIC? i.e. LE PHY qualification test...
Hi,
I want to use bsp_event_handler in SDK v11.0.0 . But the code is not getting compiled.
On building, it throws an error "error:#20: identifier "BSP_BUTTON_ACTION_RELEASE...
Hi,
I'm using NRF_LOG to print information via RTT backend (RTT viewer v6.20) and it has been working so far. After adding a single call to a function that reads 128 bytes...
I use one motor to drive one object move back and forth in a straight line, with two hall ic(XC3202) at the boundary points at both ends. The motor turn when the object reaches...
I'm using a central (Adafruit Bluefruit Feather nrf52) and peripheral (Adafruit Bluefruit 32u4) device for BLE communication. Peripheral is acting as remote, to turn on relays...
Hi,
I'm trying to adapt this example to use the latest mesh SDK version.
I have checked the other example which uses version 2.2.0 but the other one is perfect as a starting...
I am trying to build the writable_ndef_msg example from the nRF5_SDK_15.2.0. I am using IAR'e Embedded Workbench (ARM v8.30.1) and I get the following Linker Error:
Error...
Hi,
We're using bonding between our peripheral HID device and 3rd party central devices. Our device runs on a 52832 board with SDK 14.0.0 and SD 5.0.0.
We've run into...
My development environment is sdk15 s132 pca10040
The product concept provides central link 7, peripheral 1 on one 52832 ..
1 peripheral provides nus to work with smartphones...
I have a BLE device that runs nrf51. I have an rpi3 and I want them to communicate with each other via BLE communication.
I understand that I need to develop a python application...
